lkml.org 
[lkml]   [2014]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/2] i2c/ACPI: Support for multiple serial bus addresses
On Thu, Apr 10, 2014 at 09:15:16PM -0700, Srinivas Pandruvada wrote:
> ACPI specification allows multiple i2c addresses defined under one
> ACPI device object. These addresses are defined using _CRS method.
> The current implementation will pickup the last entry in _CRS, and
> create an i2C device, ignoring all other previous entries for addresses.
>
> The ACPI specification does not define, whether these addresses for one
> i2c device or for multiple i2c devices, which are defined under the same
> ACPI device object. We need some appoach where i2c clients can enumerate
> on each of the i2C address and/or have access to those extra addresses.
>
> This change addresses both cases:
> - Create a new i2c device for each i2c address
> - Allow each i2 client to get addresses of all other devices under
> the same ACPI device object (companions or siblings)
>
> Example 1:
> Here in the following example, there are two i2C address in _CRS.
> They belong to two different physical chipsets, with two different i2c
> address but part of a module.
> Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
> {
> Name (RBUF, ResourceTemplate ()
> {
> I2cSerialBus (0x0068, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2C5",
> 0x00, ResourceConsumer, ,
> )
> I2cSerialBus (0x000C, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2C5",
> 0x00, ResourceConsumer, ,
> )
> Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
> {
> 0x00000044,
> }
> })
> Return (RBUF)
> }
> This change adds i2c_new_device for each i2c address. Here contents of
> /sys/bus/i2c/devices will
> i2c-some_acpi_dev_name:00:068
> i2c-some_acpi_dev_name::00:00c
>
> Example 2
>
> Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
> {
> Name (SBUF, ResourceTemplate ()
> {
> GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
> "\\_SB.GPO1", 0x00, ResourceConsumer, ,
> )
> { // Pin list
> 0x0018
> }
> I2cSerialBus (0x0010, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2C4",
> 0x00, ResourceConsumer, ,
> )
> I2cSerialBus (0x000C, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2C4",
> 0x00, ResourceConsumer, ,
> )
> I2cSerialBus (0x0054, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2C4",
> 0x00, ResourceConsumer, ,
> )
> })
> Return (SBUF) /* \_SB_.I2C4.CAM1._CRS.SBUF */
> }
> }
> Here there are three i2c addresses for this device.

How does the client driver see this?

If I have a device that has multiple addresses but it is the same
physical device, how does the driver deal with it? For example how
drivers/misc/eeprom/at24.c could take advantage of this?

I also think that this needs to documented somewhere under
Documentation/i2c/* or so.

> When there is only I2cSerialBus address is present then there is no
> change. The device name will not include address. In this way if
> some device is using hardcoded path, this change will not impact them.
>
> Here any i2c client driver simply need to add ACPI bindings. They will
> be probed multiple times, the client will bind to correct i2c device,
> based on checking its identity and returning error for other.
> At the same time, any i2c client can call i2c_for_each_acpi_comp_client
> to get the i2c client instances of companion addresses defined
> under the same ACPI device.
>
> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
> drivers/i2c/i2c-core.c | 111 ++++++++++++++++++++++++++++++++++++++++++-------
> include/linux/i2c.h | 13 ++++++
> 2 files changed, 109 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index 5fb80b8..a69a7b4 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -627,7 +627,7 @@ static void i2c_dev_set_name(struct i2c_adapter *adap,
> struct acpi_device *adev = ACPI_COMPANION(&client->dev);
>
> if (adev) {
> - dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
> + dev_set_name(&client->dev, "i2c-%s", client->name);
> return;
> }
>
> @@ -1080,24 +1080,44 @@ static void of_i2c_register_devices(struct i2c_adapter *adap) { }
> /* ACPI support code */
>
> #if IS_ENABLED(CONFIG_ACPI)
> +/*
> + * acpi_i2c_add_resource is a callback, which is called while walking
> + * name spaces, adding a limit allows for faster processing, without
> + * using reallocation,
> + * Adding some limit for max adresses in resource. Currently we see
> + * max only 3 addresses, so 20 is more than enough
> + */
> +#define MAX_CRS_ELEMENTS 20
> +struct i2c_resource_info {
> + unsigned short addr[MAX_CRS_ELEMENTS];
> + unsigned short flags[MAX_CRS_ELEMENTS];
> + int count;
> + int common_irq;
> +};
> +
> static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
> {
> - struct i2c_board_info *info = data;
> + struct i2c_resource_info *rcs_info = data;
>
> if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
> struct acpi_resource_i2c_serialbus *sb;
>
> sb = &ares->data.i2c_serial_bus;
> if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
> - info->addr = sb->slave_address;
> + if (rcs_info->count >= MAX_CRS_ELEMENTS)
> + return 1; /* Simply ignore adding */
> + rcs_info->addr[rcs_info->count] =
> + sb->slave_address;
> if (sb->access_mode == ACPI_I2C_10BIT_MODE)
> - info->flags |= I2C_CLIENT_TEN;
> + rcs_info->flags[rcs_info->count] =
> + I2C_CLIENT_TEN;
> + rcs_info->count++;
> }
> - } else if (info->irq < 0) {
> + } else if (rcs_info->common_irq < 0) {
> struct resource r;
>
> if (acpi_dev_resource_interrupt(ares, 0, &r))
> - info->irq = r.start;
> + rcs_info->common_irq = r.start;
> }
>
> /* Tell the ACPI core to skip this resource */
> @@ -1111,7 +1131,10 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
> struct list_head resource_list;
> struct i2c_board_info info;
> struct acpi_device *adev;
> + struct i2c_resource_info rcs_info;
> + struct i2c_client *i2c_client;
> int ret;
> + int i;
>
> if (acpi_bus_get_device(handle, &adev))
> return AE_OK;
> @@ -1120,23 +1143,42 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
>
> memset(&info, 0, sizeof(info));
> info.acpi_node.companion = adev;
> - info.irq = -1;
> +
> + memset(&rcs_info, 0, sizeof(rcs_info));
> + rcs_info.common_irq = -1;
>
> INIT_LIST_HEAD(&resource_list);
> ret = acpi_dev_get_resources(adev, &resource_list,
> - acpi_i2c_add_resource, &info);
> + acpi_i2c_add_resource, &rcs_info);
> acpi_dev_free_resource_list(&resource_list);
>
> - if (ret < 0 || !info.addr)
> + if (ret < 0)
> return AE_OK;
>
> adev->power.flags.ignore_parent = true;
> - strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
> - if (!i2c_new_device(adapter, &info)) {
> - adev->power.flags.ignore_parent = false;
> - dev_err(&adapter->dev,
> - "failed to add I2C device %s from ACPI\n",
> - dev_name(&adev->dev));
> + info.irq = rcs_info.common_irq;
> + for (i = 0; i < rcs_info.count; ++i) {

Instead of this, would it make sense if you do the device creation in
acpi_i2c_add_resource() for each enumerated device?

At least it would look better than this ;-)

> + if (!rcs_info.addr[i])
> + continue;
> + info.addr = rcs_info.addr[i];
> + info.flags = rcs_info.flags[i];
> + /* Status quo, when only one address is present */
> + if (rcs_info.count > 1)
> + snprintf(info.type, sizeof(info.type), "%s:%03x",
> + dev_name(&adev->dev),
> + info.addr);
> + else
> + strlcpy(info.type, dev_name(&adev->dev),
> + sizeof(info.type));
> + i2c_client = i2c_new_device(adapter, &info);
> + if (!i2c_client) {
> + if (!i)
> + adev->power.flags.ignore_parent = false;
> + dev_err(&adapter->dev,
> + "failed to add I2C device %s from ACPI\n",
> + dev_name(&adev->dev));
> + break;
> + }
> }
>
> return AE_OK;
> @@ -1168,6 +1210,45 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap)
> if (ACPI_FAILURE(status))
> dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
> }
> +
> +/* Helper functions to get companion addresses */
> +struct acpi_comp_arg {
> + struct acpi_device *acpi_dev;
> + void (*callback)(struct i2c_client *);
> +};
> +
> +static int i2c_acpi_companion(struct device *dev, void *_arg)
> +{
> + struct acpi_comp_arg *arg = _arg;
> +
> + if (arg->acpi_dev == ACPI_COMPANION(dev)) {
> + struct i2c_client *client;
> +
> + client = to_i2c_client(dev);
> + arg->callback(client);
> + }
> +
> + return 0;
> +}
> +

Missing kernel doc here.

> +int i2c_for_each_acpi_comp_client(struct i2c_client *client,
> + void (*callback)(struct i2c_client *))
> +{
> + struct acpi_comp_arg arg;
> + int found;
> +
> + if (!client)
> + return -EINVAL;
> +
> + arg.acpi_dev = ACPI_COMPANION(&client->dev);
> + arg.callback = callback;
> + found = device_for_each_child(&client->adapter->dev, &arg,
> + i2c_acpi_companion);
> +
> + return found;
> +}
> +EXPORT_SYMBOL_GPL(i2c_for_each_acpi_comp_client);

Since devices with multiple addresses seem to exist in real world, I
think it would be beneficial to add a bit more generic implementation of
the above to the I2C core instead. Then non-ACPI systems could also take
advantage of it.

> +
> #else
> static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
> #endif /* CONFIG_ACPI */
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index deddeb8..ce75c73 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -323,6 +323,19 @@ extern struct i2c_client *
> i2c_new_dummy(struct i2c_adapter *adap, u16 address);
>
> extern void i2c_unregister_device(struct i2c_client *);
> +
> +#if IS_ENABLED(CONFIG_ACPI)
> +/* Callback to get i2c_client instance for ACPI i2 resource */
> +int i2c_for_each_acpi_comp_client(struct i2c_client *client,
> + void (*callback)(struct i2c_client *));
> +#else
> +int i2c_for_each_acpi_comp_client(struct i2c_client *client,
> + int (*callback)(struct i2c_client *))
> +{
> + return 0;
> +}
> +#endif
> +
> #endif /* I2C */
>
> /* Mainboard arch_initcall() code should register all its I2C devices.
> --
> 1.7.11.7
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-06-10 11:41    [W:2.428 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site