lkml.org 
[lkml]   [2014]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 5/5] pci: keystone: add pcie driver based on designware core driver
On 5/15/2014 2:20 PM, Arnd Bergmann wrote:
> On Thursday 15 May 2014 13:45:08 Murali Karicheri wrote:
>>>> +#ifdef CONFIG_PCI_KEYSTONE
>>>> +/*
>>>> + * The KeyStone PCIe controller has maximum read request size of 256 bytes.
>>>> + */
>>>> +static void quirk_limit_readrequest(struct pci_dev *dev)
>>>> +{
>>>> + int readrq = pcie_get_readrq(dev);
>>>> +
>>>> + if (readrq > 256)
>>>> + pcie_set_readrq(dev, 256);
>>>> +}
>>>> +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_readrequest);
>>>> +#endif /* CONFIG_PCI_KEYSTONE */
>>> This doesn't work: you can't just limit do this for all devices just based
>>> on PCI_KEYSTONE being enabled, you have to check if you are actually using
>>> this controller.
>>>
>>> Arnd
>> I assume, I need to check if PCI controller's vendor ID/ device ID
>> match with the keystone
>> PCI controller's ID and call pcie_set_readrq() for all of the slave
>> PCI devices and do this fixup.
>> Is this correct understanding? If you can point me to an example code
>> for this that will be
>> really helpful so that I can avoid re-inventing the wheel.
> I think it would be best to move the quirk into the keystone pci driver
> and compare compare the dev->driver pointer of the PCI controller device.
>
> Arnd
Arnd,

I will move this quirk to keystone pci driver. So in that case, I guess
your original comment
is not applicable as this quirk gets enabled only with PCI keystone
driver enabled. Right?

Murali


\
 
 \ /
  Last update: 2014-05-16 23:01    [W:0.288 / U:5.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site