lkml.org 
[lkml]   [2014]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] clk: exynos5420: Keep aclk66_peric enabled during boot
Hi,

On 30.05.2014 00:29, Mike Turquette wrote:
> Quoting Doug Anderson (2014-05-29 14:21:36)
>> Right now if you've got earlyprintk enabled on exynos5420-peach-pit
>> then you'll get a hang on boot. Here's why:
>>
>> 1. The i2c-s3c2410 driver will probe at subsys_initcall. It will
>> enable its clock and disable it. This is the clock "i2c2".
>> 2. The act of disabling "i2c2" will disable its parents. In this case
>> the parent is "aclk66_peric". There are no other children of
>> "aclk66_peric" officially enabled, so "aclk66_peric" will be turned
>> off (despite being CLK_IGNORE_UNUSED, but that's by design).
>> 3. The next time you try to earlyprintk you'll do so without the UART
>> clock enabled. That's because the UART clocks are also children of
>> "aclk66_peric". You'll hang.
>>
>> There's no good place to put a clock enable for earlyprintk, which is
>> handled by a bunch of assembly code. The best we can do is to handle
>> this in the clock driver.
>>
>> Signed-off-by: Doug Anderson <dianders@chromium.org>
>> ---
>> drivers/clk/samsung/clk-exynos5420.c | 24 ++++++++++++++++++++++++
>> 1 file changed, 24 insertions(+)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
>> index 9d7d7ee..1e586be 100644
>> --- a/drivers/clk/samsung/clk-exynos5420.c
>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>> @@ -1172,11 +1172,17 @@ static struct of_device_id ext_clk_match[] __initdata = {
>> { },
>> };
>>
>> +/* Keep these clocks on until late_initcall */
>> +static const char *boot_clocks[] __initconst = {
>> + "aclk66_peric",
>> +};
>> +
>> /* register exynos5420 clocks */
>> static void __init exynos5x_clk_init(struct device_node *np,
>> enum exynos5x_soc soc)
>> {
>> struct samsung_clk_provider *ctx;
>> + int i;
>>
>> if (np) {
>> reg_base = of_iomap(np, 0);
>> @@ -1226,6 +1232,12 @@ static void __init exynos5x_clk_init(struct device_node *np,
>> }
>>
>> exynos5420_clk_sleep_init();
>> +
>> + for (i = 0; i < ARRAY_SIZE(boot_clocks); i++) {
>> + struct clk *to_enable = __clk_lookup(boot_clocks[i]);
>
> How about replacing __clk_lookup with clk_get? You can keep the struct
> clk object hanging around for later...
>

Mike, correct me if I'm wrong, but I thought you need clkdev look-up
entry for clk_get() to find a clock. Here, this clock apparently don't
have one and you don't even have a struct device * to pass to clk_get(),
so even if you had a look-up entry, it would need to be a wildcard entry
(with NULL device), which wouldn't be too elegant.

Doug, isn't a similar thing needed for PM debug as well? Maybe having
this clock always ungated whenever DEBUG_LL is enabled would be enough?

Best regards,
Tomasz


\
 
 \ /
  Last update: 2014-05-30 07:41    [W:0.926 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site