[lkml]   [2014]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] rt2800usb: Fix support for USB 057c:8501
The usb wifi device AVM Fritz Stick N v2b (USB 057c:8501) is listed as supported by rt2800usb, but loading the driver fails for me (kernel 3.15-rc7 and older).

ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset 0x0000 with error -32
ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
rt2800usb: probe of 1-1.3:1.0 failed with error -32
usbcore: registered new interface driver rt2800usb

>From searching the web, it looks like other users using the same device are hit by this error too, and some users of similar devices using the same driver experience similar errors.

I've tested these patches using a USB 057c:8501 wifi device in client mode (scanning + connect to WPA protected BSS + network access). With the patches applied, the device works fine. Without, it fails.
I've also tested that USB 148f:5370 (which is another usb wifi device using the same driver), which worked also without these patches applied, still works after applying these patches.

M. Braun

v2: fix endianness and coding style. Using rt2x00usb_register_read does not work for me.


Michael Braun (2):
rt2800usb:fix efuse detection
rt2800usb:fix hang during firmware load

drivers/net/wireless/rt2x00/rt2800usb.c | 39 +++++++++++++++++++++++++++++--
drivers/net/wireless/rt2x00/rt2x00usb.h | 1 +
2 files changed, 37 insertions(+), 3 deletions(-)

 \ /
  Last update: 2014-06-12 20:21    [W:0.037 / U:10.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site