[lkml]   [2014]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] i2c: exynos5: Initialise Samsung High Speed I2C controller early
On Fri, May 09, 2014 at 08:12:47PM +0530, Naveen Krishna Ch wrote:
> On 9 May 2014 19:21, Mark Brown <> wrote:
> > On Fri, May 09, 2014 at 05:50:00PM +0530, Naveen Krishna Ch wrote:

> >> DRM related drivers like DP, FIMD, HDMI, Mixer wants to be probed ASAP
> >> during the boot.
> >> The real problem comes when, one of these drivers do a regulator_get().

> >> If the physical supply is not enabled/hookedup the regulator_get() call
> >> assumes that physical supply is present and returns a
> >> "dummy_regulator" (But, not an error).

> >> Because of which, Display and several other devices fails to work.

> > These drivers are buggy, if they geniunely expect and handle a missing
> > supply then they should be using regulator_get_optional() to request the
> > regulator and even if they don't the use of subsys_initcall() is not
> > going to fix anything here - if a dummy regulator is going to be
> > returned the time things are probed won't make a difference.


> If all the I2C, SPI, DMA, I2C_TUNNEL, DRM based LCD are all mod_probes()
> DRM drivers are probing a head of the PMIC probe. Which is causing the
> display drivers to get "dummy_regulators" instead of the real supplies.

No, it really won't - I have no idea what you are doing but it's not
mainline. If you are getting dummy regulators then you don't have a
supply present at all and probe ordering isn't going to make a blind
bit of difference.

Please provide a specific technical description of the problem you are
seeing in mainline.
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2014-05-09 18:21    [W:0.071 / U:1.000 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site