lkml.org 
[lkml]   [2014]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC 0/4] Migrate timers away from cpuset on setting cpuset.quiesce
From
On 24 April 2014 12:55, Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> wrote:
> I tried your set of patches for isolating particular CPU cores from unpinned
> timers. On x86_64 they were working fine, however I found out that on ARM
> they would fail under the following test:

I am happy that these drew attention from somebody Atleast :)

> # mount -t cpuset none /cpuset
> # cd /cpuset
> # mkdir rt
> # cd rt
> # echo 1 > cpus
> # echo 1 > cpu_exclusive
> # cd
> # taskset 0x2 ./setquiesce.sh <--- contains "echo 1 > /cpuset/rt/quiesce"
> [ 75.622375] ------------[ cut here ]------------
> [ 75.627258] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2595 __migrate_hrtimers+0x17c/0x1bc()
> [ 75.636840] DEBUG_LOCKS_WARN_ON(current->hardirq_context)
> [ 75.636840] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1-37710-g23c8f02 #1
> [ 75.649627] [<c0014d18>] (unwind_backtrace) from [<c00119e8>] (show_stack+0x10/0x14)
> [ 75.649627] [<c00119e8>] (show_stack) from [<c065b61c>] (dump_stack+0x78/0x94)
> [ 75.662689] [<c065b61c>] (dump_stack) from [<c003e9a4>] (warn_slowpath_common+0x60/0x84)
> [ 75.670410] [<c003e9a4>] (warn_slowpath_common) from [<c003ea24>] (warn_slowpath_fmt+0x30/0x40)
> [ 75.677673] [<c003ea24>] (warn_slowpath_fmt) from [<c005d7b0>] (__migrate_hrtimers+0x17c/0x1bc)
> [ 75.677673] [<c005d7b0>] (__migrate_hrtimers) from [<c009e004>] (generic_smp_call_function_single_interrupt+0x8c/0x104)
> [ 75.699645] [<c009e004>] (generic_smp_call_function_single_interrupt) from [<c00134d0>] (handle_IPI+0xa4/0x16c)
> [ 75.706970] [<c00134d0>] (handle_IPI) from [<c0008614>] (gic_handle_irq+0x54/0x5c)
> [ 75.715087] [<c0008614>] (gic_handle_irq) from [<c0012624>] (__irq_svc+0x44/0x5c)
> [ 75.725311] Exception stack(0xc08a3f58 to 0xc08a3fa0)

I couldn't understand why we went via a interrupt here ? Probably CPU1
was idle and was woken up with a IPI and then this happened. But in
that case too,
shouldn't the script run from process context instead ?

> I also backported your patches to Linux 3.10.y and found the same problem
> both in ARM and x86_64.

There are very few changes in between 3.10 and latest for timers/hrtimers
and so things are expected to be the same.

> However, I think I figured out the reason for those
> errors. Please, could you check the patch below (it applies on the top of
> your tree, branch isolate-cpusets) and let me know what you think?

Okay, just to let you know, I have also found some issues and they are
now pushed in my tree.. Also it is rebased over 3.15-rc2 now.

> -------------------------PATCH STARTS HERE---------------------------------
> cpuset: quiesce: change irq disable/enable by irq save/restore
>
> The function __migrate_timers can be called under interrupt context
> or thread context depending on the core where the system call was
> executed. In case it executes under interrupt context, it

How exactly?

> seems a bad idea to leave interrupts enabled after migrating the
> timers. In fact, this caused kernel errors on the ARM architecture and
> on the x86_64 architecture with the 3.10 kernel (backported version
> of the cpuset-quiesce patch).

I can't keep it as a separate patch and so would be required to merge
it into my original patch..

Thanks for your inputs :)


\
 
 \ /
  Last update: 2014-04-24 10:21    [W:0.160 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site