lkml.org 
[lkml]   [2014]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCHv5 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller
From
On Wed, May 28, 2014 at 2:01 AM, Steffen Trumtrar
<s.trumtrar@pengutronix.de> wrote:
> On Tue, May 27, 2014 at 03:57:47PM -0500, Alan Tull wrote:
>> On Tue, May 27, 2014 at 2:42 PM, Steffen Trumtrar
>> <s.trumtrar@pengutronix.de> wrote:
>> > On Tue, May 27, 2014 at 02:12:17PM -0500, Alan Tull wrote:
>> >> On Tue, May 27, 2014 at 2:11 AM, Steffen Trumtrar
>> >> <s.trumtrar@pengutronix.de> wrote:
>> >> > On Wed, May 21, 2014 at 10:38:34AM -0500, Thor Thayer wrote:
>> >> >> On Tue, May 20, 2014 at 9:44 AM, Steffen Trumtrar
>> >> >> <s.trumtrar@pengutronix.de> wrote:
>> >> >> > Hi!
>> >> >> >
>> >> >> > On Tue, May 20, 2014 at 09:31:06AM -0500, Alan Tull wrote:
>> >> >> >> On Mon, May 19, 2014 at 2:37 PM, Thor Thayer <tthayer.linux@gmail.com> wrote:
>> >> >> >>
>> >> >> >> >>> >> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
>> >> >> >> >>> >> new file mode 100644
>> >> >> >> >>> >> index 0000000..8f8746b
>> >> >> >> >>> >> --- /dev/null
>> >> >> >> >>> >> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
>> >> >> >> >>> >> @@ -0,0 +1,11 @@
>> >> >> >> >>> >> +Altera SOCFPGA SDRAM Controller
>> >> >> >> >>> >> +
>> >> >> >> >>> >> +Required properties:
>> >> >> >> >>> >> +- compatible : "altr,sdr-ctl";
>> >> >> >> >>> >> +- reg : Should contain 1 register ranges(address and length)
>> >> >> >> >>> >> +
>> >> >> >> >>> >> +Example:
>> >> >> >> >>> >> + sdrctl@ffc25000 {
>> >> >> >> >>> >> + compatible = "altr,sdr-ctl";
>> >> >> >> >>> >> + reg = <0xffc25000 0x1000>;
>> >> >> >> >>> >> + };
>> >> >> >> >>> >> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
>> >> >> >> >>> >> index df43702..6ce912e 100644
>> >> >> >> >>> >> --- a/arch/arm/boot/dts/socfpga.dtsi
>> >> >> >> >>> >> +++ b/arch/arm/boot/dts/socfpga.dtsi
>> >> >> >> >>> >> @@ -676,6 +676,11 @@
>> >> >> >> >>> >> clocks = <&l4_sp_clk>;
>> >> >> >> >>> >> };
>> >> >> >> >>> >>
>> >> >> >> >>> >> + sdrctl@ffc25000 {
>> >> >> >> >>> >> + compatible = "altr,sdr-ctl", "syscon";
>> >> >> >> >>> > ^^^^^^^^^^
>> >> >> >> >>> >
>> >> >> >> >>> > Get rid of that, too, please.
>> >> >> >> >>>
>> >> >> >> >>> Hi Steffan,
>> >> >> >> >>>
>> >> >> >> >>> I believe I need to keep the "syscon". The same register (ctrlcfg)
>> >> >> >> >>> that has the ECC enable bitfield also includes the DRAM configuration
>> >> >> >> >>> bitfields that other drivers will want to access (specifically the
>> >> >> >> >>> FPGA bridge needs this information). Since this register will be
>> >> >> >> >>> shared between drivers, syscon seems like the best solution.
>> >> >> >> >>>
>> >> >> >> >>
>> >> >> >> >> Hm, from looking at the documentation of the ctrlcfg I can't really
>> >> >> >> >> understand which bits you would need for the FPGA brigde and why.
>> >> >> >>
>> >> >> >> Hi Steffen,
>> >> >> >>
>> >> >> >> Offset 0x80 in the sdr-ctl is the "fpgaportrst" register. 14 bits
>> >> >> >> wide, defaults to 0. When appropriate bits set to 1 in that reg, it
>> >> >> >> allows an FPGA port to come out of reset (enables that port). Has no
>> >> >> >> other effect on SDRAM configuration.
>> >> >> >>
>> >> >> >> >> That all sounds like stuff you would want to set for the specific
>> >> >> >> >> RAM you are dealing with on a specific board.
>> >> >> >> >> What bridge are you talking about? The SDRAM bridge?
>> >> >> >>
>> >> >> >> Yes, the port allows the FPGA a direct path to the SDRAM. This one
>> >> >> >> register the only register in the sdr that the bridge driver needs.
>> >> >> >>
>> >> >> >
>> >> >> > So, what I suggested down ...
>> >> >> >
>> >> >> >> >>
>> >> >> >> >> I can see the problem with the ECC enable, though.
>> >> >> >> >>
>> >> >> >> >> Regards,
>> >> >> >> >> Steffen
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >>> > sdrctl@ffc25000 {
>> >> >> >> >>> > compatible = "altr,sdr-ctl";
>> >> >> >> >>> > reg = <0xffc25000 0x1000>;
>> >> >> >> >>> > ranges;
>> >> >> >> >>> >
>> >> >> >> >>> > edac@ffc2502c {
>> >> >> >> >>> > compatible = "altr,sdram-edac";
>> >> >> >> >>> > reg = <0xffc2502c 0x50>;
>> >> >> >> >>> > interrupts = <0 39 4>;
>> >> >> >> >>> > };
>> >> >> >> >>> > };
>> >> >> >> >>> >
>> >> >> >> >>> > Then we can later add:
>> >> >> >> >>> >
>> >> >> >> >>> > sdr-ports: ports@ffc2507c {
>> >> >> >> >>> > #reset-cells = <1>;
>> >> >> >> >>> > compatible = "altr,sdr-ports";
>> >> >> >> >>> > reg = <0xffc2507c 0x10>;
>> >> >> >> >>> > clocks = <&ddr_dqs_clk>;
>> >> >> >> >>> > ...
>> >> >> >> >>> > };
>> >> >> >>
>> >> >> >
>> >> >> > ... here should work. No?! Just a simple driver that registers with the
>> >> >> > reset-framework. I would add 0x7c to that driver and than that driver could
>> >> >> > "configure" the port and let it out of reset.
>> >> >> >
>> >> >> > I have done the same thing for the other 3 bridges, but am not finished yet.
>> >> >> > Especially the GPV-stuff needs to at least be able to be added later if not now.
>> >> >> >
>> >> >
>> >> > Hi Thor!
>> >> >
>> >> >> I'm not clear on how the EDAC driver will interact with the registers
>> >> >> allocated to the SDRAM controller. If the group of registers from
>> >> >> 0xffc25000 to 0xffc26000 is exclusively allocated to the SDRAM
>> >> >> controller, how does the EDAC driver cleanly access that single
>> >> >> register inside this range?
>> >> >>
>> >> >
>> >> > The compatible in the example is wrong. I didn't mean to map the whole address space
>> >> > to some driver.
>> >> > I think for the configuration register syscon is the right approach. It is a
>> >> > bag of bits that don't necessitate an own driver, so syscon is perfect.
>> >> >
>> >> > So, let me change my proposal to
>> >> >
>> >> > sdr-ctl: sdram@ffc25000 {
>> >> > compatible = "altr,sdr-ctl", "syscon";
>> >> > reg = <0xffc25000 0x1>;
>> >> > };
>> >> >
>> >> > edac: edac@ffc2502c {
>> >> > compatible = "altr,sdram-edac";
>> >> > reg = <0xffc2502c 0x50>;
>> >> > interrupts = <0 39 4>;
>> >> > config = <&sdr-ctl>;
>> >> > ...
>> >> > };
>> >> >
>> >> > sdr-ports: ports@ffc2507c {
>> >> > compatible = "altr,sdr-ports";
>> >> > reg = <0xffc2507c 0x10>;
>> >> > clocks = <&ddr_dqs_clk>;
>> >> > ...
>> >> > };
>> >> >
>> >> > Maybe we can just skip the outer node that combines all the others.
>> >> > So, if we do it like that, you can still use syscon, but only for the register
>> >> > that needs it. And the EDAC definitely needs access to the config register, so
>> >> > all is good.
>> >> >
>> >> >> Is the solution that I don't use request_region() (and therefore not
>> >> >> request exclusive access) when setting up the SDRAM controller?
>> >> >>
>> >> >> If you could point me to your drivers for the other bridges that you
>> >> >> reference, your code may answer my question.
>> >> >>
>> >> >
>> >> > The other bridges don't need access to any SDRAM controller registers and
>> >> > I haven't even started to implement the GPV-stuff with the lw2hps-bridge :-(
>> >> >
>> >> > Regards,
>> >> > Steffen
>> >> >
>> >> > --
>> >> > Pengutronix e.K. | |
>> >> > Industrial Linux Solutions | http://www.pengutronix.de/ |
>> >> > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> >> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>> >>
>> >> OK now I understand. For register offset 0x0, that's all stuff set up
>> >> in the bootloader. We won't be touching that register except for the
>> >> EDAC. So syscon isn't needed here.
>> >>
>> >> Each driver that uses some sdr registers can specify which registers
>> >> it uses in the device tree. So far we don't have any cases of two
>> >> drivers that share a register.
>> >>
>> >> The ECC driver will need two ranges: offset 0x00 and 0x38 through 0x50.
>> >> The fpga bridges just needs offset 0x80.
>> >>
>> >
>> > Well, almost ;-)
>> > Use syscon for 0x0 and reference that in the ECC driver, which only is
>> > responsible for 0x38 to 0x50. Then flip the two EDAC bits via the syscon-phandle.
>> > Then a bootloader can probe with the same dts and have a driver match on the
>> > config-register and one for all the DRAM setup (< 0x38), which we don't need in
>> > the kernel. On the other hand the EDAC seems unneccessary for the bootloader.
>> > And this all matches the partitioning of the SDR register space, so I think it
>> > is also a correct hardware description.
>> >
>> > Regards,
>> > Steffen
>> >
>> > --
>> > Pengutronix e.K. | |
>> > Industrial Linux Solutions | http://www.pengutronix.de/ |
>> > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>>
>> We could do that. But is syscon a concept the bootloader will know about?
>>
>
> Depends on the bootloader. I guess u-boot doesn't, but barebox does.

OK then we will want offset 0 to be 'syscon'.

> Alternative would be to have the bootloader know that it has to look for an
> ECC node when it instead is looking for DRAM timing/width/... setup.
> Sounds wrong to me.
>
>> Actually it is a bit messier than what I originally said:
>> ECC driver needs two ranges: offset 0x00 and 0x38 through 0x50.
>> Machine layer needs control of 0x10, 0x14, 0x54, and 0x58 for putting
>> SDRAM into self-refresh.
>
> I didn't get that. Does the ECC driver need access to this "machine layer"?

Nope. Now that I think about it this machine layer will only need
access to 0x54, 0x58 and nobody else will need them.

So I agree with your suggestion. I think that besides offset 0, these
registers will be not be shared between drivers.

Thanks!
Alan Tull

>
> Regards,
> Steffen
>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2014-05-28 17:01    [W:0.145 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site