lkml.org 
[lkml]   [2014]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
Hi Kumar,

<snip>

> diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> new file mode 100644
> index 0000000..5e6f456
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> @@ -0,0 +1,12 @@
> +#include "qcom-ipq8064-v1.0.dtsi"
> +
> +/ {
> + model = "Qualcomm IPQ8064/DB149";
> + compatible = "qcom,ipq8064-db149", "qcom,ipq8064";

The patch subject saying AP148, and here AP149. Which is the wrong one?

> +
> + soc {
> + serial@16340000 {
> + status = "ok";
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> new file mode 100644
> index 0000000..7093b07
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> @@ -0,0 +1 @@
> +#include "qcom-ipq8064.dtsi"
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> new file mode 100644
> index 0000000..8ca3b51
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi

<snip>

> +
> + intc: interrupt-controller@2000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = < 0x02000000 0x1000 >,
> + < 0x02002000 0x1000 >;

extra spaces around these numbers

regards,
Stan


\
 
 \ /
  Last update: 2014-04-08 23:41    [W:0.051 / U:74.104 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site