lkml.org 
[lkml]   [2014]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 03/18] usb: host: xhci-plat: Add support for the Armada 38x
On Fri, Apr 25, 2014 at 04:07:01PM +0200, Gregory CLEMENT wrote:
> For the Armada 38x SoCs which come with an xhci controller, specific
> initialization must be done during probe related to the MBus windows
> configuration. This patch adds the support of this quirk.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
> drivers/usb/host/Kconfig | 7 +++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/xhci-mvebu.c | 71 +++++++++++++++++++++++++++++++++++++++++++
> drivers/usb/host/xhci-mvebu.h | 22 ++++++++++++++
> drivers/usb/host/xhci-plat.c | 5 +++
> 5 files changed, 106 insertions(+)
> create mode 100644 drivers/usb/host/xhci-mvebu.c
> create mode 100644 drivers/usb/host/xhci-mvebu.h
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 3d9e54062d62..e70943fac4a1 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -29,6 +29,13 @@ if USB_XHCI_HCD
> config USB_XHCI_PLATFORM
> tristate
>
> +config USB_XHCI_MVEBU
> + tristate "xHCI support for Marvell Armada 38x"
> + select USB_XHCI_PLATFORM
> + ---help---
> + Say 'Y' to enable the support for the xHCI host controller
> + found in Marvell Armada 38x ARM SOCs.
> +
> endif # USB_XHCI_HCD
>
> config USB_EHCI_HCD
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 7530468c9a4f..7a8db7f7dc01 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -19,6 +19,7 @@ xhci-hcd-$(CONFIG_PCI) += xhci-pci.o
>
> ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
> xhci-hcd-y += xhci-plat.o
> + xhci-hcd-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
> endif
>
> obj-$(CONFIG_USB_WHCI_HCD) += whci/
> diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
> new file mode 100644
> index 000000000000..09cf437499fb
> --- /dev/null
> +++ b/drivers/usb/host/xhci-mvebu.c
> @@ -0,0 +1,71 @@
> +/*
> + * Copyright (C) 2014 Marvell
> + * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/mbus.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#define USB3_MAX_WINDOWS 4
> +#define USB3_WIN_CTRL(w) (0x0 + ((w) * 8))
> +#define USB3_WIN_BASE(w) (0x4 + ((w) * 8))
> +
> +static void __init mv_usb3_conf_mbus_windows(void __iomem *base,
> + const struct mbus_dram_target_info *dram)
> +{
> + int win;
> +
> + /* Clear all existing windows */
> + for (win = 0; win < USB3_MAX_WINDOWS; win++) {
> + writel(0, base + USB3_WIN_CTRL(win));
> + writel(0, base + USB3_WIN_BASE(win));
> + }
> +
> + /* Program each DRAM CS in a seperate window */
> + for (win = 0; win < dram->num_cs; win++) {
> + const struct mbus_dram_window *cs = dram->cs + win;
> +
> + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
> + (dram->mbus_dram_target_id << 4) | 1,
> + base + USB3_WIN_CTRL(win));
> +
> + writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win));
> + }
> +}
> +
> +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev)
> +{
> + struct resource *res;
> + void __iomem *base;
> + const struct mbus_dram_target_info *dram;
> + int ret = 0;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res)
> + return -ENODEV;
> +
> + /*
> + * We don't use devm_ioremap() because this mapping should
> + * only exists for the duration of this probe function.
> + */
> + base = ioremap(res->start, resource_size(res));
> + if (!base)
> + return -ENODEV;
> +
> + dram = mv_mbus_dram_info();
> + mv_usb3_conf_mbus_windows(base, dram);
> +
> + /*
> + * This memory area was only needed to configure the MBus
> + * windows, and is therefore no longer useful.
> + */
> + iounmap(base);
> +
> + return ret;
> +}
> diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h
> new file mode 100644
> index 000000000000..5d7e647b3d27
> --- /dev/null
> +++ b/drivers/usb/host/xhci-mvebu.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (C) 2014 Marvell
> + *
> + * Gregory Clement <gregory.clement@free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#ifndef __LINUX_XHCI_MVEBU_H
> +#define __LINUX_XHCI_MVEBU_H
> +
> +#ifdef CONFIG_USB_XHCI_MVEBU

this is a tristate symbol, you're not treating the case where this is a
module. Have you really build-tested this patch ? It would give you
redefinition errors. Switch over to:

#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU)

> +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev);
> +#else
> +static inline int xhci_mvebu_mbus_init_quirk(struct device dev)
> +{
> + return 0;
> +}
> +#endif
> +#endif /* __LINUX_XHCI_MVEBU_H */
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index bb5d563f729c..c0e835b49e0d 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -19,6 +19,7 @@
> #include <linux/slab.h>
>
> #include "xhci.h"
> +#include "xhci-mvebu.h"
>
> static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
> {
> @@ -148,6 +149,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + if (of_device_is_compatible(pdev->dev.of_node, "marvell,armada-380-xhci"))

break the line at that , character

> + xhci_mvebu_mbus_init_quirk(pdev);
> +
> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> if (ret)
> @@ -279,6 +283,7 @@ static const struct dev_pm_ops xhci_plat_pm_ops = {
> static const struct of_device_id usb_xhci_of_match[] = {
> { .compatible = "generic-xhci" },
> { .compatible = "xhci-platform" },
> + { .compatible = "marvell,armada-380-xhci"},
> { },
> };
> MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
> --
> 1.8.1.2
>

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-04-25 17:41    [W:0.738 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site