lkml.org 
[lkml]   [2014]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: tegra: add device tree for SHIELD
On 05/12/2014 02:26 AM, Alexandre Courbot wrote:
> NVIDIA SHIELD is a portable Android console embedded a Tegra 4 SoC with
> 2GB RAM and a 720p panel.
>
> The following hardware is enabled by this device tree: UART, eMMC, USB
> (needs external power), PMIC, backlight, joystick, SD card, GPIO keys.
>
> DSI panel, HDMI output, charger, self-powered USB, audio, wifi bluetooth
> are not supported yet but might be by future patches (likely in that
> order).
>
> Touch panel and sensors will probably never be supported.
>
> Initrd addresses are hardcoded to match the static values used by the
> bootloader, since it won't add them for us. All the same, a kernel
> command-line is provided to replace the one passed by the
> bootloader which is filled with garbage.
>
> NVIDIA SHIELD is typically booted with an appended DTB to avoid
> modifications made by the bootloader.

I've applied this one patch to Tegra's for-3.16/dt branch.


\
 
 \ /
  Last update: 2014-05-12 19:21    [W:0.084 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site