lkml.org 
[lkml]   [2014]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 5/7] mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
From
Paul,

On Wed, Jun 11, 2014 at 3:37 AM, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Tue, 2014-05-20 at 09:46 +0100, Lee Jones wrote:
>> On Wed, 30 Apr 2014, Doug Anderson wrote:
>> > From: Bill Richardson <wfrichar@chromium.org>
>> >
>> > This just updates include/linux/mfd/cros_ec_commands.h to match the
>> > latest EC version (which is the One True Source for such things). See
>> > <https://chromium.googlesource.com/chromiumos/platform/ec>

I believe most of your questions are answered by checking out the git
tree referenced above. ...but see below for details. This header is
a common interface between the kernel and the EC.


>> > [dianders: took today's ToT version from the Chromium OS EC; deleted
>> > references to cros_ec_dev and cros_ec_lpc since those aren't upstream
>> > yet]
>> >
>> > Signed-off-by: Bill Richardson <wfrichar@chromium.org>
>> > Signed-off-by: Doug Anderson <dianders@chromium.org>
>> > Acked-by: Lee Jones <lee.jones@linaro.org>
>> > Reviewed-by: Simon Glass <sjg@chromium.org>
>> > Tested-by: Andrew Bresticker <abrestic@chromium.org>
>> > Tested-by: Stephen Warren <swarren@nvidia.com>
>> > ---
>> > Changes in v3: None
>> > Changes in v2: None
>> >
>> > drivers/mfd/cros_ec.c | 2 +-
>> > include/linux/mfd/cros_ec.h | 4 +-
>> > include/linux/mfd/cros_ec_commands.h | 1128 +++++++++++++++++++++++++++++++---
>> > 3 files changed, 1059 insertions(+), 75 deletions(-)
>>
>> Applied, thanks.
>
> This patch is included in linux-next since next-20140521. I'm not sure
> why I waited three weeks before sending this question...
>
>> > [...]
>> > diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
>> > index 86fd069..7853a64 100644
>> > --- a/include/linux/mfd/cros_ec_commands.h
>> > +++ b/include/linux/mfd/cros_ec_commands.h
>>> [...]
>> > @@ -1206,14 +1865,231 @@ struct ec_params_force_idle {
>> > [...]
>> > +/*
>> > + * Known param numbers are defined here. Ranges are reserved for board-specific
>> > + * params, which are handled by the particular implementations.
>> > + */
>> > +enum charge_state_params {
>> > + CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */
>> > + CS_PARAM_CHG_CURRENT, /* charger current limit */
>> > + CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */
>> > + CS_PARAM_CHG_STATUS, /* charger-specific status */
>> > + CS_PARAM_CHG_OPTION, /* charger-specific options */
>> > + /* How many so far? */
>> > + CS_NUM_BASE_PARAMS,
>> > +
>> > + /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */
>
> CONFIG_CHARGER_PROFILE_OVERRIDE doesn't match anything in linux-next. Is
> a Kconfig symbol CHARGER_PROFILE_OVERRIDE perhaps queued somewhere?

This is a config option on the ChromeOS EC
<https://chromium.googlesource.com/chromiumos/platform/ec>. Doing a
grep there:

board/samus/board.h:#define CONFIG_CHARGER_PROFILE_OVERRIDE
common/charge_state_v2.c:#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
common/charge_state_v2.c:#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
common/charge_state_v2.c:#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
driver/battery/samus.c:#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE
driver/battery/samus.c:#endif /* CONFIG_CHARGER_PROFILE_OVERRIDE */
include/config.h:#undef CONFIG_CHARGER_PROFILE_OVERRIDE
include/ec_commands.h: /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */
test/test_config.h:#define CONFIG_CHARGER_PROFILE_OVERRIDE


>> > + CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
>> > + CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
>> > +
>
> I guess so, because these two constants aren't used anywhere.

A grep from the EC sources:

common/charge_state_v2.c: if (in->get_param.param >=
CS_PARAM_CUSTOM_PROFILE_MIN &&
common/charge_state_v2.c: if (in->set_param.param >=
CS_PARAM_CUSTOM_PROFILE_MIN &&
driver/battery/samus.c:#define PARAM_FASTCHARGE
(CS_PARAM_CUSTOM_PROFILE_MIN + 0)
include/ec_commands.h: CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
test/sbs_charging_v2.c: if (param == CS_PARAM_CUSTOM_PROFILE_MIN) {
test/sbs_charging_v2.c: if (param == CS_PARAM_CUSTOM_PROFILE_MIN) {
test/sbs_charging_v2.c: params.get_param.param = CS_PARAM_CUSTOM_PROFILE_MIN;
test/sbs_charging_v2.c: params.set_param.param = CS_PARAM_CUSTOM_PROFILE_MIN;
util/ectool.c: printf(" 0x%x - 0x%x\n", CS_PARAM_CUSTOM_PROFILE_MIN,

-Doug


\
 
 \ /
  Last update: 2014-06-11 18:01    [W:0.085 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site