lkml.org 
[lkml]   [2014]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI: Introduce new device binding path using pci_dev.driver_override
On Tue, May 27, 2014 at 09:07:42PM -0600, Bjorn Helgaas wrote:
> On Tue, May 20, 2014 at 08:53:21AM -0600, Alex Williamson wrote:
> > The driver_override field allows us to specify the driver for a device
> > rather than relying on the driver to provide a positive match of the
> > device. This shortcuts the existing process of looking up the vendor
> > and device ID, adding them to the driver new_id, binding the device,
> > then removing the ID, but it also provides a couple advantages.
> >
> > First, the above existing process allows the driver to bind to any
> > device matching the new_id for the window where it's enabled. This is
> > often not desired, such as the case of trying to bind a single device
> > to a meta driver like pci-stub or vfio-pci. Using driver_override we
> > can do this deterministically using:
> >
> > echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override
> > echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
> > echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
> >
> > Previously we could not invoke drivers_probe after adding a device
> > to new_id for a driver as we get non-deterministic behavior whether
> > the driver we intend or the standard driver will claim the device.
> > Now it becomes a deterministic process, only the driver matching
> > driver_override will probe the device.
> >
> > To return the device to the standard driver, we simply clear the
> > driver_override and reprobe the device:
> >
> > echo > /sys/bus/pci/devices/0000:03:00.0/driver_override
> > echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
> > echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
> >
> > Another advantage to this approach is that we can specify a driver
> > override to force a specific binding or prevent any binding. For
> > instance when an IOMMU group is exposed to userspace through VFIO
> > we require that all devices within that group are owned by VFIO.
> > However, devices can be hot-added into an IOMMU group, in which case
> > we want to prevent the device from binding to any driver (override
> > driver = "none") or perhaps have it automatically bind to vfio-pci.
> > With driver_override it's a simple matter for this field to be set
> > internally when the device is first discovered to prevent driver
> > matches.
> >
> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> Greg, are you going to weigh in on this? It does seem to solve some real
> problems. ISTR you had an opinion once, but I don't know your current
> thoughts.

This looks good to me:

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


\
 
 \ /
  Last update: 2014-05-29 00:21    [W:1.979 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site