lkml.org 
[lkml]   [2014]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] gpio: Add support for Intel SoC PMIC (Crystal Cove)
Date
Devices based on Intel SoC products such as Baytrail have a Power
Management IC. In the PMIC there are subsystems for voltage regulation,
A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called
Crystal Cove.

This patch adds support for the GPIO function in Crystal Cove.

v2:
- Use IRQ chip helper to provide irqdomain.
- Implement .remove and can now build as a module.
- Various fix for unreadable or ugly code pieces.
v3:
- More fix in irq_handler and probe.

Signed-off-by: Yang, Bin <bin.yang@intel.com>
Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com>
---
drivers/gpio/Kconfig | 13 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-crystalcove.c | 347 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 361 insertions(+)
create mode 100644 drivers/gpio/gpio-crystalcove.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a86c49a..fed08d9d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -440,6 +440,19 @@ config GPIO_ARIZONA
help
Support for GPIOs on Wolfson Arizona class devices.

+config GPIO_CRYSTAL_COVE
+ tristate "GPIO support for Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ select GPIOLIB_IRQCHIP
+ help
+ Support for GPIO pins on Crystal Cove PMIC.
+
+ Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+ inside.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-crystalcove.
+
config GPIO_LP3943
tristate "TI/National Semiconductor LP3943 GPIO expander"
depends on MFD_LP3943
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6309aff..e6cd935 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
+obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
new file mode 100644
index 0000000..ea6ae1d
--- /dev/null
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -0,0 +1,347 @@
+/*
+ * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver
+ *
+ * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <bin.yang@intel.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/sched.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+
+#define NUM_GPIO 16
+
+#define UPDATE_TYPE BIT(0)
+#define UPDATE_MASK BIT(1)
+
+#define GPIO0IRQ 0x0b
+#define GPIO1IRQ 0x0c
+#define MGPIO0IRQS0 0x19
+#define MGPIO1IRQS0 0x1a
+#define MGPIO0IRQSX 0x1b
+#define MGPIO1IRQSX 0x1c
+#define GPIO0P0CTLO 0x2b
+#define GPIO0P0CTLI 0x33
+#define GPIO1P0CTLO 0x3b
+#define GPIO1P0CTLI 0x43
+
+#define CTLI_INTCNT_NE (1 << 1)
+#define CTLI_INTCNT_PE (2 << 1)
+#define CTLI_INTCNT_BE (3 << 1)
+
+#define CTLO_DIR_OUT (1 << 5)
+
+#define CTLO_DRV_CMOS (0 << 4)
+#define CTLO_DRV_OD (1 << 4)
+
+#define CTLO_DRV_REN (1 << 3)
+
+#define CTLO_RVAL_2KDW (0)
+#define CTLO_RVAL_2KUP (1 << 1)
+#define CTLO_RVAL_50KDW (2 << 1)
+#define CTLO_RVAL_50KUP (3 << 1)
+
+#define CTLO_INPUT_DEF (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
+#define CTLO_OUTPUT_DEF (CTLO_DIR_OUT | CTLO_INPUT_DEF)
+
+#define GPIO_TO_CTL(gpio, dir) \
+ ((gpio < 8 ? GPIO0P0CTL ## dir : GPIO1P0CTL ## dir) + (gpio % 8))
+
+/**
+ * struct crystalcove_gpio - Crystal Cove GPIO controller
+ * @buslock: for bus lock/sync and unlock.
+ * @chip: the abstract gpio_chip structure.
+ * @update: pending IRQ setting update, to be written to the chip upon unlock.
+ * @trigger_type: the trigger type of the IRQ.
+ * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
+ */
+struct crystalcove_gpio {
+ struct mutex buslock; /* irq_bus_lock */
+ struct gpio_chip chip;
+ int update;
+ int trigger_type;
+ bool set_irq_mask;
+};
+
+static void crystalcove_update_irq_mask(int gpio, bool mask)
+{
+ u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
+ int offset = gpio % 8;
+
+ if (mask)
+ intel_soc_pmic_setb(mirqs0, BIT(offset));
+ else
+ intel_soc_pmic_clearb(mirqs0, BIT(offset));
+}
+
+static void crystalcove_update_irq_type(int gpio, int type)
+{
+ u8 ctli = GPIO_TO_CTL(gpio, I);
+
+ type &= IRQ_TYPE_EDGE_BOTH;
+ intel_soc_pmic_clearb(ctli, CTLI_INTCNT_BE);
+
+ if (type == IRQ_TYPE_EDGE_BOTH)
+ intel_soc_pmic_setb(ctli, CTLI_INTCNT_BE);
+ else if (type == IRQ_TYPE_EDGE_RISING)
+ intel_soc_pmic_setb(ctli, CTLI_INTCNT_PE);
+ else if (type & IRQ_TYPE_EDGE_FALLING)
+ intel_soc_pmic_setb(ctli, CTLI_INTCNT_NE);
+}
+
+static int crystalcove_gpio_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
+{
+ u8 ctlo = GPIO_TO_CTL(gpio, O);
+
+ intel_soc_pmic_writeb(ctlo, CTLO_INPUT_DEF);
+ return 0;
+}
+
+static int crystalcove_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ u8 ctlo = GPIO_TO_CTL(gpio, O);
+
+ intel_soc_pmic_writeb(ctlo, CTLO_OUTPUT_DEF | value);
+ return 0;
+}
+
+static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+ u8 ctli = GPIO_TO_CTL(gpio, I);
+
+ return intel_soc_pmic_readb(ctli) & 0x1;
+}
+
+static void crystalcove_gpio_set(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ u8 ctlo = GPIO_TO_CTL(gpio, O);
+
+ if (value)
+ intel_soc_pmic_setb(ctlo, 1);
+ else
+ intel_soc_pmic_clearb(ctlo, 1);
+}
+
+static int crystalcove_irq_type(struct irq_data *data, unsigned type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct crystalcove_gpio *cg =
+ container_of(gc, struct crystalcove_gpio, chip);
+
+ cg->trigger_type = type;
+ cg->update |= UPDATE_TYPE;
+
+ return 0;
+}
+
+static void crystalcove_bus_lock(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct crystalcove_gpio *cg =
+ container_of(gc, struct crystalcove_gpio, chip);
+
+ mutex_lock(&cg->buslock);
+}
+
+static void crystalcove_bus_sync_unlock(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct crystalcove_gpio *cg =
+ container_of(gc, struct crystalcove_gpio, chip);
+ int gpio = data->hwirq;
+
+ if (cg->update & UPDATE_TYPE)
+ crystalcove_update_irq_type(gpio, cg->trigger_type);
+ if (cg->update & UPDATE_MASK)
+ crystalcove_update_irq_mask(gpio, cg->set_irq_mask);
+ cg->update = 0;
+
+ mutex_unlock(&cg->buslock);
+}
+
+static void crystalcove_irq_unmask(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct crystalcove_gpio *cg =
+ container_of(gc, struct crystalcove_gpio, chip);
+
+ cg->set_irq_mask = false;
+ cg->update |= UPDATE_MASK;
+}
+
+static void crystalcove_irq_mask(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct crystalcove_gpio *cg =
+ container_of(gc, struct crystalcove_gpio, chip);
+
+ cg->set_irq_mask = true;
+ cg->update |= UPDATE_MASK;
+}
+
+static struct irq_chip crystalcove_irqchip = {
+ .name = "PMIC-GPIO",
+ .irq_mask = crystalcove_irq_mask,
+ .irq_unmask = crystalcove_irq_unmask,
+ .irq_set_type = crystalcove_irq_type,
+ .irq_bus_lock = crystalcove_bus_lock,
+ .irq_bus_sync_unlock = crystalcove_bus_sync_unlock,
+};
+
+static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
+{
+ struct crystalcove_gpio *cg = data;
+ int pending;
+ int gpio;
+ unsigned int virq;
+
+ pending = intel_soc_pmic_readb(GPIO0IRQ);
+ pending |= intel_soc_pmic_readb(GPIO1IRQ) << 8;
+ intel_soc_pmic_writeb(GPIO0IRQ, pending & 0xff);
+ intel_soc_pmic_writeb(GPIO1IRQ, (pending >> 8) & 0xff);
+
+ for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
+ if (pending & BIT(gpio)) {
+ virq = irq_find_mapping(cg->chip.irqdomain, gpio);
+ if (virq)
+ generic_handle_irq(virq);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void crystalcove_gpio_dbg_show(struct seq_file *s,
+ struct gpio_chip *chip)
+{
+ struct crystalcove_gpio *cg =
+ container_of(chip, struct crystalcove_gpio, chip);
+ int gpio, offset;
+ u8 ctlo, ctli, mirqs0, mirqsx, irq;
+
+ for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
+ ctlo = intel_soc_pmic_readb(GPIO_TO_CTL(gpio, O));
+ ctli = intel_soc_pmic_readb(GPIO_TO_CTL(gpio, I));
+ mirqs0 = intel_soc_pmic_readb(
+ gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0);
+ mirqsx = intel_soc_pmic_readb(
+ gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX);
+ irq = intel_soc_pmic_readb(
+ gpio < 8 ? GPIO0IRQ : GPIO1IRQ);
+
+ offset = gpio % 8;
+ seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
+ gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
+ ctli & 0x1 ? "hi" : "lo",
+ ctli & CTLI_INTCNT_NE ? "fall" : " ",
+ ctli & CTLI_INTCNT_PE ? "rise" : " ",
+ ctlo,
+ mirqs0 & BIT(offset) ? "s0 mask " : "s0 unmask",
+ mirqsx & BIT(offset) ? "sx mask " : "sx unmask",
+ irq & BIT(offset) ? "pending" : " ");
+ }
+}
+
+static int crystalcove_gpio_probe(struct platform_device *pdev)
+{
+ int irq = platform_get_irq(pdev, 0);
+ struct crystalcove_gpio *cg;
+ int retval;
+ struct device *dev = pdev->dev.parent;
+
+ cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL);
+ if (!cg) {
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ mutex_init(&cg->buslock);
+ cg->chip.label = KBUILD_MODNAME;
+ cg->chip.direction_input = crystalcove_gpio_direction_input;
+ cg->chip.direction_output = crystalcove_gpio_direction_output;
+ cg->chip.get = crystalcove_gpio_get;
+ cg->chip.set = crystalcove_gpio_set;
+ cg->chip.base = -1;
+ cg->chip.ngpio = NUM_GPIO;
+ cg->chip.can_sleep = true;
+ cg->chip.dev = dev;
+ cg->chip.dbg_show = crystalcove_gpio_dbg_show;
+
+ gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+
+ retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, cg);
+
+ if (retval) {
+ dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
+ goto out;
+ }
+
+ retval = gpiochip_add(&cg->chip);
+ if (retval) {
+ dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval);
+ goto out_free_irq;
+ }
+
+ platform_set_drvdata(pdev, cg);
+
+ return 0;
+
+out_free_irq:
+ free_irq(irq, cg);
+out:
+ return retval;
+}
+
+static int crystalcove_gpio_remove(struct platform_device *pdev)
+{
+ struct crystalcove_gpio *cg = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+ int err;
+
+ err = gpiochip_remove(&cg->chip);
+
+ if (irq >= 0)
+ free_irq(irq, cg);
+
+ return err;
+}
+
+static struct platform_driver crystalcove_gpio_driver = {
+ .probe = crystalcove_gpio_probe,
+ .remove = crystalcove_gpio_remove,
+ .driver = {
+ .name = "crystal_cove_gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(crystalcove_gpio_driver);
+
+MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>");
+MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
+MODULE_LICENSE("GPL v2");
--
1.8.3.2


\
 
 \ /
  Last update: 2014-05-22 08:01    [W:0.335 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site