lkml.org 
[lkml]   [2014]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/7] of: configure the platform device dma parameters
On Wednesday 28 May 2014 09:32 AM, Linus Walleij wrote:
> On Wed, May 28, 2014 at 3:29 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>> On Wednesday 28 May 2014 10:23:09 Linus Walleij wrote:
>
>>> model = "ARM Integrator/AP";
>>> compatible = "arm,integrator-ap";
>>> + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
>>>
>>> aliases {
>>> arm,timer-primary = &timer2;
>>>
>>
>> It looks like you accidentally copied the ranges from keystone, even
>> though that has a 64-bit root bus and you only have 32-bit.
>
> Nah it was no accident, just good old incompetence ;-)
>
>> I suspect what you want is
>>
>> dma-ranges = <0x80000000 0 0x80000000>;
>>
>> to translate dma_addr_t 0x80000000-0xffffffff to phys_addr_t 0x0-0x7fffffff
>> rather than phys_addr_t 0x800000000-0x87fffffff.
>
Interesting. Where does the ROM address space resides on integrator then considering
address 0 is used for DMA.

> Thanks, I'll fix up my patch.
>
Feel free to add my ack after the fixup if you need one.

regards,
Santosh



\
 
 \ /
  Last update: 2014-05-28 16:21    [W:0.232 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site