lkml.org 
[lkml]   [2014]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mfd: twl6040: Optional clk32k clock handling
On Mon, 28 Apr 2014, Peter Ujfalusi wrote:

> On 04/28/2014 01:36 PM, Lee Jones wrote:
> >> In certain boards the source for the clk32k clock can be gated. In these
> >> boards the clk32k clock can be provided to the driver and it is going to be
> >> enabled/disabled when it is needed.
> >> If the clk32k clock is not provided the driver will assume that it is always
> >> running.
> >>
> >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> >> ---
> >> Documentation/devicetree/bindings/mfd/twl6040.txt | 2 ++
> >> drivers/mfd/twl6040.c | 10 ++++++++++
> >> include/linux/mfd/twl6040.h | 2 ++
> >> 3 files changed, 14 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
> >> index 0f5dd709d752..a41157b5d930 100644
> >> --- a/Documentation/devicetree/bindings/mfd/twl6040.txt
> >> +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
> >> @@ -19,6 +19,8 @@ Required properties:
> >>
> >> Optional properties, nodes:
> >> - enable-active-high: To power on the twl6040 during boot.
> >> +- clocks: phandle to the clk32k clock provider
> >> +- clock-names: Must be "clk32k"
> >>
> >> Vibra functionality
> >> Required properties:
> >> diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
> >> index 2e6504a8e1e3..12b314ea48dc 100644
> >> --- a/drivers/mfd/twl6040.c
> >> +++ b/drivers/mfd/twl6040.c
> >> @@ -291,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
> >> if (twl6040->power_count++)
> >> goto out;
> >>
> >> + clk_prepare_enable(twl6040->clk32k);
> >> +
> >> /* Allow writes to the chip */
> >> regcache_cache_only(twl6040->regmap, false);
> >>
> >> @@ -346,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
> >>
> >> twl6040->sysclk = 0;
> >> twl6040->mclk = 0;
> >> +
> >> + clk_disable_unprepare(twl6040->clk32k);
> >> }
> >>
> >> out:
> >> @@ -644,6 +648,12 @@ static int twl6040_probe(struct i2c_client *client,
> >>
> >> i2c_set_clientdata(client, twl6040);
> >>
> >> + twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
> >> + if (IS_ERR(twl6040->clk32k)) {
> >> + dev_info(&client->dev, "clk32k is not handled\n");
> >> + twl6040->clk32k = NULL;
> >
> > So what happens if you pass a NULL clk reference to clk_prepare_enable()?
>
> We have checks for !clk in all cases within the clk_* API. If we pass NULL,
> nothing will happen and from the calling driver point of view it will look
> like a success.
> AFAIK this is the way to handle non esential/optional clocks without if()s in
> the driver code around the clock handling.

Okay, so long as those checks are there, we're all good.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-04-28 15:21    [W:0.090 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site