lkml.org 
[lkml]   [2014]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/20] of/fdt: create common debugfs
On 04/04/2014 03:00 PM, Rob Herring wrote:
> On Fri, Apr 4, 2014 at 7:16 AM, Michal Simek <monstr@monstr.eu> wrote:
>> On 04/04/2014 12:16 AM, Rob Herring wrote:
>>> From: Rob Herring <robh@kernel.org>
>>>
>>> Both powerpc and microblaze have the same FDT blob in debugfs feature.
>>> Move this to common location and remove the powerpc and microblaze
>>> implementations. This feature could become more useful when FDT
>>> overlay support is added.
>>>
>>> This changes the path of the blob from "$arch/flat-device-tree" to
>>> "device-tree/flat-device-tree".
>
> [snip]
>
>>> -#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
>>> -static struct debugfs_blob_wrapper flat_dt_blob;
>>> -
>>> -static int __init export_flat_device_tree(void)
>>> -{
>>> - struct dentry *d;
>>> -
>>> - flat_dt_blob.data = initial_boot_params;
>>> - flat_dt_blob.size = initial_boot_params->totalsize;
>>
>> As I see even microblaze version was buggy.
>
> How so?

if you compare it with powerpc version here is missing
be to cpu conversion.

>
>> ...
>>
>>> diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
>>> index fa16a91..2085d47 100644
>>> --- a/drivers/of/fdt.c
>>> +++ b/drivers/of/fdt.c
>>> @@ -20,6 +20,7 @@
>>> #include <linux/string.h>
>>> #include <linux/errno.h>
>>> #include <linux/slab.h>
>>> +#include <linux/debugfs.h>
>>>
>>> #include <asm/setup.h> /* for COMMAND_LINE_SIZE */
>>> #ifdef CONFIG_PPC
>>> @@ -1084,4 +1085,27 @@ void __init unflatten_and_copy_device_tree(void)
>>> unflatten_device_tree();
>>> }
>>>
>>> +#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
>>> +static struct debugfs_blob_wrapper flat_dt_blob;
>>> +
>>> +static int __init of_flat_dt_debugfs_export_fdt(void)
>>> +{
>>> + struct dentry *d = debugfs_create_dir("device-tree", NULL);
>>> +
>>> + if (!d)
>>> + return -ENOENT;
>>> +
>>> + flat_dt_blob.data = initial_boot_params;
>>> + flat_dt_blob.size = fdt_totalsize(initial_boot_params);
>>
>> Have you tried to compile this?
>>
>> From my tests fdt_totalsize is not available for target just for host
>> from libfdt.h
>>
>> drivers/of/fdt.c: In function 'of_flat_dt_debugfs_export_fdt':
>> drivers/of/fdt.c:957:2: error: implicit declaration of function 'fdt_totalsize' [-Werror=implicit-function-declaration]
>
> Ah, it needs to be re-ordered after the libfdt conversion when
> libfdt.h gets added.

I just pick some of them not all of them and send email. :-(

Anyway I am testing it for microblaze and getting problem
caused by this patch:
commit 3d2ee8571ac0580d49c3f41fa28336289934900a
Author: Rob Herring <robh@kernel.org>
Date: Wed Apr 2 15:10:14 2014 -0500

of/fdt: Convert FDT functions to use libfdt

And reason is that in unflatten_dt_node()

pathp = fdt_get_name(blob, *poffset, &l);

is returning NULL
and here
/* version 0x10 has a more compact unit name here instead of the full
* path. we accumulate the full path size using "fpsize", we'll rebuild
* it later. We detect this because the first character of the name is
* not '/'.
*/
if ((*pathp) != '/') {

code is trying to read it which is causing this kernel bug:
Oops: kernel access of bad area, sig: 11

It means fdt_next_node(is doing something wrong)

Any easy way how to debug it?

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform

/*
* Device Tree Generator version: 1.1
*
* (C) Copyright 2007-2013 Xilinx, Inc.
* (C) Copyright 2007-2013 Michal Simek
* (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
*
* Michal SIMEK <monstr@monstr.eu>
*
* CAUTION: This file is automatically generated by libgen.
* Version: Xilinx EDK 2013.3 EDK_P.20131013
* Today is: Thursday, the 21 of November, 2013; 19:47:51
*
* XPS project directory: .
*/

/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,microblaze";
hard-reset-gpios = <&reset_gpio 0 1>;
model = ".";
aliases {
ethernet0 = &axi_ethernet_eth_buf;
serial0 = &rs232_uart;
} ;
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
linux,stdout-path = "/axi@0/serial@40400000";
} ;
cpus {
#address-cells = <1>;
#cpus = <0x1>;
#size-cells = <0>;
microblaze_0: cpu@0 {
bus-handle = <&microblaze_0_axi_periph_xbar>;
clock-frequency = <100000000>;
compatible = "xlnx,microblaze-9.2";
d-cache-baseaddr = <0x80000000>;
d-cache-highaddr = <0xbfffffff>;
d-cache-line-size = <0x20>;
d-cache-size = <0x4000>;
device_type = "cpu";
i-cache-baseaddr = <0x80000000>;
i-cache-highaddr = <0xbfffffff>;
i-cache-line-size = <0x10>;
i-cache-size = <0x4000>;
interrupt-handle = <&microblaze_0_axi_intc>;
model = "microblaze,9.2";
reg = <0>;
timebase-frequency = <100000000>;
xlnx,addr-tag-bits = <0x10>;
xlnx,allow-dcache-wr = <0x1>;
xlnx,allow-icache-wr = <0x1>;
xlnx,area-optimized = <0x0>;
xlnx,async-interrupt = <0x1>;
xlnx,avoid-primitives = <0x0>;
xlnx,base-vectors = <0x0>;
xlnx,branch-target-cache-size = <0x0>;
xlnx,cache-byte-size = <0x4000>;
xlnx,d-axi = <0x1>;
xlnx,d-lmb = <0x1>;
xlnx,data-size = <0x20>;
xlnx,dcache-addr-tag = <0x10>;
xlnx,dcache-always-used = <0x1>;
xlnx,dcache-byte-size = <0x4000>;
xlnx,dcache-data-width = <0x0>;
xlnx,dcache-force-tag-lutram = <0x0>;
xlnx,dcache-line-len = <0x8>;
xlnx,dcache-use-writeback = <0x1>;
xlnx,dcache-victims = <0x0>;
xlnx,debug-enabled = <0x1>;
xlnx,div-zero-exception = <0x1>;
xlnx,dynamic-bus-sizing = <0x0>;
xlnx,ecc-use-ce-exception = <0x0>;
xlnx,edge-is-positive = <0x0>;
xlnx,enable-discrete-ports = <0x0>;
xlnx,endianness = <0x1>;
xlnx,fault-tolerant = <0x0>;
xlnx,fpu-exception = <0x0>;
xlnx,freq = <0x5f5e100>;
xlnx,fsl-exception = <0x0>;
xlnx,fsl-links = <0x0>;
xlnx,i-axi = <0x0>;
xlnx,i-lmb = <0x1>;
xlnx,icache-always-used = <0x1>;
xlnx,icache-data-width = <0x0>;
xlnx,icache-force-tag-lutram = <0x0>;
xlnx,icache-line-len = <0x4>;
xlnx,icache-streams = <0x1>;
xlnx,icache-victims = <0x8>;
xlnx,ill-opcode-exception = <0x1>;
xlnx,instance = "kc705_microblaze_0_0";
xlnx,interconnect = <0x2>;
xlnx,interrupt-is-edge = <0x0>;
xlnx,lockstep-select = <0x0>;
xlnx,lockstep-slave = <0x0>;
xlnx,mmu-dtlb-size = <0x4>;
xlnx,mmu-itlb-size = <0x2>;
xlnx,mmu-privileged-instr = <0x0>;
xlnx,mmu-tlb-access = <0x3>;
xlnx,mmu-zones = <0x2>;
xlnx,number-of-pc-brk = <0x1>;
xlnx,number-of-rd-addr-brk = <0x0>;
xlnx,number-of-wr-addr-brk = <0x0>;
xlnx,opcode-0x0-illegal = <0x1>;
xlnx,optimization = <0x0>;
xlnx,pc-width = <0x20>;
xlnx,pvr = <0x2>;
xlnx,pvr-user1 = <0x0>;
xlnx,pvr-user2 = <0x0>;
xlnx,reset-msr = <0x0>;
xlnx,sco = <0x0>;
xlnx,trace = <0x0>;
xlnx,unaligned-exceptions = <0x1>;
xlnx,use-barrel = <0x1>;
xlnx,use-branch-target-cache = <0x1>;
xlnx,use-config-reset = <0x0>;
xlnx,use-dcache = <0x1>;
xlnx,use-div = <0x1>;
xlnx,use-ext-brk = <0x0>;
xlnx,use-ext-nm-brk = <0x0>;
xlnx,use-extended-fsl-instr = <0x0>;
xlnx,use-fpu = <0x0>;
xlnx,use-hw-mul = <0x2>;
xlnx,use-icache = <0x1>;
xlnx,use-interrupt = <0x2>;
xlnx,use-mmu = <0x3>;
xlnx,use-msr-instr = <0x1>;
xlnx,use-pcmp-instr = <0x1>;
xlnx,use-reorder-instr = <0x1>;
xlnx,use-stack-protection = <0x0>;
} ;
} ;
ddr3_sdram: memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>;
} ;
microblaze_0_axi_periph_xbar: axi@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,axi-crossbar-2.1", "simple-bus";
ranges ;
axi_ethernet_dma: axi-dma@41e00000 {
axistream-connected = <&axi_ethernet_eth_buf>;
axistream-control-connected = <&axi_ethernet_eth_buf>;
compatible = "xlnx,axi-dma-7.1", "xlnx,axi-dma-1.00.a";
interrupt-parent = <&microblaze_0_axi_intc>;
interrupts = <2 2>, <3 2>;
reg = <0x41e00000 0x10000>;
xlnx,dlytmr-resolution = <0x7d>;
xlnx,enable-multi-channel = <0x0>;
xlnx,include-mm2s = <0x1>;
xlnx,include-mm2s-dre = <0x1>;
xlnx,include-mm2s-sf = <0x1>;
xlnx,include-s2mm = <0x1>;
xlnx,include-s2mm-dre = <0x1>;
xlnx,include-s2mm-sf = <0x1>;
xlnx,include-sg = <0x1>;
xlnx,micro-dma = <0x0>;
xlnx,mm2s-burst-size = <0x10>;
xlnx,num-mm2s-channels = <0x1>;
xlnx,num-s2mm-channels = <0x1>;
xlnx,prmry-is-aclk-async = <0x0>;
xlnx,s2mm-burst-size = <0x10>;
xlnx,sg-include-stscntrl-strm = <0x1>;
xlnx,sg-length-width = <0xe>;
xlnx,sg-use-stsapp-length = <0x1>;
} ;
axi_ethernet_eth_buf: axi-ethernet@44a00000 {
axistream-connected = <&axi_ethernet_dma>;
axistream-control-connected = <&axi_ethernet_dma>;
clock-frequency = <100000000>;
compatible = "xlnx,axi-ethernet-buffer-2.0", "xlnx,axi-ethernet-1.00.a";
device_type = "network";
interrupt-parent = <&microblaze_0_axi_intc>;
interrupts = <1 2>;
local-mac-address = [ 00 0a 35 00 42 4a ];
phy-handle = <&phy0>;
reg = <0x44a00000 0x40000>;
xlnx,avb = <0x0>;
xlnx,halfdup = "1";
xlnx,include-io = "1";
xlnx,mcast-extend = <0x0>;
xlnx,phy-type = <0x1>;
xlnx,phyaddr = <0x1>;
xlnx,rxcsum = <0x0>;
xlnx,rxmem = <0x1000>;
xlnx,rxvlan-strp = <0x0>;
xlnx,rxvlan-tag = <0x0>;
xlnx,rxvlan-tran = <0x0>;
xlnx,stats = <0x0>;
xlnx,txcsum = <0x0>;
xlnx,txmem = <0x1000>;
xlnx,txvlan-strp = <0x0>;
xlnx,txvlan-tag = <0x0>;
xlnx,txvlan-tran = <0x0>;
xlnx,type = <0x1>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@7 {
compatible = "marvell,88e1111";
device_type = "ethernet-phy";
reg = <7>;
} ;
} ;
} ;
axi_timer_0: system-timer@41c00000 {
clock-frequency = <100000000>;
compatible = "xlnx,axi-timer-2.0", "xlnx,xps-timer-1.00.a";
interrupt-parent = <&microblaze_0_axi_intc>;
interrupts = <0 2>;
reg = <0x41c00000 0x10000>;
xlnx,count-width = <0x20>;
xlnx,gen0-assert = <0x1>;
xlnx,gen1-assert = <0x1>;
xlnx,one-timer-only = <0x0>;
xlnx,trig0-assert = <0x1>;
xlnx,trig1-assert = <0x1>;
} ;
dip_switches_4bits: gpio@40010000 {
#gpio-cells = <2>;
compatible = "xlnx,axi-gpio-2.0", "xlnx,xps-gpio-1.00.a";
gpio-controller ;
reg = <0x40010000 0x10000>;
xlnx,all-inputs = <0x1>;
xlnx,all-inputs-2 = <0x0>;
xlnx,all-outputs = <0x0>;
xlnx,all-outputs-2 = <0x0>;
xlnx,dout-default = <0x0>;
xlnx,dout-default-2 = <0x0>;
xlnx,gpio-width = <0x4>;
xlnx,gpio2-width = <0x20>;
xlnx,interrupt-present = <0x0>;
xlnx,is-dual = <0x0>;
xlnx,tri-default = <0xffffffff>;
xlnx,tri-default-2 = <0xffffffff>;
} ;
led_8bits: gpio@40020000 {
#gpio-cells = <2>;
compatible = "xlnx,axi-gpio-2.0", "xlnx,xps-gpio-1.00.a";
gpio-controller ;
reg = <0x40020000 0x10000>;
xlnx,all-inputs = <0x0>;
xlnx,all-inputs-2 = <0x0>;
xlnx,all-outputs = <0x1>;
xlnx,all-outputs-2 = <0x0>;
xlnx,dout-default = <0x0>;
xlnx,dout-default-2 = <0x0>;
xlnx,gpio-width = <0x8>;
xlnx,gpio2-width = <0x20>;
xlnx,interrupt-present = <0x0>;
xlnx,is-dual = <0x0>;
xlnx,tri-default = <0xffffffff>;
xlnx,tri-default-2 = <0xffffffff>;
} ;
microblaze_0_axi_intc: interrupt-controller@41200000 {
#interrupt-cells = <0x2>;
compatible = "xlnx,axi-intc-4.0", "xlnx,xps-intc-1.00.a";
interrupt-controller ;
reg = <0x41200000 0x10000>;
xlnx,kind-of-intr = <0x0>;
xlnx,num-intr-inputs = <0x5>;
} ;
primary_flash: flash@60000000 {
#address-cells = <1>;
#size-cells = <1>;
bank-width = <2>;
compatible = "xlnx,axi-emc-2.0", "cfi-flash";
reg = <0x60000000 0x8000000>;
xlnx,axi-clk-period-ps = <0x2710>;
xlnx,include-datawidth-matching-0 = <0x1>;
xlnx,include-datawidth-matching-1 = <0x1>;
xlnx,include-datawidth-matching-2 = <0x1>;
xlnx,include-datawidth-matching-3 = <0x1>;
xlnx,include-negedge-ioregs = <0x0>;
xlnx,instance = "axi_emc_inst";
xlnx,lflash-period-ps = <0x4e20>;
xlnx,linear-flash-sync-burst = <0x0>;
xlnx,max-mem-width = <0x10>;
xlnx,mem0-type = <0x2>;
xlnx,mem0-width = <0x10>;
xlnx,mem1-type = <0x2>;
xlnx,mem1-width = <0x10>;
xlnx,mem2-type = <0x2>;
xlnx,mem2-width = <0x10>;
xlnx,mem3-type = <0x2>;
xlnx,mem3-width = <0x10>;
xlnx,num-banks-mem = <0x1>;
xlnx,parity-type-mem-0 = <0x0>;
xlnx,parity-type-mem-1 = <0x0>;
xlnx,parity-type-mem-2 = <0x0>;
xlnx,parity-type-mem-3 = <0x0>;
xlnx,s-axi-en-reg = <0x0>;
xlnx,s-axi-mem-addr-width = <0x20>;
xlnx,s-axi-mem-data-width = <0x20>;
xlnx,s-axi-mem-id-width = <0x1>;
xlnx,s-axi-reg-addr-width = <0x5>;
xlnx,s-axi-reg-data-width = <0x20>;
xlnx,synch-pipedelay-0 = <0x1>;
xlnx,synch-pipedelay-1 = <0x1>;
xlnx,synch-pipedelay-2 = <0x1>;
xlnx,synch-pipedelay-3 = <0x1>;
xlnx,tavdv-ps-mem-0 = <0x1fbd0>;
xlnx,tavdv-ps-mem-1 = <0x3a98>;
xlnx,tavdv-ps-mem-2 = <0x3a98>;
xlnx,tavdv-ps-mem-3 = <0x3a98>;
xlnx,tcedv-ps-mem-0 = <0x1fbd0>;
xlnx,tcedv-ps-mem-1 = <0x3a98>;
xlnx,tcedv-ps-mem-2 = <0x3a98>;
xlnx,tcedv-ps-mem-3 = <0x3a98>;
xlnx,thzce-ps-mem-0 = <0x1b58>;
xlnx,thzce-ps-mem-1 = <0x1b58>;
xlnx,thzce-ps-mem-2 = <0x1b58>;
xlnx,thzce-ps-mem-3 = <0x1b58>;
xlnx,thzoe-ps-mem-0 = <0x1b58>;
xlnx,thzoe-ps-mem-1 = <0x1b58>;
xlnx,thzoe-ps-mem-2 = <0x1b58>;
xlnx,thzoe-ps-mem-3 = <0x1b58>;
xlnx,tlzwe-ps-mem-0 = <0xc350>;
xlnx,tlzwe-ps-mem-1 = <0x0>;
xlnx,tlzwe-ps-mem-2 = <0x0>;
xlnx,tlzwe-ps-mem-3 = <0x0>;
xlnx,tpacc-ps-flash-0 = <0x61a8>;
xlnx,tpacc-ps-flash-1 = <0x61a8>;
xlnx,tpacc-ps-flash-2 = <0x61a8>;
xlnx,tpacc-ps-flash-3 = <0x61a8>;
xlnx,twc-ps-mem-0 = <0x3a98>;
xlnx,twc-ps-mem-1 = <0x3a98>;
xlnx,twc-ps-mem-2 = <0x3a98>;
xlnx,twc-ps-mem-3 = <0x3a98>;
xlnx,twp-ps-mem-0 = <0x13880>;
xlnx,twp-ps-mem-1 = <0x2ee0>;
xlnx,twp-ps-mem-2 = <0x2ee0>;
xlnx,twp-ps-mem-3 = <0x2ee0>;
xlnx,twph-ps-mem-0 = <0x13880>;
xlnx,twph-ps-mem-1 = <0x2ee0>;
xlnx,twph-ps-mem-2 = <0x2ee0>;
xlnx,twph-ps-mem-3 = <0x2ee0>;
xlnx,wr-rec-time-mem-0 = <0x186a0>;
xlnx,wr-rec-time-mem-1 = <0x6978>;
xlnx,wr-rec-time-mem-2 = <0x6978>;
xlnx,wr-rec-time-mem-3 = <0x6978>;
partition@0x00000000 {
label = "fpga";
reg = <0x00000000 0x00b00000>;
};
partition@0x00b00000 {
label = "boot";
reg = <0x00b00000 0x00040000>;
};
partition@0x00b40000 {
label = "bootenv";
reg = <0x00b40000 0x00020000>;
};
partition@0x00b60000 {
label = "image";
reg = <0x00b60000 0x00c00000>;
};
partition@0x01760000 {
label = "spare";
reg = <0x01760000 0x00000000>;
};
} ;
push_buttons_5bits: gpio@40030000 {
#gpio-cells = <2>;
compatible = "xlnx,axi-gpio-2.0", "xlnx,xps-gpio-1.00.a";
gpio-controller ;
reg = <0x40030000 0x10000>;
xlnx,all-inputs = <0x1>;
xlnx,all-inputs-2 = <0x0>;
xlnx,all-outputs = <0x0>;
xlnx,all-outputs-2 = <0x0>;
xlnx,dout-default = <0x0>;
xlnx,dout-default-2 = <0x0>;
xlnx,gpio-width = <0x5>;
xlnx,gpio2-width = <0x20>;
xlnx,interrupt-present = <0x0>;
xlnx,is-dual = <0x0>;
xlnx,tri-default = <0xffffffff>;
xlnx,tri-default-2 = <0xffffffff>;
} ;
reset_gpio: gpio@40000000 {
#gpio-cells = <2>;
compatible = "xlnx,axi-gpio-2.0", "xlnx,xps-gpio-1.00.a";
gpio-controller ;
reg = <0x40000000 0x10000>;
xlnx,all-inputs = <0x0>;
xlnx,all-inputs-2 = <0x0>;
xlnx,all-outputs = <0x1>;
xlnx,all-outputs-2 = <0x0>;
xlnx,dout-default = <0x0>;
xlnx,dout-default-2 = <0x0>;
xlnx,gpio-width = <0x1>;
xlnx,gpio2-width = <0x20>;
xlnx,interrupt-present = <0x0>;
xlnx,is-dual = <0x0>;
xlnx,tri-default = <0xffffffff>;
xlnx,tri-default-2 = <0xffffffff>;
} ;
rs232_uart: serial@40400000 {
clock-frequency = <100000000>;
compatible = "xlnx,axi-uart16550-2.0", "xlnx,xps-uart16550-2.00.a", "ns16550a";
current-speed = <115200>;
device_type = "serial";
interrupt-parent = <&microblaze_0_axi_intc>;
interrupts = <4 2>;
reg = <0x40400000 0x2000>;
reg-offset = <0x1000>;
reg-shift = <2>;
xlnx,external-xin-clk-hz = <0x17d7840>;
xlnx,external-xin-clk-hz-d = <0x19>;
xlnx,has-external-rclk = <0x0>;
xlnx,has-external-xin = <0x0>;
xlnx,is-a-16550 = <0x1>;
xlnx,s-axi-aclk-freq-hz-d = <0x64>;
xlnx,use-modem-ports = <0x1>;
xlnx,use-user-ports = <0x1>;
} ;
} ;
} ;
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-04-04 15:41    [W:0.097 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site