Messages in this thread | | | Date | Tue, 13 May 2014 15:30:36 +0200 | From | Daniel Mack <> | Subject | Re: [PATCH v3 0/5] Add support for SW babble Control |
| |
On 05/13/2014 03:24 PM, George Cherian wrote: > Basically, there are 2 types of babble conditions. > 1) Transient babble condition - which could be recovered from without an > IP reset . > 2) Babble condition - which could be recovered from only by doing an IP > reset.
Ok, thanks for the explanation.
> Looks like you are always hitting case 2 (Most times am also hitting the > same).
Seems like, yes.
> There is no 100% reliable method to force it to happen. Following is > my setup , > I have a HUB with 4 devices connected , which gives me a Babble interrupt > on both connects and disconnects ( Not always though).
I also get them at disconnects, but only with one specific USB device.
But as I don't ever see case 1) above, I can't say if your approach works. What I can say, though, is that your patches don't break the recovery from babble conditions that I experienced :)
Daniel
| |