lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/25] Change time_t and clock_t to 64 bit
On 2014/5/15 07:08 PM, Arnd Bergmann wrote:
> On Wednesday 14 May 2014 14:33:18 John Stultz wrote:
>> On Tue, May 13, 2014 at 12:32 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>>> On Tuesday 13 May 2014 20:24:59 Geert Uytterhoeven wrote:
>>>> On Tue, May 13, 2014 at 8:10 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>>>>> Using 64-bit time_t on x32 is fine, because it's fast to operate
>>>>> in user space with 64-bit registers, and the kernel is 64-bit
>>>>> anyway. Inside of the kernel, we may get into trouble using
>>>>> a 64-bit time_t on 32-bit architectures because of the overhead
>>>>> in 64-bit math, e.g. all the timekeeping code that is based on
>>>>> timespec or some code paths in file systems and network code where
>>>>> we actually require division of time_t values.
>>>>
>>>> While going over time_t uses, have you found a pattern for use cases
>>>> involving division of time_t values in filesystem and networking code?
>>>
>>> In ipv4, we have multiple places doing this:
>>>
>>> icmp_param.data.times[1] = htonl((tv.tv_sec % 86400) * MSEC_PER_SEC +
>>> tv.tv_nsec / NSEC_PER_MSEC);
>>>
>>> to calculate the miliseconds since midnight. For file systems, I
>>> found that FAT uses seconds/minutes/hours/days/month/year representation,
>>> which is a lot of divides, but that can probably be optimized and
>>> we need to handle years beyond 2038 anyway.
>>
>> We can do some tricks for internal optimizations here if these are
>> critical. I'd be more concerned about userland divisions where moving
>> to a 64bit time_t would cause performance issues that we cannot help
>> optimize.
>
> Good point.
>
>>>>> We clearly have to change that code in some for to deal with y2038,
>>>>> but 64-bit time_t may not be the best option. A lot of the
>>>>> in-kernel code can probably use ktime_t, which we can change
>>>>> to a different representation (e.g. 34 bit seconds) if needed,
>>>>> and all the code that is only interested in relative time
>>>>> (e.g. nanosleep) doesn't have to change at all.
>>>>
>>>> Yeah. 32-bit uptimes should be good enough for everyone (don't quote
>>>> me on that), so adding a 64-bit offset when there's a need for absolute
>>>> time should be OK.
>>>
>>> I think we have three categories:
>>>
>>> a) interfaces that uses relative time_t/timespec/timeval:
>>> - nanosleep
>>> - select/pselect/poll/ppoll/epoll
>>> - getrusage
>>> - sched_rr_get_interval
>>> - sigtimedwait
>>> - clock_nanosleep
>>> - alarm
>>> - siginfo (rusage)
>>>
>>> These can stay compatible, but we'd have to use a different
>>> type if we change time_t.
>>
>>
>> So as a correction, at least clock_nanosleep can specify sleep times
>> using absolute time.
>
> Thanks.
>
>>> b) interfaces that don't make sense for times in the past:
>>> - getitimer/setitimer
>>> - timer_settime/timer_gettime
>>> - gettimeofday/settimeofday
>>> - adjtimex
>>> - clock_gettime/clock_settime/clock_adjtime
>>> - time/stime
>>> - socket time stamps
>>> - audio time stamps
>>> - v4l time stamps
>>> - input event time stamps
>>> - sysv ipc (msg, sem, shm)
>>>
>>> Here, we are relatively free to change the start of the
>>> epoch in the kernel but convert to something else on the
>>> user space boundary. One possibility is to scale them to
>>> boot time and use ktime_t in the kernel.
>>
>> I'm not sure I'm totally following this... Are you suggesting we keep
>> 32bit time internally w/ some different offset but then pass to
>> userland a 64bit time_t? Or are you suggesting we change the abi to
>> move the epoch?
>
> What I meant is that regardless of what we decide for the ABI,
> we can change the in-kernel representation in any way we like as
> long as we can represent all dates that can occur during the runtime
> of the kernel, i.e. we don't have to represent times between 1970 and
> 2014. This could mean one of many representations:
>
> - time_t scaled forward by 44 years and/or made unsigned
> - ktime_t scaled to boot time
> - 64-bit nanoseconds starting at the epoch
> - timespec64
>
>> I think I'm with hpa in his recent mail in that the internal
>> representation is an optimization detail, and the bigger question is
>> do we use a 64bit time_t for future systems (possibly w/ a major ABI
>> break - with compat interface for existing 32bit applications), or do
>> we try to rev interfaces function by function to provide 2038 safe
>> versions which applications will have to be modified to use?
>>
>> Me, I'm a fan of moving time_t to 64bits, since it makes "porting"
>> applications to a 2038 safe ABI easier.
>
> I think there are two or three distinct problems:
>
> a) We absolutely have to find a way to build a user space that
> can survive 2038. This probably involves moving at least
> time_t, timeval and timespec to use 64-bit representation.
> b) We have to keep compatibility with existing user space running
> on future kernels, which means at least x86, arm and a few
> other 32-bit architectures (we can ignore some of the obsolete
> ones if that helps us) need to provide syscall ABIs for both
> 32-bit time_t and whatever we use for the new syscalls and
> ioctls. As Thomas said, for some interfaces this could mean
> 64-bit nanoseconds and for others it could be timespec64.
> c) glibc may or may not provide a way for applications to use
> the extended interfaces without a user space ABI break. My
> impression so far is that this is going to be too hard and
> it won't be done, but this is for the glibc developers to
> determine.

glibc does version its exported symbols, so provided new/old syscalls
are both provided, haveing a new version of a routine (using 64-bit
time_t and new syscall interfaces) and the old compat routine co-exist
should be possible. Of course, old binaries may still not be saved when
2038 arrives.

(Adding Joseph to the CC, for more definitive comments)

Thanks,
Chung-Lin


> The important distinction here is between user space time_t
> (timeval, timespec) and __kernel_time_t. We probably need
> to make the user space time_t a build-time conditional,
> at least for the foreseeable future. New architectures or
> new C libraries can start out using 64-bit time_t unconditionally.
>
> For the kernel interface, I think we should deprecate any interfaces
> using plain time_t and timeval, i.e. keep them around for existing
> architectures (possibly with a kernel compile time option to disable
> them so we are sure they don't leak out to new user space) and
> provide kernel interfaces based on 64-bit timespec (or other
> appropriate data structures for timestamps) for new architectures.
>
> I see multiple ways of doing this, and I don't like any of them ;-)
>
> 1) rename all *time* types to *old_time*, and provide new ones
> based on 64-bit time_t. We'd have to change them all at once,
> and there would likely still be some build breakage with glibc.
> The idea is that a libc built against old headers still works
> fine on old and new kernels, and a libc built against new kernels
> would automatically get 64-bit time but stop working on old
> kernels. Also, any binaries built against old glibc wouldn't
> work on new glibc, which is probably a killer.
>
> Example:
>
> -typedef long __kernel_time_t;
> +typedef long __kernel_oldtime_t;
> +typedef __s64 __kernel_time_t;
> -struct timespec { __kernel_oldtime_t tv_sec; long tv_nsec; };
> +struct oldtimespec { __kernel_oldtime_t tv_sec; long tv_nsec; };
> +struct timespec { __s64 tv_sec; __s64 tv_nsec; };
>
> -long sys_utime(char __user *filename, struct utimbuf __user *times);
> -long sys_utimes(char __user *filename, struct timeval __user *utimes);
> -long sys_futimesat(int dfd, const char __user *filename, struct timeval __user *utimes);
> -long sys_utimensat(int dfd, const char __user *filename, struct timespec __user *utimes, int flags);
> +long sys_oldutime(char __user *filename, struct oldutimbuf __user *times);
> +long sys_oldutimes(char __user *filename, struct oldtimeval __user *utimes);
> +long sys_oldfutimesat(int dfd, const char __user *filename, struct oldtimeval __user *utimes);
> +long sys_oldutimensat(int dfd, const char __user *filename, struct oldtimespec __user *utimes, int flags);
>
> +long sys_utimensat(int dfd, const char __user *filename, struct timespec __user *utimes, int flags);
>
> -#define __NR_utimensat 88
> -#define __NR_utimes 1037
> -#define __NR_futimesat 1066
> -#define __NR_utime 1063
> +#define __NR_oldutimensat 88
> +#define __NR_oldutimes 1037
> +#define __NR_oldfutimesat 1066
> +#define __NR_oldutime 1063
>
> +#define __NR_utimensat 277 /* next free number for asm-generic/unistd.h */
>
> 2) leave the kernel time_t as 'long' and only introduce a new
> struct timespec64,defined to be compatible with struct timespec on
> 64-bit architectures. For each syscall or ioctl that we need, come up
> with a new one. Make the libc define its own time_t as 64-bit and use
> the new syscalls instead of the old ones. This will allow a smooth
> transition, but we might not be done with it before 2038.
>
> Example:
>
> typedef long __kernel_time_t;
> struct timespec { __kernel_time_t tv_sec; long tv_nsec; };
> +struct timespec64 { __s64 tv_sec; __s64 tv_nsec; };
>
> +#ifdef __ARCH_WANT_32BIT_TIME
> long sys_utime(char __user *filename, struct utimbuf __user *times);
> long sys_utimes(char __user *filename, struct timeval __user *utimes);
> long sys_futimesat(int dfd, const char __user *filename, struct timeval __user *utimes);
> long sys_utimensat(int dfd, const char __user *filename, struct timespec __user *utimes, int flags);
> +#endif
> +long sys_futimens64at(int dfd, const char __user *filename, struct timespec64 __user *utimes, int flags);
>
>
> +#ifdef __ARCH_WANT_32BIT_TIME
> #define __NR_utimensat 88
> #define __NR_utimes 1037
> #define __NR_futimesat 1066
> #define __NR_utime 1063
> +#endif
>
> +#define __NR_futimens64at 277 /* next free number for asm-generic/unistd.h */
>
> 3) Make time_t 64-bit for new 32-bit architectures right away, and worry
> about existing architectures separately. This will mean avoiding intentional
> ABI changes for the new architectures later, at the cost of having fringe
> architecture use an ABI that nobody else uses, likely more broken.
>
> Example (as in the patch series under review):
>
> #ifndef __kernel_time_t
> #typedef __s64 __kernel_time_t
> #endif
>
> 4) Allow combinations of the above approaches using #ifdef in the uabi
> headers to let the libc decide at compile time which of the first two
> it wants. At the binary level they are compatible. This is most flexible
> but means we have to worry more about getting the corner cases right,
> with code that is even harder to maintain.
>
> Example:
>
> #ifdef __libc_want_64bit_time
> typedef long __kernel_oldtime_t;
> typedef __s64 __kernel_time_t;
> #else
> typedef long __kernel_time_t;
> typedef __s64 __kernel_time64_t;
> #endif
>
> #ifdef __libc_want_64bit_time
> #define __NR_oldutimensat 88
> #define __NR_futimensat 277
> #else
> #define __NR_utimensat 88
> #define __NR_futimens64at 277
> #endif
>
> Arnd
>



\
 
 \ /
  Last update: 2014-05-15 20:01    [W:0.196 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site