lkml.org 
[lkml]   [2014]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/7] of: configure the platform device dma parameters
On Thu, Apr 24, 2014 at 11:30:04AM -0400, Santosh Shilimkar wrote:
> Retrieve DMA configuration from DT and setup platform device's DMA
> parameters. The DMA configuration in DT has to be specified using
> "dma-ranges" and "dma-coherent" properties if supported.
>
> We setup dma_pfn_offset using "dma-ranges" and dma_coherent_ops
> using "dma-coherent" device tree properties.
>
> The set_arch_dma_coherent_ops macro has to be defined by arch if
> it supports coherent dma_ops. Otherwise, set_arch_dma_coherent_ops() is
> declared as nop.
>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> drivers/of/platform.c | 48 ++++++++++++++++++++++++++++++++++++++++---
> include/linux/dma-mapping.h | 7 +++++++
> 2 files changed, 52 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index 48de98f..270c0b9 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -187,6 +187,50 @@ struct platform_device *of_device_alloc(struct device_node *np,
> EXPORT_SYMBOL(of_device_alloc);
>
> /**
> + * of_dma_configure - Setup DMA configuration
> + * @dev: Device to apply DMA configuration
> + *
> + * Try to get devices's DMA configuration from DT and update it
> + * accordingly.
> + *
> + * In case if platform code need to use own special DMA configuration,it
> + * can use Platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE event
> + * to fix up DMA configuration.
> + */
> +static void of_dma_configure(struct device *dev)
> +{
> + u64 dma_addr, paddr, size;
> + int ret;
> +
> + dev->coherent_dma_mask = DMA_BIT_MASK(32);
> + if (!dev->dma_mask)
> + dev->dma_mask = &dev->coherent_dma_mask;
> +
> + /*
> + * if dma-coherent property exist, call arch hook to setup
> + * dma coherent operations.
> + */
> + if (of_dma_is_coherent(dev->of_node)) {
> + set_arch_dma_coherent_ops(dev);
> + dev_dbg(dev, "device is dma coherent\n");
> + }
> +
> + /*
> + * if dma-ranges property doesn't exist - just return else
> + * setup the dma offset
> + */
> + ret = of_dma_get_range(dev->of_node, &dma_addr, &paddr, &size);
> + if ((ret == -ENODEV) || (ret < 0)) {
> + dev_dbg(dev, "no dma range information to setup\n");
> + return;
> + }
> +
> + /* DMA ranges found. Calculate and set dma_pfn_offset */
> + dev->dma_pfn_offset = PFN_DOWN(paddr - dma_addr);
> + dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", dev->dma_pfn_offset);

Is this effectively the same as an IOMMU that applies a constant offset
to the bus address? Could or should this be done by adding a simple IOMMU
driver instead of adding dma_pfn_offset to struct device?

If we had both dma-ranges (and we set dma_pfn_offset as you do here) and an
IOMMU, how would the combination work? If the IOMMU driver managed
dma_pfn_offset internally, it seems like we'd have two entities dealing
with it. If the IOMMU driver doesn't use dma_pfn_offset, it seems like
it would be exposing a weird intermediate address space that's not usable
by either CPU or device.


\
 
 \ /
  Last update: 2014-05-02 19:21    [W:0.212 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site