lkml.org 
[lkml]   [2014]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/2] mtd: orion-nand: fix build error with ARMv4
On Fri, May 09, 2014 at 03:45:05PM -0300, Ezequiel Garcia wrote:

> I gave this a try in order to answer Arnd's performance
> question. First of all, the patch seems wrong. I guess it's because
> readsl reads 4-bytes pieces, instead of 8-bytes.
>
> This patch below is tested (but not completely, see below) and works:

Compilers are better now, I think you can just ditch the weirdness:

uint64_t *from;
uint64_t *to;
void foo()
{
for (unsigned int I = 0; I != 1000; I++)
*to++ = *from;
}

Using even gcc 4.6.3 gives good code:

(v6)
.L2:
ldrd r2, [ip]
strd r2, [r1], #8
cmp r1, r0

(v4)
.L2:
ldmia ip, {r0-r1}
stmia r3!, {r0-r1}
cmp r3, r2

For correctness this v4 version does require that the cpu executes the
ldmia reads in increasing address order, and never in any other
order. AFAIK the periphal is just a simple fifo that basically ignores
the address.

memcpy_fromio is not as good since it will never align if the buffer
is unaligned, while this version does.

The below gives:

c8: ea000002 b d8 <orion_nand_read_buf+0x84>
cc: e5dc0000 ldrb r0, [ip]
d0: e7c30001 strb r0, [r3, r1]
d4: e2811001 add r1, r1, #1
d8: e1510002 cmp r1, r2

Which looks the same as the asm version to me.

diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index dc9d07f34b8a..fea1597f623e 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -95,16 +95,13 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
}
buf64 = (uint64_t *)buf;
while (i < len/8) {
- /*
- * Since GCC has no proper constraint (PR 43518)
- * force x variable to r2/r3 registers as ldrd instruction
- * requires first register to be even.
- */
- register uint64_t x asm ("r2");
-
- asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
- buf64[i++] = x;
+#ifdef CONFIG_64BIT
+ buf64[i++] = readq_relaxed(io_base);
+#else
+ buf64[i++] = *(const volatile u64 __force *)io_base;
+#endif
}
+
i *= 8;
while (i < len)
buf[i++] = readb(io_base);

\
 
 \ /
  Last update: 2014-05-10 00:21    [W:1.620 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site