lkml.org 
[lkml]   [2014]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] devicetree: Add generic IOMMU device tree bindings
Date
From: Thierry Reding <treding@nvidia.com>

This commit introduces a generic device tree binding for IOMMU devices.
Only a very minimal subset is described here, but it is enough to cover
the requirements of both the Exynos System MMU and Tegra SMMU as
discussed here:

https://lkml.org/lkml/2014/4/27/346

More advanced functionality such as the dma-ranges property can easily
be added in a backwards-compatible way. In the absence of a dma-ranges
property it should be safe to default to the whole address space.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Documentation/devicetree/bindings/iommu/iommu.txt | 109 ++++++++++++++++++++++
1 file changed, 109 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iommu/iommu.txt

diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt
new file mode 100644
index 000000000000..2d67b52b656e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/iommu.txt
@@ -0,0 +1,109 @@
+This document describes the generic device tree binding for IOMMUs and their
+master(s).
+
+
+IOMMU device node:
+==================
+
+An IOMMU can provide the following services:
+
+* Remap address space to allow devices to access physical memory ranges that
+ they otherwise wouldn't be capable of accessing.
+
+ Example: 32-bit DMA to 64-bit physical addresses
+
+* Implement scatter-gather at page level granularity so that the device does
+ not have to.
+
+* Provide system protection against "rogue" DMA by forcing all accesses to go
+ through the IOMMU and faulting when encountering accesses to unmapped
+ address regions.
+
+* Provide address space isolation between multiple contexts.
+
+ Example: Virtualization
+
+Device nodes compatible with this binding represent hardware with some of the
+above capabilities.
+
+IOMMUs can be single-master or multiple-master. Single-master IOMMU devices
+typically have a fixed association to the master device, whereas multiple-
+master IOMMU devices can translate accesses from more than one master.
+
+Required properties:
+--------------------
+- #iommu-cells: The number of cells in an IOMMU specifier. The meaning of the
+ cells is defined by the binding for the IOMMU device.
+
+ Typical values include:
+ * 0: Single-master IOMMU devices are often not configurable, therefore the
+ specifying doesn't need to encode any information and can be empty.
+
+ * 1: Multiple-master IOMMU devices need to know for which master they should
+ enable translation. Typically the single cell in the specifier corresponds
+ to the master device's ID.
+
+
+IOMMU master node:
+==================
+
+Devices that access memory through an IOMMU are called masters. A device can
+have multiple master interfaces (to one or more IOMMU devices).
+
+Required properties:
+--------------------
+- iommus: A list of phandle and IOMMU specifier pairs that describe the IOMMU
+ master interfaces of the device. One entry in the list describes one master
+ interface of the device.
+
+Optional properties:
+--------------------
+- iommu-names: A list of names identifying each entry in the iommus property.
+
+
+Examples:
+=========
+
+Single-master IOMMU:
+--------------------
+
+ iommu {
+ #iommu-cells = <0>;
+ };
+
+ master {
+ iommu = <&/iommu>;
+ };
+
+Multi-master IOMMU:
+-------------------
+
+ iommu {
+ /* the specifier represents the ID of the master */
+ #iommu-cells = <1>;
+ };
+
+ master {
+ /* device has master ID 42 in the IOMMU */
+ iommu = <&/iommu 42>;
+ };
+
+Multi-master device:
+--------------------
+
+ /* single-master IOMMU */
+ iommu@1 {
+ #iommu-cells = <0>;
+ };
+
+ /* multi-master IOMMU */
+ iommu@2 {
+ /* the specifier represents the ID of the master */
+ #iommu-cells = <1>;
+ };
+
+ /* device with two master interfaces */
+ master {
+ iommus = <&/iommu@1>, /* master of the single-master IOMMU */
+ <&/iommu@2 42>; /* ID 42 in multi-master IOMMU */
+ };
--
1.9.2


\
 
 \ /
  Last update: 2014-05-16 16:41    [W:0.284 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site