lkml.org 
[lkml]   [2014]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] leds: USB: HID: Add support for MSI GT683R led panels
On Thu, Jun 12, 2014 at 01:48:41AM +0300, Janne Kanniainen wrote:
> This driver adds support for USB controlled led panels that exists in MSI GT683R laptop

You forgot to break this line.

>
> Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com>
> ---
> Changes in v2:
> - sorted headers to alphabetic order
> - using devm_kzalloc
> - using BIT(n)
> - using usb_control_msg instead of usb_submit_urb
> - removing unneeded code
>
> Changes in v3:
> - implemented as HID device
> - some cleanups and bug fixes
>
> Changes in v4:
> - more cleanups
> - support for selecting leds
> - support for selecting status

That was fast. :)

>
> drivers/hid/Kconfig | 11 ++
> drivers/hid/Makefile | 1 +
> drivers/hid/hid-core.c | 1 +
> drivers/hid/hid-gt683r.c | 320 ++++++++++++++++++++++++++++++++++++++++
> drivers/hid/hid-ids.h | 2 +-
> drivers/hid/usbhid/hid-quirks.c | 2 +-
> 6 files changed, 335 insertions(+), 2 deletions(-)
> create mode 100644 drivers/hid/hid-gt683r.c
>
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 7af9d0b..d93e0ae 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -261,6 +261,17 @@ config HOLTEK_FF
> Say Y here if you have a Holtek On Line Grip based game controller
> and want to have force feedback support for it.
>
> +config HID_GT683R
> + tristate "MSI GT68xR LED support"
> + depends on LEDS_CLASS && USB_HID
> + ---help---
> + Say Y here if you want to enable support for the MSI GT68xR LEDS
> +
> + This driver support following states normal, breathing and audio.
> + You can also select which leds you want to enable.
> + Currently the following devices are know to be supported:
> + - MSI GT683R
> +
> config HID_HUION
> tristate "Huion tablets"
> depends on USB_HID
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index fc712dd..7129311 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
> obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
> obj-$(CONFIG_HID_ELO) += hid-elo.o
> obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
> +obj-$(CONFIG_HID_GT683R) += hid-gt683r.o
> obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
> obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
> obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index da52279..ec88fdb 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -1827,6 +1827,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
> { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
> { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
> { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },
> diff --git a/drivers/hid/hid-gt683r.c b/drivers/hid/hid-gt683r.c
> new file mode 100644
> index 0000000..04e4cc2
> --- /dev/null
> +++ b/drivers/hid/hid-gt683r.c
> @@ -0,0 +1,320 @@
> +/*
> + * MSI GT683R led driver
> + *
> + * Copyright (c) 2014 Janne Kanniainen <janne.kanniainen@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/device.h>
> +#include <linux/hid.h>
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +
> +#include "hid-ids.h"
> +
> +#define GT683R_LED_BACK BIT(0)
> +#define GT683R_LED_SIDE BIT(1)
> +#define GT683R_LED_FRONT BIT(2)
> +
> +#define GT683R_BUFFER_SIZE 8
> +
> +/*
> + * GT683R_LED_OFF: all LEDs are off
> + * GT683R_LED_AUDIO: the status of LEDs depends
> + * on sound level
> + * GT683R_LED_BREATHING: LEDs brightness varies
> + * at human breathing rate
> + * GT683R_LED_NORMAL: LEDs are on
> + */
> +enum gt683r_led_state {
> + GT683R_LED_OFF = 0,
> + GT683R_LED_AUDIO = 2,
> + GT683R_LED_BREATHING = 3,
> + GT683R_LED_NORMAL = 5
> +};
> +
> +struct gt683r_led {
> + struct hid_device *hdev;
> + struct led_classdev led_dev_back;
> + struct led_classdev led_dev_side;
> + struct led_classdev led_dev_front;

You could store these as an array, and add an enum for back, side, and
front (more below).

> + struct mutex lock;
> + struct mutex state_lock;

You should be able to use only one lock.

> + struct work_struct work;
> + enum led_brightness brightness_back;
> + enum led_brightness brightness_side;
> + enum led_brightness brightness_front;

These could then also be in an array.

> + enum gt683r_led_state state;
> +};
> +
> +static const struct hid_device_id gt683r_led_id[] = {
> + { HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
> + { }
> +};
> +
> +#define GT683R_BRIGHTNESS_SET(name) \
> +static void gt683r_brightness_set_##name(struct led_classdev *led_cdev, \
> + enum led_brightness brightness) \
> +{ \
> + struct gt683r_led *led = \
> + container_of(led_cdev, struct gt683r_led, \
> + led_dev_##name); \
> + \
> + led->brightness_##name = brightness; \
> + \
> + schedule_work(&led->work); \
> +}
> +
> +GT683R_BRIGHTNESS_SET(back);
> +GT683R_BRIGHTNESS_SET(side);
> +GT683R_BRIGHTNESS_SET(front);

This is one way of solving this, but it's better to have one
set_brightness function and determine which led it is called for by
accessing the driver data of the hid device (via the parent device) and
iterate over the available leds. See drivers/hid/hid-lg4ff.c for an
example of how this can be implemented.

> +
> +static ssize_t gt683r_show_state(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct hid_device *hdev =
> + container_of(dev, struct hid_device, dev);
> + struct gt683r_led *led = hid_get_drvdata(hdev);
> +
> + if (led->state == GT683R_LED_OFF)
> + return sprintf(buf, "off\n");

You should always use scnprintf (with a size of PAGE_SIZE) in show
callbacks.

> + else if (led->state == GT683R_LED_AUDIO)
> + return sprintf(buf, "audio\n");
> + else if (led->state == GT683R_LED_BREATHING)
> + return sprintf(buf, "breathing\n");
> + else
> + return sprintf(buf, "normal\n");
> +}

Ok, so the blink mode (or type rather than state, I understand now --
sorry for the confusion) is common for all three LEDs.

You shouldn't allow the LEDs to be disabled through this attribute, but
rather set the mode that will be used for any enabled LEDs (e.g. the
attribute should only have three possible values).

Would it even be sufficient to only set the blink mode (type, state) to
NORMAL at probe and then only update it if it changes (in store_state
below)? In particular, will all three LEDs stay off if they are masked
out in gt683r_let_set? (Otherwise, you could only set OFF mode when all
three LEDs are disabled.)

Note that any new attribute has to be documented under
Documentation/ABI.

> +
> +static ssize_t gt683r_store_state(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct hid_device *hdev =
> + container_of(dev, struct hid_device, dev);
> + struct gt683r_led *led = hid_get_drvdata(hdev);
> +
> + mutex_lock(&led->state_lock);
> + if (!strncmp("off", buf, strlen("off"))) {
> + led->state = GT683R_LED_OFF;
> + } else if (!strncmp("audio", buf, strlen("audio"))) {
> + led->state = GT683R_LED_AUDIO;
> + } else if (!strncmp("breathing", buf, strlen("breathing"))) {
> + led->state = GT683R_LED_BREATHING;
> + } else if (!strncmp("normal", buf, strlen("normal"))) {
> + led->state = GT683R_LED_NORMAL;
> + } else {
> + count = -EINVAL;
> + goto fail;
> + }
> +
> + schedule_work(&led->work);
> +
> +fail:
> + mutex_unlock(&led->state_lock);
> +
> + return count;
> +}

I think you should use an integer value (and snprintf) for the three
modes (e.g. 0: normal, 1: audio, 2: breathing) and just document that
in the ABI files mentioned above.

> +
> +static int gt683r_led_snd_msg(struct gt683r_led *led, char *msg)

I didn't notice before, but you should be using the unsigned u8 type for
msg (and leds and state below).

> +{
> + int ret;
> +
> + ret = hid_hw_raw_request(led->hdev, msg[0], msg, GT683R_BUFFER_SIZE,
> + HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
> + if (ret != GT683R_BUFFER_SIZE) {
> + hid_err(led->hdev,
> + "failed to send set report request: %i\n", ret);
> + return ret < 0 ? ret : -EIO;

I try to avoid ?: constructs.

> + }
> +
> + return 0;
> +}
> +
> +static void gt683r_led_set(struct gt683r_led *led, char leds, char state)
> +{
> + char *buffer;
> +
> + buffer = kzalloc(GT683R_BUFFER_SIZE, GFP_KERNEL);
> + if (!buffer)
> + return;
> +
> + buffer[0] = 0x01;
> + buffer[1] = 0x02;
> + buffer[2] = 0x30;
> + buffer[3] = leds;
> + if (gt683r_led_snd_msg(led, buffer))
> + goto fail;
> +
> + buffer[2] = 0x20;
> + buffer[3] = state;
> + buffer[4] = 0x01;
> + gt683r_led_snd_msg(led, buffer);
> +
> +fail:
> + kfree(buffer);
> +}
> +
> +static void gt683r_led_work(struct work_struct *work)
> +{
> + struct gt683r_led *led =
> + container_of(work, struct gt683r_led, work);
> + char leds = 0;
> +
> + mutex_lock(&led->lock);
> +
> + if (led->brightness_back)
> + leds |= GT683R_LED_BACK;
> +
> + if (led->brightness_side)
> + leds |= GT683R_LED_SIDE;
> +
> + if (led->brightness_front)
> + leds |= GT683R_LED_FRONT;
> +
> + if (leds)
> + gt683r_led_set(led, leds, led->state);
> + else
> + gt683r_led_set(led, leds, GT683R_LED_OFF);
> +
> + mutex_unlock(&led->lock);
> +}
> +
> +static struct led_classdev gt683r_led_dev_back = {
> + .name = "gt683r-led:back",
> + .brightness_set = gt683r_brightness_set_back,
> + .max_brightness = 1,
> + .flags = LED_CORE_SUSPENDRESUME,
> +};
> +
> +static struct led_classdev gt683r_led_dev_side = {
> + .name = "gt683r-led:side",
> + .brightness_set = gt683r_brightness_set_side,
> + .max_brightness = 1,
> + .flags = LED_CORE_SUSPENDRESUME,
> +};
> +
> +static struct led_classdev gt683r_led_dev_front = {
> + .name = "gt683r-led:front",
> + .brightness_set = gt683r_brightness_set_front,
> + .max_brightness = 1,
> + .flags = LED_CORE_SUSPENDRESUME,
> +};

You should remove these three as you only use them for initialising the
dynamically allocated instances, which could be initialised directly in
probe instead.

You can find examples of this under drivers/hid (e.g.
drivers/hid/hid-lg4ff.c) including how to initialise the name field.
Note that the recommended naming scheme is "devicename:colour:function",
but you can leave the colour out (but still keep the two ':').

> +
> +static struct device_attribute gt683r_led_state_attribute = {
> + .attr = {
> + .name = "state",
> + .mode = 0644,
> + },
> + .show = gt683r_show_state,
> + .store = gt683r_store_state,
> +};

You should use the DEVICE_ATTR macro instead.

> +
> +static int gt683r_led_probe(struct hid_device *hdev,
> + const struct hid_device_id *id)
> +{
> + int ret;
> + struct gt683r_led *led;
> +
> + led = devm_kzalloc(&hdev->dev, sizeof(struct gt683r_led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + led->hdev = hdev;
> + hid_set_drvdata(hdev, led);
> +
> + ret = hid_parse(hdev);
> + if (ret) {
> + hid_err(hdev, "hid parsing failed\n");
> + goto fail;
> + }
> +
> + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
> + if (ret) {
> + hid_err(hdev, "hw start failed\n");
> + goto fail;
> + }
> +
> + led->led_dev_back = gt683r_led_dev_back;
> + ret = led_classdev_register(&hdev->dev, &led->led_dev_back);
> + if (ret) {
> + hid_err(hdev, "could not register led device\n");
> + goto fail_back;
> + }
> +
> + led->led_dev_side = gt683r_led_dev_side;
> + ret = led_classdev_register(&hdev->dev, &led->led_dev_side);
> + if (ret) {
> + hid_err(hdev, "could not register led device\n");
> + goto fail_side;
> + }
> +
> + led->led_dev_front = gt683r_led_dev_front;
> + ret = led_classdev_register(&hdev->dev, &led->led_dev_front);
> + if (ret) {
> + hid_err(hdev, "could not register led device\n");
> + goto fail_front;
> + }

With the enum an arrays mentioned above this could be implemented as a
loop.

> +
> + ret = device_create_file(&led->hdev->dev,
> + &gt683r_led_state_attribute);
> + if (ret) {
> + hid_err(hdev, "could not make state attribute file\n");
> + goto fail_create_file;
> + }
> +
> + mutex_init(&led->lock);
> + mutex_init(&led->state_lock);
> + INIT_WORK(&led->work, gt683r_led_work);
> +
> + return 0;
> +
> +fail_create_file:
> + led_classdev_unregister(&led->led_dev_front);
> +fail_front:
> + led_classdev_unregister(&led->led_dev_side);
> +fail_side:
> + led_classdev_unregister(&led->led_dev_back);

...with a roll-back loop here.

> +fail_back:
> + hid_hw_stop(hdev);
> +fail:
> + return ret;
> +}
> +
> +static void gt683r_led_remove(struct hid_device *hdev)
> +{
> + struct gt683r_led *led = hid_get_drvdata(hdev);
> +
> + led_classdev_unregister(&led->led_dev_side);
> + led_classdev_unregister(&led->led_dev_back);
> + led_classdev_unregister(&led->led_dev_front);
> + cancel_work_sync(&led->work);
> + device_remove_file(&hdev->dev,
> + &gt683r_led_state_attribute);
> + hid_hw_stop(hdev);
> +}
> +
> +static struct hid_driver gt683r_led_driver = {
> + .probe = gt683r_led_probe,
> + .remove = gt683r_led_remove,
> + .name = "gt683r_led",
> + .id_table = gt683r_led_id,
> +};
> +
> +module_hid_driver(gt683r_led_driver);
> +
> +MODULE_AUTHOR("Janne Kanniainen");
> +MODULE_DESCRIPTION("MSI GT683R led driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 34bb220..3692d37 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -641,7 +641,7 @@
> #define USB_DEVICE_ID_GENIUS_KB29E 0x3004
>
> #define USB_VENDOR_ID_MSI 0x1770
> -#define USB_DEVICE_ID_MSI_GX680R_LED_PANEL 0xff00
> +#define USB_DEVICE_ID_MSI_GT683R_LED_PANEL 0xff00
>
> #define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
> #define USB_DEVICE_ID_N_S_HARMONY 0xc359
> diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
> index 8e4ddb3..c640e1d 100644
> --- a/drivers/hid/usbhid/hid-quirks.c
> +++ b/drivers/hid/usbhid/hid-quirks.c
> @@ -73,7 +73,7 @@ static const struct hid_blacklist {
> { USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
> { USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
> { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
> - { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
> + { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
> { USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },
> { USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
> { USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },

Thanks,
Johan


\
 
 \ /
  Last update: 2014-06-12 11:41    [W:0.123 / U:28.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site