lkml.org 
[lkml]   [2014]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause"
The direct cause is IRQ_SPI is already defined as a macro in unicore32
architecture (also, blackfin and mips architectures define it). The
related error (unicore32 with allmodconfig)

CC [M] drivers/scsi/mvsas/mv_94xx.o
In file included from drivers/scsi/mvsas/mv_94xx.c:27:
drivers/scsi/mvsas/mv_94xx.h:176: error: expected identifier before numeric constant

And "enum pci_interrupt_cause" may will be useful for kernel drivers,
although at present, it is not used in kernel. So add 'MVS_' for it.


Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
---
drivers/scsi/mvsas/mv_94xx.h | 58 ++++++++++++++++++++++----------------------
1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 487aa6f..14e1974 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -150,35 +150,35 @@ enum chip_register_bits {

enum pci_interrupt_cause {
/* MAIN_IRQ_CAUSE (R10200) Bits*/
- IRQ_COM_IN_I2O_IOP0 = (1 << 0),
- IRQ_COM_IN_I2O_IOP1 = (1 << 1),
- IRQ_COM_IN_I2O_IOP2 = (1 << 2),
- IRQ_COM_IN_I2O_IOP3 = (1 << 3),
- IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
- IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
- IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
- IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
- IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
- IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
- IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
- IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
- IRQ_PCIF_DRBL0 = (1 << 12),
- IRQ_PCIF_DRBL1 = (1 << 13),
- IRQ_PCIF_DRBL2 = (1 << 14),
- IRQ_PCIF_DRBL3 = (1 << 15),
- IRQ_XOR_A = (1 << 16),
- IRQ_XOR_B = (1 << 17),
- IRQ_SAS_A = (1 << 18),
- IRQ_SAS_B = (1 << 19),
- IRQ_CPU_CNTRL = (1 << 20),
- IRQ_GPIO = (1 << 21),
- IRQ_UART = (1 << 22),
- IRQ_SPI = (1 << 23),
- IRQ_I2C = (1 << 24),
- IRQ_SGPIO = (1 << 25),
- IRQ_COM_ERR = (1 << 29),
- IRQ_I2O_ERR = (1 << 30),
- IRQ_PCIE_ERR = (1 << 31),
+ MVS_IRQ_COM_IN_I2O_IOP0 = (1 << 0),
+ MVS_IRQ_COM_IN_I2O_IOP1 = (1 << 1),
+ MVS_IRQ_COM_IN_I2O_IOP2 = (1 << 2),
+ MVS_IRQ_COM_IN_I2O_IOP3 = (1 << 3),
+ MVS_IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
+ MVS_IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
+ MVS_IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
+ MVS_IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
+ MVS_IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
+ MVS_IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
+ MVS_IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
+ MVS_IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
+ MVS_IRQ_PCIF_DRBL0 = (1 << 12),
+ MVS_IRQ_PCIF_DRBL1 = (1 << 13),
+ MVS_IRQ_PCIF_DRBL2 = (1 << 14),
+ MVS_IRQ_PCIF_DRBL3 = (1 << 15),
+ MVS_IRQ_XOR_A = (1 << 16),
+ MVS_IRQ_XOR_B = (1 << 17),
+ MVS_IRQ_SAS_A = (1 << 18),
+ MVS_IRQ_SAS_B = (1 << 19),
+ MVS_IRQ_CPU_CNTRL = (1 << 20),
+ MVS_IRQ_GPIO = (1 << 21),
+ MVS_IRQ_UART = (1 << 22),
+ MVS_IRQ_SPI = (1 << 23),
+ MVS_IRQ_I2C = (1 << 24),
+ MVS_IRQ_SGPIO = (1 << 25),
+ MVS_IRQ_COM_ERR = (1 << 29),
+ MVS_IRQ_I2O_ERR = (1 << 30),
+ MVS_IRQ_PCIE_ERR = (1 << 31),
};

union reg_phy_cfg {
--
1.9.2.459.g68773ac

\
 
 \ /
  Last update: 2014-05-09 02:21    [W:1.405 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site