lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCHv2 1/2] mm/vmalloc: Add IO mapping space reused interface support.
From
On Thu, May 15, 2014 at 6:56 AM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Wed, 14 May 2014 16:18:51 +0800 Richard Lee <superlibj8301@gmail.com> wrote:
>
>> For the IO mapping, the same physical address space maybe
>> mapped more than one time, for example, in some SoCs:
>> - 0x20001000 ~ 0x20001400 --> 1KB for Dev1
>> - 0x20001400 ~ 0x20001800 --> 1KB for Dev2
>> and the page size is 4KB.
>>
>> Then both Dev1 and Dev2 will do ioremap operations, and the IO
>> vmalloc area's virtual address will be aligned down to 4KB, and
>> the size will be aligned up to 4KB. That's to say, only one
>> 4KB size's vmalloc area could contain Dev1 and Dev2 IO mapping area
>> at the same time.
>
> Unclear. What happens when a caller does the two ioremaps at present?
> It fails? Returns the current mapping's address? Something else?
>

For this case, should the later one wait ?
Maybe this patch hasn't consider about this.


>> For this case, we can ioremap only one time, and the later ioremap
>> operation will just return the exist vmalloc area.
>
> I guess an alternative is to establish a new vmap pointing at the same
> physical address. How does this approach compare to refcounting the
> existing vmap?
>

Yes, I'm also thinking to estabish one new vmap.


>> --- a/include/linux/vmalloc.h
>> +++ b/include/linux/vmalloc.h
>> @@ -1,6 +1,7 @@
>> #ifndef _LINUX_VMALLOC_H
>> #define _LINUX_VMALLOC_H
>>
>> +#include <linux/atomic.h>
>> #include <linux/spinlock.h>
>> #include <linux/init.h>
>> #include <linux/list.h>
>> @@ -34,6 +35,7 @@ struct vm_struct {
>> struct page **pages;
>> unsigned int nr_pages;
>> phys_addr_t phys_addr;
>> + atomic_t used;
>> const void *caller;
>> };
>>
>> @@ -100,6 +102,9 @@ static inline size_t get_vm_area_size(const struct vm_struct *area)
>> return area->size - PAGE_SIZE;
>> }
>>
>> +extern struct vm_struct *find_vm_area_paddr(phys_addr_t paddr, size_t size,
>> + unsigned long *offset,
>> + unsigned long flags);
>> extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
>> extern struct vm_struct *get_vm_area_caller(unsigned long size,
>> unsigned long flags, const void *caller);
>> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
>> index bf233b2..cf0093c 100644
>> --- a/mm/vmalloc.c
>> +++ b/mm/vmalloc.c
>> @@ -1293,6 +1293,7 @@ static void setup_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
>> vm->addr = (void *)va->va_start;
>> vm->size = va->va_end - va->va_start;
>> vm->caller = caller;
>> + atomic_set(&vm->used, 1);
>> va->vm = vm;
>> va->flags |= VM_VM_AREA;
>> spin_unlock(&vmap_area_lock);
>> @@ -1383,6 +1384,84 @@ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
>> NUMA_NO_NODE, GFP_KERNEL, caller);
>> }
>>
>> +static int vm_area_used_inc(struct vm_struct *area)
>> +{
>> + if (!(area->flags & VM_IOREMAP))
>> + return -EINVAL;
>
> afaict this can never happen?
>

Yes, it is for now.

>> + atomic_add(1, &area->used);
>> +
>> + return atomic_read(&va->vm->used);
>
> atomic_add_return() is neater. But the return value is in fact never
> used so it could return void.
>

yes, that' fine.

>> +}
>> +
>> +static int vm_area_used_dec(const void *addr)
>> +{
>> + struct vmap_area *va;
>> +
>> + va = find_vmap_area((unsigned long)addr);
>> + if (!va || !(va->flags & VM_VM_AREA))
>> + return 0;
>> +
>> + if (!(va->vm->flags & VM_IOREMAP))
>> + return 0;
>> +
>> + atomic_sub(1, &va->vm->used);
>> +
>> + return atomic_read(&va->vm->used);
>
> atomic_sub_return()
>

yes,

>> +}
>> +
>> +/**
>> + * find_vm_area_paddr - find a continuous kernel virtual area using the
>> + * physical addreess.
>> + * @paddr: base physical address
>> + * @size: size of the physical area range
>> + * @offset: the start offset of the vm area
>> + * @flags: %VM_IOREMAP for I/O mappings
>> + *
>> + * Search for the kernel VM area, whoes physical address starting at
>> + * @paddr, and if the exsit VM area's size is large enough, then return
>> + * it with increasing the 'used' counter, or return NULL.
>> + */
>> +struct vm_struct *find_vm_area_paddr(phys_addr_t paddr, size_t size,
>> + unsigned long *offset,
>> + unsigned long flags)
>> +{
>> + struct vmap_area *va;
>> + int off;
>> +
>> + if (!(flags & VM_IOREMAP))
>> + return NULL;
>> +
>> + size = PAGE_ALIGN((paddr & ~PAGE_MASK) + size);
>> +
>> + rcu_read_lock();
>> + list_for_each_entry_rcu(va, &vmap_area_list, list) {
>> + phys_addr_t phys_addr;
>> +
>> + if (!va || !(va->flags & VM_VM_AREA) || !va->vm)
>> + continue;
>> +
>> + if (!(va->vm->flags & VM_IOREMAP))
>> + continue;
>> +
>> + phys_addr = va->vm->phys_addr;
>> +
>> + off = (paddr & PAGE_MASK) - (phys_addr & PAGE_MASK);
>> + if (off < 0)
>> + continue;
>> +
>> + if (off + size <= va->vm->size - PAGE_SIZE) {
>> + *offset = off + (paddr & ~PAGE_MASK);
>> + vm_area_used_inc(va->vm);
>> + rcu_read_unlock();
>> + return va->vm;
>> + }
>> + }
>> + rcu_read_unlock();
>> +
>> + return NULL;
>> +}
>> +
>> /**
>> * find_vm_area - find a continuous kernel virtual area
>> * @addr: base address
>> @@ -1443,6 +1522,9 @@ static void __vunmap(const void *addr, int deallocate_pages)
>> addr))
>> return;
>>
>> + if (vm_area_used_dec(addr))
>> + return;
>
> This could do with a comment explaining why we return - ie, document
> the overall concept/design.
>
> Also, what prevents races here? Some other thread comes in and grabs a
> new reference just after this thread has decided to nuke the vmap?
>
> If there's locking here which I failed to notice then some code
> commentary which explains the locking rules would also be nice.
>

I will try to revise this.

Actually, I'm thinking about adding a new rb tree for the ioremap vmalloc
area sorted by physical address ? Then this will be more efficient for
searching.



Thanks very much for you comments.

BRs
Richard Lee



>> area = remove_vm_area(addr);
>> if (unlikely(!area)) {
>> WARN(1, KERN_ERR "Trying to vfree() nonexistent vm area (%p)\n",
>


\
 
 \ /
  Last update: 2014-05-15 10:41    [W:0.492 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site