Messages in this thread Patch in this message | | | From | Laurent Pinchart <> | Subject | Re: [PATCH v2] ARM: pxa: Move iotable mapping inside vmalloc region | Date | Wed, 09 Apr 2014 18:26:51 +0200 |
| |
Hi Ezequiel,
On Thursday 28 November 2013 21:00:43 Ezequiel Garcia wrote: > In order to remove the following ugly message: > > BUG: mapping for 0x00000000 at 0xff000000 out of vmalloc space > > the iotable mappings should be re-located inside the vmalloc > region. Such move was introduced at commit: > > commit 0536bdf33faff4d940ac094c77998cfac368cfff > Author: Nicolas Pitre <nicolas.pitre@linaro.org> > Date: Thu Aug 25 00:35:59 2011 -0400 > > ARM: move iotable mappings within the vmalloc region > > While at it, condition the mapping to PXA25x and PXA27x, which > are the only platforms where it's used. > > Cc: Nicolas Pitre <nicolas.pitre@linaro.org> > Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> > Cc: David Heidelberger <david.heidelberger@ixit.cz> > Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> > --- > David, > > Is it possible for you to give this a try on your board?
I'm running into the same issue on a PXA270 system.
UNCACHED_PHYS_0 is used as an immediate operand to a mov instruction, and thus needs to be encoded as a shifted 8-bit value. One simple solution would be to hardcode it to 0xfd000000 (0xfe000000 is already used for the IMEMC mapping).
Another solution would be to keep the UNCACHED_PHYS_0 mapping at the end of the vmalloc area (with a fix for the UL problem due to VMALLOC_END) and modify pxa2[57]x_finish_suspend and pm_enter_standby_start to use an ldr instruction instead of a move instruction to load the address.
As a side note, the IMEMC mapping seems unused, maybe we could thus reclaim it and use 0xfe000000 for UNCACHED_PHYS_0.
Do you plan to submit a v3 of this patch ?
> arch/arm/mach-pxa/generic.c | 6 ++++-- > arch/arm/mach-pxa/include/mach/hardware.h | 5 +++-- > 2 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c > index 4225417..3c1b4fa 100644 > --- a/arch/arm/mach-pxa/generic.c > +++ b/arch/arm/mach-pxa/generic.c > @@ -83,11 +83,13 @@ static struct map_desc common_io_desc[] __initdata = { > .pfn = __phys_to_pfn(0x40000000), > .length = 0x02000000, > .type = MT_DEVICE > +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) > }, { /* UNCACHED_PHYS_0 */ > - .virtual = 0xff000000, > + .virtual = UNCACHED_PHYS_0, > .pfn = __phys_to_pfn(0x00000000), > - .length = 0x00100000, > + .length = UNCACHED_SIZE, > .type = MT_DEVICE > +#endif > } > }; > > diff --git a/arch/arm/mach-pxa/include/mach/hardware.h > b/arch/arm/mach-pxa/include/mach/hardware.h index ccb06e4..b365a72 100644 > --- a/arch/arm/mach-pxa/include/mach/hardware.h > +++ b/arch/arm/mach-pxa/include/mach/hardware.h > @@ -14,13 +14,14 @@ > #define __ASM_ARCH_HARDWARE_H > > #include <mach/addr-map.h> > +#include <asm/pgtable.h> > > /* > * Workarounds for at least 2 errata so far require this. > * The mapping is set in mach-pxa/generic.c. > */ > -#define UNCACHED_PHYS_0 0xff000000 > -#define UNCACHED_ADDR UNCACHED_PHYS_0 > +#define UNCACHED_PHYS_0 (VMALLOC_END - UNCACHED_SIZE) > +#define UNCACHED_SIZE SZ_1M > > /* > * Intel PXA2xx internal register mapping:
-- Regards,
Laurent Pinchart
| |