Messages in this thread | | | From | Peter Feuerer <> | Subject | Re: [PATCH v2 4/4] acerhdf: Use bang-bang thermal governor | Date | Tue, 29 Apr 2014 18:43:07 +0200 |
| |
Javi Merino writes:
> On Tue, Apr 29, 2014 at 10:17:57AM +0100, Peter Feuerer wrote: >> acerhdf has been doing an on-off fan control using hysteresis by >> post-manipulating the outcome of thermal subsystem trip point handling. >> This patch enables acerhdf to use the bang-bang governor, which is >> intended for on-off controlled fans. >> >> CC: Zhang Rui <rui.zhang@intel.com> >> Cc: Andreas Mohr <andi@lisas.de> >> Cc: Borislav Petkov <bp@suse.de> >> Signed-off-by: Peter Feuerer <peter@piie.net> >> --- >> drivers/platform/x86/Kconfig | 2 +- >> drivers/platform/x86/acerhdf.c | 48 +++++++++++++++++++++++++++++++++++------- >> 2 files changed, 41 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig >> index 27df2c5..0c15d89 100644 >> --- a/drivers/platform/x86/Kconfig >> +++ b/drivers/platform/x86/Kconfig >> @@ -38,7 +38,7 @@ config ACER_WMI >> >> config ACERHDF >> tristate "Acer Aspire One temperature and fan driver" >> - depends on THERMAL && ACPI >> + depends on ACPI && THERMAL_GOV_BANG_BANG >> ---help--- >> This is a driver for Acer Aspire One netbooks. It allows to access >> the temperature sensor and to control the fan. >> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c >> index 176edbd..f3884f9 100644 >> --- a/drivers/platform/x86/acerhdf.c >> +++ b/drivers/platform/x86/acerhdf.c >> @@ -50,7 +50,7 @@ >> */ >> #undef START_IN_KERNEL_MODE >> >> -#define DRV_VER "0.5.30" >> +#define DRV_VER "0.5.31" >> >> /* >> * According to the Atom N270 datasheet, >> @@ -135,8 +135,8 @@ struct bios_settings_t { >> const char *vendor; >> const char *product; >> const char *version; >> - unsigned char fanreg; >> - unsigned char tempreg; >> + u8 fanreg; >> + u8 tempreg; >> struct fancmd cmd; >> int mcmd_enable; >> }; >> @@ -259,6 +259,17 @@ static const struct bios_settings_t bios_tbl[] = { >> >> static const struct bios_settings_t *bios_cfg __read_mostly; >> >> +/* >> + * this struct is used to instruct thermal layer to use bang_bang instead of >> + * default governor for acerhdf >> + */ >> +static struct thermal_zone_params acerhdf_zone_params = { >> + .governor_name = "bang_bang", >> + .no_hwmon = 0, >> + .num_tbps = 0, >> + .tbp = 0, >> +}; > > You don't need to initialize statics to 0. checkpatch only considers > it an error if it finds it in a variable, but I think it also applies > to fields in struct.
I agree, this is superfluous. I'll remove those lines.
>> + >> static int acerhdf_get_temp(int *temp) >> { >> u8 read_temp; >> @@ -436,6 +447,17 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip, >> { >> if (trip == 0) >> *type = THERMAL_TRIP_ACTIVE; >> + if (trip == 1) >> + *type = THERMAL_TRIP_CRITICAL; > > This looks like an unrelated change that should be on a patch on its > own.
Yes, will do so.
>> + >> + return 0; >> +} >> + >> +static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip, >> + unsigned long *temp) >> +{ >> + if (trip == 0) >> + *temp = fanon - fanoff; >> >> return 0; >> } >> @@ -445,6 +467,8 @@ static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip, >> { >> if (trip == 0) >> *temp = fanon; >> + else if (trip == 1) >> + *temp = ACERHDF_TEMP_CRIT; >> >> return 0; >> } >> @@ -464,8 +488,10 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = { >> .get_mode = acerhdf_get_mode, >> .set_mode = acerhdf_set_mode, >> .get_trip_type = acerhdf_get_trip_type, >> + .get_trip_hyst = acerhdf_get_trip_hyst, >> .get_trip_temp = acerhdf_get_trip_temp, >> .get_crit_temp = acerhdf_get_crit_temp, >> + .notify = NULL, > > Same as before, no need to initialize static to NULL.
Ok, thanks.
-- kind regards, --peter;
| |