lkml.org 
[lkml]   [2014]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC] printk: allow increasing the ring buffer depending on the number of CPUs
On Wed, Jun 11, 2014 at 11:34:47AM +0200, Petr Mládek wrote:
> On Tue 2014-06-10 18:04:45, Luis R. Rodriguez wrote:
> > From: "Luis R. Rodriguez" <mcgrof@suse.com>
> > diff --git a/init/Kconfig b/init/Kconfig
> > index 9d3585b..1814436 100644
> > --- a/init/Kconfig
> > +++ b/init/Kconfig
> > @@ -806,6 +806,34 @@ config LOG_BUF_SHIFT
> > 13 => 8 KB
> > 12 => 4 KB
> >
> > +config LOG_CPU_BUF_SHIFT
> > + int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
> > + range 0 21
> > + default 0
> > + help
> > + The kernel ring buffer will get additional data logged onto it
> > + when multiple CPUs are supported. Typically the contributions is a
> > + few lines when idle however under under load this can vary and in the
> > + worst case it can mean loosing logging information. You can use this
> > + to set the maximum expected mount of amount of logging contribution
> > + under load by each CPU in the worst case scenerio. Select a size as
> > + a power of 2. For example if LOG_BUF_SHIFT is 18 and if your
> > + LOG_CPU_BUF_SHIFT is 12 your kernel ring buffer size will be as
> > + follows having 16 CPUs as possible.
> > +
> > + ((1 << 18) + ((16 - 1) * (1 << 12))) / 1024 = 316 KB
>
> It might be better to use the CPU_NUM-specific value as a minimum of
> the needed space. Linux distributions might want to distribute kernel
> with non-zero value and still use the static "__log_buf" on reasonable
> small systems.

Not sure if I follow what you mean by CPU_NUM-specific, can you elaborate?
The default in this patch is to ignore this, do you mean that upstream
should probably default to a non-zero value here and then let distributions
select 0 for some kernel builds ? If so then perhaps adding a sysctl
override value might be good to allow only small systems to override
this to 0?

> > + Where as typically you'd only end up with 256 KB. This is disabled
> > + by default with a value of 0.
>
> I would add:
>
> This value is ignored when "log_buf_len" commandline parameter
> is used. It forces the exact size of the ring buffer.

Good point, I've amended this in.

> > + Examples:
> > + 17 => 128 KB
> > + 16 => 64 KB
> > + 15 => 32 KB
> > + 14 => 16 KB
> > + 13 => 8 KB
> > + 12 => 4 KB
>
> I think that we should make it more cleat that it is per-CPU here,
> for example:
>
> 17 => 128 KB for each CPU
> 16 => 64 KB for each CPU
> 15 => 32 KB for each CPU
> 14 => 16 KB for each CPU
> 13 => 8 KB for each CPU
> 12 => 4 KB for each CPU

Thanks, amended as well.

> > diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
> > index 7228258..2023424 100644
> > --- a/kernel/printk/printk.c
> > +++ b/kernel/printk/printk.c
> > @@ -246,6 +246,7 @@ static u32 clear_idx;
> > #define LOG_ALIGN __alignof__(struct printk_log)
> > #endif
> > #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
> > +#define __LOG_CPU_BUF_LEN (1 << CONFIG_LOG_CPU_BUF_SHIFT)
> > static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
> > static char *log_buf = __log_buf;
> > static u32 log_buf_len = __LOG_BUF_LEN;
> > @@ -752,9 +753,10 @@ void __init setup_log_buf(int early)
> > unsigned long flags;
> > char *new_log_buf;
> > int free;
> > + int cpu_extra = (num_possible_cpus() - 1) * __LOG_CPU_BUF_LEN;
> >
> > - if (!new_log_buf_len)
> > - return;
> > + if (!new_log_buf_len && cpu_extra > 1)
> > + new_log_buf_len = __LOG_BUF_LEN + cpu_extra;
>
> We still should return when both new_log_buf_len and cpu_extra are
> zero and call here:
>
> if (!new_log_buf_len)
> return;

The check for cpu_extra > 1 does that -- the default in the patch was 0
and 1 << 0 is 1, so if in the case that the default is used we'd bail
just like before. Or did I perhaps miss what you were saying here?

> Also I would feel more comfortable if we somehow limit the maximum
> size of cpu_extra.

Michal had similar concerns and I thought up to limit it to 1024 max
CPUs, but after my second implementation I did some math on the values
that would be used if say LOG_CPU_BUF_SHIFT was 12, it turns out to not
be *that* bad for even huge num_possible_cpus(). For example for 4096
num_possible_cpus() this comes out to with LOG_BUF_SHIFT of 18:


((1 << 18) + ((4096 - 1) * (1 << 12))) / 1024 = 16636 KB

~16 MB doesn't seem that bad for such a monster box which I'd presume
would have an insane amount of memory. If this logic however does
seems unreasonable and we should cap it -- then by all means lets
pick a sensible number, its just not clear to me what that number
should be. Another reason why I stayed away from capping this was
that we'd then likely end up capping this in the future, and I was
trying to find a solution that would not require mucking as
technology evolves. The reasoning above is also why I had opted to
make the default to 0, only distributions would have a good sense
of what might be reasonable, which I guess begs more for a sysctl
value here.

> I wonder if there might be a crazy setup with a lot
> of possible CPUs and possible memory but with some minimal amount of
> CPUs and memory at the boot time.

When I tested disabling smp I saw the log was still amended to include
information about the disabled CPUs, I however hadn't tested on a machine
with hot pluggable CPUs and with tons of CPUs disabled, so not sure if
that adds more info as well. This also though points more to this being
more a system specific thing, which is another reason to perhaps keep this
disabled and leave this instead as a system config?

> The question is how to do it. I am still not much familiar with the
> memory subsystem. I wonder if 10% of memory defined by the
> "total_rampages" variable would be a reasonable limit.

Not sure either, curious if Mel might have a suggestion?

>
> > if (early) {
> > new_log_buf =
> > --
> > 2.0.0.rc3.18.g00a5b79
> >
>
> > LocalWords: buf len cpu boottime

What's this? :)

Luis
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-06-12 00:01    [W:0.637 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site