lkml.org 
[lkml]   [2014]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/reboot] [PATCH] x86: Try the BIOS reboot method before the PCI reboot method
Commit-ID:  d122ab8d224a59aa0c3e4ba3540c6ab99556c3e3
Gitweb: http://git.kernel.org/tip/d122ab8d224a59aa0c3e4ba3540c6ab99556c3e3
Author: Ingo Molnar <mingo@kernel.org>
AuthorDate: Fri, 4 Apr 2014 08:41:26 +0200
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Fri, 4 Apr 2014 08:48:03 +0200

[PATCH] x86: Try the BIOS reboot method before the PCI reboot method

Steve reported a reboot hang and bisected it back to this commit:

a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list

He heroically tested all reboot methods and found the following:

reboot=t # triple fault ok
reboot=k # keyboard ctrl FAIL
reboot=b # BIOS ok
reboot=a # ACPI FAIL
reboot=e # EFI FAIL [system has no EFI]
reboot=p # PCI 0xcf9 FAIL

And I think it's pretty obvious that we should only try 0xcf9 as a
last resort - if at all.

The other observation is that (on this box) we should try the 'BIOS'
method before the PCI method.

Thirdly, CF9_COND is a total misnomer - it should be something like
CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ...

So this patch fixes the worst problems:

- it orders the actual reboot logic to follow the reboot ordering
pattern - it was in a pretty random order before for no good
reason.

- it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and
BOOT_CF9_SAFE flags to make the code more obvious.

- it tries the BIOS reboot method before the PCI reboot method.

Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/kernel/reboot.c | 68 +++++++++++++++++++++++++-----------------------
include/linux/reboot.h | 14 +++++-----
2 files changed, 43 insertions(+), 39 deletions(-)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 654b465..527dbcb 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -114,8 +114,8 @@ EXPORT_SYMBOL(machine_real_restart);
*/
static int __init set_pci_reboot(const struct dmi_system_id *d)
{
- if (reboot_type != BOOT_CF9) {
- reboot_type = BOOT_CF9;
+ if (reboot_type != BOOT_CF9_FORCE) {
+ reboot_type = BOOT_CF9_FORCE;
pr_info("%s series board detected. Selecting %s-method for reboots.\n",
d->ident, "PCI");
}
@@ -468,10 +468,15 @@ void __attribute__((weak)) mach_reboot_fixups(void)
* 6) If still alive, write to the PCI IO port 0xCF9 to reboot
* 7) If still alive, inform BIOS to do a proper reboot
*
- * If the machine is still alive at this stage, it gives up. We default to
- * following the same pattern, except that if we're still alive after (7) we'll
- * try to force a triple fault and then cycle between hitting the keyboard
- * controller and doing that
+ * If the machine is still alive at this stage, it gives up.
+ *
+ * We default to following the same pattern, except that we try
+ * (7) [BIOS] before (6) [PCI], and we add 8): try to force a
+ * triple fault and then cycle between hitting the keyboard
+ * controller and doing that.
+ *
+ * This means that this function can never return, it can misbehave
+ * by not rebooting properly and hanging.
*/
static void native_machine_emergency_restart(void)
{
@@ -492,6 +497,11 @@ static void native_machine_emergency_restart(void)
for (;;) {
/* Could also try the reset bit in the Hammer NB */
switch (reboot_type) {
+ case BOOT_ACPI:
+ acpi_reboot();
+ reboot_type = BOOT_KBD;
+ break;
+
case BOOT_KBD:
mach_reboot_fixups(); /* For board specific fixups */

@@ -509,43 +519,29 @@ static void native_machine_emergency_restart(void)
}
break;

- case BOOT_TRIPLE:
- load_idt(&no_idt);
- __asm__ __volatile__("int3");
-
- /* We're probably dead after this, but... */
- reboot_type = BOOT_KBD;
- break;
-
- case BOOT_BIOS:
- machine_real_restart(MRR_BIOS);
-
- /* We're probably dead after this, but... */
- reboot_type = BOOT_TRIPLE;
- break;
-
- case BOOT_ACPI:
- acpi_reboot();
- reboot_type = BOOT_KBD;
- break;
-
case BOOT_EFI:
if (efi_enabled(EFI_RUNTIME_SERVICES))
efi.reset_system(reboot_mode == REBOOT_WARM ?
EFI_RESET_WARM :
EFI_RESET_COLD,
EFI_SUCCESS, 0, NULL);
- reboot_type = BOOT_CF9_COND;
+ reboot_type = BOOT_BIOS;
+ break;
+
+ case BOOT_BIOS:
+ machine_real_restart(MRR_BIOS);
+
+ /* We're probably dead after this, but... */
+ reboot_type = BOOT_CF9_SAFE;
break;

- case BOOT_CF9:
+ case BOOT_CF9_FORCE:
port_cf9_safe = true;
/* Fall through */

- case BOOT_CF9_COND:
+ case BOOT_CF9_SAFE:
if (port_cf9_safe) {
- u8 reboot_code = reboot_mode == REBOOT_WARM ?
- 0x06 : 0x0E;
+ u8 reboot_code = reboot_mode == REBOOT_WARM ? 0x06 : 0x0E;
u8 cf9 = inb(0xcf9) & ~reboot_code;
outb(cf9|2, 0xcf9); /* Request hard reset */
udelay(50);
@@ -553,7 +549,15 @@ static void native_machine_emergency_restart(void)
outb(cf9|reboot_code, 0xcf9);
udelay(50);
}
- reboot_type = BOOT_BIOS;
+ reboot_type = BOOT_TRIPLE;
+ break;
+
+ case BOOT_TRIPLE:
+ load_idt(&no_idt);
+ __asm__ __volatile__("int3");
+
+ /* We're probably dead after this, but... */
+ reboot_type = BOOT_KBD;
break;
}
}
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index 9e7db9e..48bf152 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -20,13 +20,13 @@ enum reboot_mode {
extern enum reboot_mode reboot_mode;

enum reboot_type {
- BOOT_TRIPLE = 't',
- BOOT_KBD = 'k',
- BOOT_BIOS = 'b',
- BOOT_ACPI = 'a',
- BOOT_EFI = 'e',
- BOOT_CF9 = 'p',
- BOOT_CF9_COND = 'q',
+ BOOT_TRIPLE = 't',
+ BOOT_KBD = 'k',
+ BOOT_BIOS = 'b',
+ BOOT_ACPI = 'a',
+ BOOT_EFI = 'e',
+ BOOT_CF9_FORCE = 'p',
+ BOOT_CF9_SAFE = 'q',
};
extern enum reboot_type reboot_type;


\
 
 \ /
  Last update: 2014-04-04 10:41    [W:0.246 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site