lkml.org 
[lkml]   [2014]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] HID: rmi: check for the existence of some optional queries before reading query 12
From
Hi Andrew,

On Thu, May 1, 2014 at 5:49 PM, Andrew Duggan <aduggan@synaptics.com> wrote:
> The rmi4 spec defines some optional query registers in F11 which appear before
> query 12. This patch checks for the existence of some of the lesser used queries to
> compute the location of query12 and all subsequent query registers.
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
> ---

This is quite important because the XPS 13 laptop shows currently a
touchpad of physical size in mm of 5149 x 1972... :)

Thanks Andrew for taking care of it.

> drivers/hid/hid-rmi.c | 33 +++++++++++++++++++++++++++++----
> 1 file changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
> index 90ae5eb..912e008 100644
> --- a/drivers/hid/hid-rmi.c
> +++ b/drivers/hid/hid-rmi.c
> @@ -546,9 +546,12 @@ static int rmi_populate_f11(struct hid_device *hdev)
> struct rmi_data *data = hid_get_drvdata(hdev);
> u8 buf[20];
> int ret;
> + bool has_query9;
> + bool has_query11;
> bool has_query12;
> bool has_physical_props;
> unsigned x_size, y_size;
> + u16 query12_offset;
>
> if (!data->f11.query_base_addr) {
> hid_err(hdev, "No 2D sensor found, giving up.\n");
> @@ -561,6 +564,8 @@ static int rmi_populate_f11(struct hid_device *hdev)
> hid_err(hdev, "can not get query 0: %d.\n", ret);
> return ret;
> }
> + has_query9 = !!(buf[0] & BIT(3));
> + has_query11 = !!(buf[0] & BIT(4));
> has_query12 = !!(buf[0] & BIT(5));
>
> /* query 1 to get the max number of fingers */
> @@ -582,11 +587,30 @@ static int rmi_populate_f11(struct hid_device *hdev)
> }
>
> /*
> - * query 12 to know if the physical properties are reported
> - * (query 12 is at offset 10 for HID devices)
> + * At least 8 queries are guaranteed to be present in F11
> + * +1 for query12.
> */
> + query12_offset = 9;
> +
> + if (has_query9)
> + ++query12_offset;
> +
> + /* query 8 to find out if query 10 exists */
> + ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf);
> + if (ret) {
> + hid_err(hdev, "can not read gesture information: %d.\n", ret);
> + return ret;
> + }
> + if (!!(buf[0] & BIT(2)))

For consistency, I would have prefered to have "if (has_query10)" here.

Other than that, the patch is reviewed-by: Benjamin Tissoires
<benjamin.tissoires@redhat.com>

Cheers,
Benjamin

> + ++query12_offset;
> +
> + if (has_query11)
> + ++query12_offset;
> +
> + /* query 12 to know if the physical properties are reported */
> if (has_query12) {
> - ret = rmi_read(hdev, data->f11.query_base_addr + 10, buf);
> + ret = rmi_read(hdev, data->f11.query_base_addr
> + + query12_offset, buf);
> if (ret) {
> hid_err(hdev, "can not get query 12: %d.\n", ret);
> return ret;
> @@ -595,7 +619,8 @@ static int rmi_populate_f11(struct hid_device *hdev)
>
> if (has_physical_props) {
> ret = rmi_read_block(hdev,
> - data->f11.query_base_addr + 11, buf, 4);
> + data->f11.query_base_addr
> + + query12_offset + 1, buf, 4);
> if (ret) {
> hid_err(hdev, "can not read query 15-18: %d.\n",
> ret);
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-05-02 17:01    [W:1.323 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site