lkml.org 
[lkml]   [2014]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] mfd: syscon: Support early initialization
On 04/23/2014 05:27 PM, Michal Simek wrote:
> On 04/23/2014 10:22 AM, Pankaj Dubey wrote:
>> On 04/23/2014 04:27 PM, Michal Simek wrote:
>>> On 04/10/2014 08:17 AM, Michal Simek wrote:
>>>> On 04/10/2014 08:20 AM, Pankaj Dubey wrote:
>>>>> Hi Michal,
>>>>>
>>>>> On 04/09/2014 12:00 AM, Michal Simek wrote:
>>>>>> Some platforms need to get system controller
>>>>>> ready as soon as possible.
>>>>>> The patch provides early_syscon_initialization
>>>>>> which create early mapping for all syscon compatible
>>>>>> devices in early_syscon_probe.
>>>>>> Regmap is get via syscon_early_regmap_lookup_by_phandle()
>>>>>>
>>>>>> Regular device probes attach device to regmap
>>>>>> via regmap_attach_dev().
>>>>>>
>>>>>> For early syscon initialization is necessary to extend
>>>>>> struct syscon and provide remove function
>>>>>> which unmap all early init structures.
>>>>>>
>>>>>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>>>>>> ---
>>>>>>
>>>>>> Changes in v3:
>>>>>> - Keep backward compatibility for platform drivers and test it
>>>>>> - Use only one probe method which is early_syscon_probe
>>>>>> suggested by Lee Jones. Do not force anybody to call early_syscon_init
>>>>>> - Add kernel-doc description
>>>>>>
>>>>>> Changes in v2:
>>>>>> - Fix bad logic in early_syscon_probe
>>>>>> - Fix compilation failure for x86_64 reported by zero day testing system
>>>>>> - Regmap change available here
>>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/nodev
>>>>>>
>>>>>> drivers/mfd/syscon.c | 159 ++++++++++++++++++++++++++++++++++++++++-----
>>>>>> include/linux/mfd/syscon.h | 11 ++++
>>>>>> 2 files changed, 153 insertions(+), 17 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
>>>>>> index 71841f9..8e2ff88 100644
>>>>>> --- a/drivers/mfd/syscon.c
>>>>>> +++ b/drivers/mfd/syscon.c
>>>>>> @@ -20,12 +20,15 @@
>>>>>> #include <linux/of_platform.h>
>>>>>> #include <linux/platform_device.h>
>>>>>> #include <linux/regmap.h>
>>>>>> +#include <linux/slab.h>
>>>>>> #include <linux/mfd/syscon.h>
>>>>>>
>>>>>> static struct platform_driver syscon_driver;
>>>>>>
>>>>>> struct syscon {
>>>>>> + void __iomem *base;
>>>>>> struct regmap *regmap;
>>>>>> + struct resource res;
>>>>>> };
>>>>>>
>>>>>> static int syscon_match_node(struct device *dev, void *data)
>>>>>> @@ -95,6 +98,30 @@ struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
>>>>>> }
>>>>>> EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_pdevname);
>>>>>>
>>>>>> +/**
>>>>>> + * syscon_early_regmap_lookup_by_phandle - Early phandle lookup function
>>>>>> + * @np: device_node pointer
>>>>>> + * @property: property name which handle system controller phandle
>>>>>> + * Return: regmap pointer, an error pointer otherwise
>>>>>> + */
>>>>>> +struct regmap *syscon_early_regmap_lookup_by_phandle(struct device_node *np,
>>>>>> + const char *property)
>>>>>> +{
>>>>>> + struct device_node *syscon_np;
>>>>>> + struct syscon *syscon;
>>>>>> +
>>>>>> + syscon_np = of_parse_phandle(np, property, 0);
>>>>>> + if (!syscon_np)
>>>>>> + return ERR_PTR(-ENODEV);
>>>>>> +
>>>>>> + syscon = syscon_np->data;
>>>>>> +
>>>>>> + of_node_put(syscon_np);
>>>>>> +
>>>>>> + return syscon->regmap;
>>>>>> +}
>>>>>> +EXPORT_SYMBOL_GPL(syscon_early_regmap_lookup_by_phandle);
>>>>>> +
>>>>>> struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
>>>>>> const char *property)
>>>>>> {
>>>>>> @@ -123,36 +150,118 @@ static struct regmap_config syscon_regmap_config = {
>>>>>> .reg_stride = 4,
>>>>>> };
>>>>>>
>>>>>> -static int syscon_probe(struct platform_device *pdev)
>>>>>> +/**
>>>>>> + * early_syscon_probe - Early system controller probe method
>>>>>> + * @np: device_node pointer
>>>>>> + * @syscon_p: syscon pointer
>>>>>> + * @res: device IO resource
>>>>>> + * Return: 0 if successful, a negative error code otherwise
>>>>>> + */
>>>>>> +static int early_syscon_probe(struct device_node *np, struct syscon **syscon_p,
>>>>>> + struct resource *res)
>>>>>> {
>>>>>> - struct device *dev = &pdev->dev;
>>>>>> struct syscon *syscon;
>>>>>> - struct resource *res;
>>>>>> - void __iomem *base;
>>>>>> + int ret;
>>>>>> +
>>>>>> + if (np && np->data) {
>>>>>> + pr_debug("Early syscon was called\n");
>>>>>> + *syscon_p = (struct syscon *)&np->data;
>>>>>> + return 0;
>>>>>> + }
>>>>>>
>>>>>> - syscon = devm_kzalloc(dev, sizeof(*syscon), GFP_KERNEL);
>>>>>> + syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
>>>>>> if (!syscon)
>>>>>> return -ENOMEM;
>>>>>>
>>>>>> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>>> - if (!res)
>>>>>> - return -ENOENT;
>>>>>> + *syscon_p = (struct syscon *)&syscon;
>>>>>>
>>>>>> - base = devm_ioremap(dev, res->start, resource_size(res));
>>>>>> - if (!base)
>>>>>> - return -ENOMEM;
>>>>>> + if (!res && np) {
>>>>>> + if (of_address_to_resource(np, 0, &syscon->res)) {
>>>>>> + ret = -EINVAL;
>>>>>> + goto alloc;
>>>>>> + }
>>>>>> +
>>>>>> + np->data = syscon;
>>>>>> + of_node_put(np);
>>>>>> + } else {
>>>>>> + syscon->res = *res;
>>>>>> + }
>>>>>>
>>>>>> - syscon_regmap_config.max_register = res->end - res->start - 3;
>>>>>> - syscon->regmap = devm_regmap_init_mmio(dev, base,
>>>>>> - &syscon_regmap_config);
>>>>>> + syscon->base = ioremap(syscon->res.start, resource_size(&syscon->res));
>>>>>> + if (!syscon->base) {
>>>>>> + pr_err("%s: Unable to map I/O memory\n", __func__);
>>>>>> + ret = PTR_ERR(syscon->base);
>>>>>> + goto alloc;
>>>>>> + }
>>>>>> +
>>>>>> + syscon_regmap_config.max_register = syscon->res.end -
>>>>>> + syscon->res.start - 3;
>>>>>> + syscon->regmap = regmap_init_mmio(NULL, syscon->base,
>>>>>> + &syscon_regmap_config);
>>>>>> if (IS_ERR(syscon->regmap)) {
>>>>>> - dev_err(dev, "regmap init failed\n");
>>>>>> - return PTR_ERR(syscon->regmap);
>>>>>> + pr_err("regmap init failed\n");
>>>>>> + ret = PTR_ERR(syscon->regmap);
>>>>>> + goto iomap;
>>>>>> }
>>>>>> + if (np)
>>>>>> + pr_info("syscon: %s regmap %pR registered\n", np->name,
>>>>>> + &syscon->res);
>>>>>> +
>>>>>> + return 0;
>>>>>> +
>>>>>> +iomap:
>>>>>> + iounmap(syscon->base);
>>>>>> +alloc:
>>>>>> + kfree(syscon);
>>>>>> +
>>>>>> + return ret;
>>>>>> +}
>>>>>> +
>>>>>> +/**
>>>>>> + * early_syscon_init - Early system controller initialization
>>>>>> + */
>>>>>> +void __init early_syscon_init(void)
>>>>>> +{
>>>>>> + struct device_node *np;
>>>>>> + struct syscon *syscon = NULL;
>>>>>> +
>>>>>> + for_each_matching_node_and_match(np, of_syscon_match, NULL) {
>>>>>> + if (early_syscon_probe(np, &syscon, NULL))
>>>>>> + BUG();
>>>>>> + }
>>>>>> +}
>>>>>> +
>>>>>> +/**
>>>>>> + * syscon_probe - System controller probe method
>>>>>> + * @pdev: Platform device
>>>>>> + * Return: 0 if successful, a negative error code otherwise
>>>>>> + */
>>>>>> +static int syscon_probe(struct platform_device *pdev)
>>>>>> +{
>>>>>> + struct syscon *syscon, *syscon_p;
>>>>>> + struct resource *res = NULL;
>>>>>> + struct device *dev = &pdev->dev;
>>>>>> + struct device_node *np = pdev->dev.of_node;
>>>>>> + int ret;
>>>>>> +
>>>>>> + if (!np) {
>>>>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>>> + if (!res)
>>>>>> + return -ENOENT;
>>>>>> + }
>>>>>> + ret = early_syscon_probe(np, &syscon_p, res);
>>>>>> + if (ret) {
>>>>>> + dev_err(dev, "Syscon probe failed\n");
>>>>>> + return ret;
>>>>>> + }
>>>>>> +
>>>>>> + syscon = *(struct syscon **)syscon_p;
>>>>>> +
>>>>>> + regmap_attach_dev(dev, syscon->regmap, &syscon_regmap_config);
>>>>>>
>>>>>> platform_set_drvdata(pdev, syscon);
>>>>>>
>>>>>> - dev_info(dev, "regmap %pR registered\n", res);
>>>>>> + dev_info(dev, "regmap attach device to %pR\n", &syscon->res);
>>>>>>
>>>>>> return 0;
>>>>>> }
>>>>>> @@ -162,6 +271,21 @@ static const struct platform_device_id syscon_ids[] = {
>>>>>> { }
>>>>>> };
>>>>>>
>>>>>> +/**
>>>>>> + * syscon_remove - System controller cleanup function
>>>>>> + * @pdev: Platform device
>>>>>> + * Return: 0 always
>>>>>> + */
>>>>>> +static int syscon_remove(struct platform_device *pdev)
>>>>>> +{
>>>>>> + struct syscon *syscon = platform_get_drvdata(pdev);
>>>>>> +
>>>>>> + iounmap(syscon->base);
>>>>>> + kfree(syscon);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> static struct platform_driver syscon_driver = {
>>>>>> .driver = {
>>>>>> .name = "syscon",
>>>>>> @@ -169,6 +293,7 @@ static struct platform_driver syscon_driver = {
>>>>>> .of_match_table = of_syscon_match,
>>>>>> },
>>>>>> .probe = syscon_probe,
>>>>>> + .remove = syscon_remove,
>>>>>> .id_table = syscon_ids,
>>>>>> };
>>>>>>
>>>>>> diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
>>>>>> index 8789fa3..465c092 100644
>>>>>> --- a/include/linux/mfd/syscon.h
>>>>>> +++ b/include/linux/mfd/syscon.h
>>>>>> @@ -24,6 +24,10 @@ extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s);
>>>>>> extern struct regmap *syscon_regmap_lookup_by_phandle(
>>>>>> struct device_node *np,
>>>>>> const char *property);
>>>>>> +extern struct regmap *syscon_early_regmap_lookup_by_phandle(
>>>>>> + struct device_node *np,
>>>>>> + const char *property);
>>>>>> +extern void early_syscon_init(void);
>>>>>> #else
>>>>>> static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
>>>>>> {
>>>>>> @@ -46,6 +50,13 @@ static inline struct regmap *syscon_regmap_lookup_by_phandle(
>>>>>> {
>>>>>> return ERR_PTR(-ENOSYS);
>>>>>> }
>>>>>> +
>>>>>> +static struct regmap *syscon_early_regmap_lookup_by_phandle(
>>>>>> + struct device_node *np,
>>>>>> + const char *property)
>>>>>> +{
>>>>>> + return ERR_PTR(-ENOSYS);
>>>>>> +}
>>>>>> #endif
>>>>>>
>>>>>> #endif /* __LINUX_MFD_SYSCON_H__ */
>>>>>> --
>>>>>> 1.8.2.3
>>>>>>
>>>>> Thanks for CC'ing me.
>>>> no problem.
>>>>
>>>>> I have tested this patch along with Exynos PMU related changes posted here
>>>>> https://lkml.org/lkml/2014/4/2/53 and modified it for using Syscon, and it's working for me.
>>>> great.
>>>>
>>>>
>>>>> I have observed one issue during this testing:
>>>>>
>>>>> Even though we are saying early initialization I could not use "early_syscon_init" from machine's
>>>>> "map_io" or "init_early". I observed that "early_syscon_init" failed to called "early_syscon_probe",
>>>>> because it can not get any matching node, when I debug further I found that as "early_syscon_init"
>>>>> is calling "for_each_matching_node_and_match" and it can't work before unflatten'ing device tree,
>>>>> which happens in "setup_arch" a bit late, after "map_io" and "init_early" calls of machine.
>>>>>
>>>>> So if I have to use "early_syscon_init" I MUST call it after device tree is unflattened. It worked for me
>>>>> when I called it from "init_machine" (from exynos_dt_machine_init), But if someone needs it at very
>>>>> early stage then it might not work. So how about using "of_scan_flat_dt" in "early_syscon_init"?, so that
>>>>> we can use this functionality at very early stage if required.
>>>> Yes you are right. I have discussed this with Arnd and for Zynq there is no need to call it so early
>>>> that's why using this function is fine. Arnd wasn't sure if there is any need to call it before unflattening
>>>> that's why I didn't try to solve this case.
>>>>
>>>> Can you send me that patch? I will test it on Zynq and if it is working, let's include it to v4.
>>> Pankaj: Any update on this? I think that your patch can be applied on the top of this one.
>> Hi Michal,
>> Sorry for late reply, I was a bit busy with some official assignments.
>> Usage of "of_scan_flat_dt" in "early_syscon_init" was just a suggestion from my side, and I have
>> not worked on it till now. As I mentioned your patches worked for me if I call them a bit late in "init_machine".
>> I do not see as such any issues, until some one needs it before DT gets unflattened.
> ok great. Can you give me more formal response?
> Acked-by, Reviewed-by or Tested-by if you have time to test it?

Michal, I have tested your patch on Exynos5250, and it' working well.
But still I would like to point out there is one limitation as I mentioned
already we are not able to use
this very early during boot.

I have posted my patches based on this patch you can have a look here:
https://lkml.org/lkml/2014/4/25/252

You can see even though I have used early syscon API, but in one case where I
needed it before secondary
core boot I could not use it.

With this limitation if you would like to you can add my

Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>

>
> Thanks,
> Michal
>
>
>


--
Best Regards,
Pankaj Dubey



\
 
 \ /
  Last update: 2014-04-25 16:01    [W:0.165 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site