Messages in this thread | | | Date | Fri, 30 May 2014 10:49:27 +0100 | From | Srinivas Kandagatla <> | Subject | Re: [PATCH v4 03/13] mmc: mmci: Add Qualcomm Id to amba id table |
| |
On 30/05/14 10:39, Ulf Hansson wrote: > On 28 May 2014 15:46, <srinivas.kandagatla@linaro.org> wrote: >> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> >> This patch adds a fake Qualcomm ID 0x00051180 to the amba_ids, as Qualcomm >> SDCC controller is pl180, but amba id registers read 0x0's. >> The plan is to remove SDCC driver totally and use mmci as the main SD >> controller driver for Qualcomm SOCs. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> >> --- >> drivers/mmc/host/mmci.c | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) >> >> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c >> index a38e714..86f25a9 100644 >> --- a/drivers/mmc/host/mmci.c >> +++ b/drivers/mmc/host/mmci.c >> @@ -160,6 +160,14 @@ static struct variant_data variant_ux500v2 = { >> .pwrreg_nopower = true, >> }; >> >> +static struct variant_data variant_qcom = { >> + .fifosize = 16 * 4, >> + .fifohalfsize = 8 * 4, >> + .clkreg = MCI_CLK_ENABLE, >> + .datalength_bits = 24, >> + .pwrreg_powerup = MCI_PWR_UP, >> +}; >> + >> static int mmci_card_busy(struct mmc_host *mmc) >> { >> struct mmci_host *host = mmc_priv(mmc); >> @@ -1750,6 +1758,12 @@ static struct amba_id mmci_ids[] = { >> .mask = 0xf0ffffff, >> .data = &variant_ux500v2, >> }, >> + /* Qualcomm variants */ >> + { >> + .id = 0x00051180, >> + .mask = 0x000fffff, >> + .data = &variant_qcom, >> + }, >> { 0, 0 }, >> }; > > Shouldn't this patch be moved to very end of this patchset? > > If we would apply this patch on it's own - the Qcom variant wouldn't > work, right? Yes, I would not work. I will move it to the end of the patchset.
Thanks, srini > > Kind regards > Ulf Hansson > >> >> -- >> 1.9.1 >>
| |