Messages in this thread Patch in this message | | | From | Chanwoo Choi <> | Subject | [PATCH 4/4] dt-bindings: extcon: Add support for SM5502 MUIC device | Date | Wed, 28 May 2014 18:39:36 +0900 |
| |
This patch add documentation for binding of SM5502 MUIC (Micro-USB Interface Controller) device which is using EXTCON subsystem. The SM5502 MUIC device can detect various external accessories when external accessories is attached or detached.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: devicetree@vger.kernel.org Cc: linux-doc@vger.kernel.org
--- .../devicetree/bindings/extcon/extcon-sm5502.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt new file mode 100644 index 0000000..4ecda22 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt @@ -0,0 +1,23 @@ + +* SM5502 MUIC (Micro-USB Interface Controller) device + +The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device +which can detect the state of external accessory when external accessory is +attached or detached and button is pressed or released. It is interfaced to +the host controller using an I2C interface. + +Required properties: +- compatible: Should be "siliconmitus,sm5502-muic" +- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25 +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from sm5502 are delivered to. +- interrupts: Interrupt specifiers for detection interrupt sources. + +Example: + + sm5502@25 { + compatible = "siliconmitus,sm5502-muic"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x25>; + }; -- 1.8.0
| |