lkml.org 
[lkml]   [2014]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC 3/4] clk: samsung: Add driver to control CLKOUT line on Exynos SoCs
Hi Tushar,

On 19.05.2014 09:16, Tushar Behera wrote:
> On 05/15/2014 11:02 PM, Tomasz Figa wrote:
>> This patch introduces a driver that handles configuration of CLKOUT pin
>> of Exynos SoCs that can be used to output certain clocks from inside of
>> the SoC to a dedicated output pin.
>>
>> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
>> ---
>
> Tested the series on Exynos5420-based peach-pit board for audio playback
> (with an internal patch to set CLK_FIN_PLL as the parent of clkout).
>
> Tested-by: Tushar Behera <tushar.behera@linaro.org>
>

Thank you for testing.

>> Example :
>> pmu_system_controller: system-controller@10040000 {
>> compatible = "samsung,exynos5250-pmu", "syscon";
>> reg = <0x10040000 0x5000>;
>> + #clock-cells = <0>;
>> + clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
>> + "clkout4", "clkout8", "clkout9";
>> + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
>> + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
>> + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
>> + <&clock CLK_XUSBXTI>;
>> };
>
> Adding an usage example in the documentation would be helpful.

Right, that's usually a good idea, I don't know why I haven't added one.
Thanks.

Best regards,
Tomasz


\
 
 \ /
  Last update: 2014-05-21 21:41    [W:0.093 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site