lkml.org 
[lkml]   [2014]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V2 05/19] bus: omap_l3_noc: switch over to relaxed variants of readl/writel
On 10:09-20140421, Felipe Balbi wrote:
> On Mon, Apr 21, 2014 at 08:16:28AM -0500, Nishanth Menon wrote:
> > On 04/17/2014 05:03 PM, Felipe Balbi wrote:
> > > On Thu, Apr 17, 2014 at 05:56:15PM -0400, Santosh Shilimkar wrote:
> > >> On Thursday 17 April 2014 05:52 PM, Felipe Balbi wrote:
> > >>> Hi,
> > >>>
> > >>> On Thu, Apr 17, 2014 at 03:49:21PM -0500, Nishanth Menon wrote:
> > >>>> Currently we use __raw_readl and writel in this driver, however, there
> > >>>
> > >>> __raw_* and *_relaxed variants are the same, just have a look <asm/io.h>
> > >>>
> > >> Except the relaxed version can take care of endian conversion if
> > >> needed. :-)
> > >
> > > right, but according to commit log, this commit is more concerned about
> > > the memory barriers which writel()/readl() add, not endianness. Just a
> > > matter of fixing up commit log.
> > >
> >
> > yep, this patch does replace writel with writel_relaxed there is no
> > strong need for barriers in the operations that we perform here.
> >
> > I agree that the commit message should probably be a little more
> > detailed at this point.
> >
> >
> > How about:
> > Currently we use __raw_readl and writel in this driver. Considering
> > there is no specific need for a memory barrier, replacing writel with
> > endian-neutral writel_relaxed and replacing __raw_readls with the
> > corresponding endian-neutral readl_relaxed allows us to have a
> > standard set of register operations for the driver.
> >
> > While at it, simplify address computation using variables for register.
>
> reads a lot better, thanks
>
> Acked-by: Felipe Balbi <balbi@ti.com>

Thanks.
Updated branch with patches with Acked-bys pickedup is available here:
https://github.com/nmenon/linux-2.6-playground/commits/l3noc/driver-fixes-v2-repost

I have dropped the empty commit while at it.

Updated patch below for the record:
------------------8<-----------------8<----------------------------
From a8198b8c78f2a2731fdd4df1ac540887a4c464be Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 11 Apr 2014 11:21:47 -0500
Subject: [PATCH V2 UPDATE 05/19] bus: omap_l3_noc: switch over to relaxed variants of
readl/writel

Currently we use __raw_readl and writel in this driver. Considering
there is no specific need for a memory barrier, replacing writel
with endian-neutral writel_relaxed and replacing __raw_readls with
the corresponding endian-neutral readl_relaxed allows us to have a
standard set of register operations for the driver.

While at it, simplify address computation using variables for
register.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
drivers/bus/omap_l3_noc.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 37d71b7..c8facb0 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -55,6 +55,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
int err_src = 0;
u32 std_err_main, err_reg, clear, masterid;
void __iomem *base, *l3_targ_base;
+ void __iomem *l3_targ_stderr, *l3_targ_slvofslsb, *l3_targ_mstaddr;
char *target_name, *master_name = "UN IDENTIFIED";

/* Get the Type of interrupt */
@@ -66,8 +67,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
* to determine the source
*/
base = l3->l3_base[i];
- err_reg = __raw_readl(base + l3_flagmux[i] +
- + L3_FLAGMUX_REGERR0 + (inttype << 3));
+ err_reg = readl_relaxed(base + l3_flagmux[i] +
+ L3_FLAGMUX_REGERR0 + (inttype << 3));

/* Get the corresponding error and analyse */
if (err_reg) {
@@ -76,10 +77,14 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)

/* Read the stderrlog_main_source from clk domain */
l3_targ_base = base + *(l3_targ[i] + err_src);
- std_err_main = __raw_readl(l3_targ_base +
- L3_TARG_STDERRLOG_MAIN);
- masterid = __raw_readl(l3_targ_base +
- L3_TARG_STDERRLOG_MSTADDR);
+ l3_targ_stderr = l3_targ_base + L3_TARG_STDERRLOG_MAIN;
+ l3_targ_slvofslsb = l3_targ_base +
+ L3_TARG_STDERRLOG_SLVOFSLSB;
+ l3_targ_mstaddr = l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR;
+
+ std_err_main = readl_relaxed(l3_targ_stderr);
+ masterid = readl_relaxed(l3_targ_mstaddr);

switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
@@ -87,12 +92,10 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
l3_targ_inst_name[i][err_src];
WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
target_name,
- __raw_readl(l3_targ_base +
- L3_TARG_STDERRLOG_SLVOFSLSB));
+ readl_relaxed(l3_targ_slvofslsb));
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, l3_targ_base +
- L3_TARG_STDERRLOG_MAIN);
+ writel_relaxed(clear, l3_targ_stderr);
break;

case CUSTOM_ERROR:
@@ -107,8 +110,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, l3_targ_base +
- L3_TARG_STDERRLOG_MAIN);
+ writel_relaxed(clear, l3_targ_stderr);
break;

default:
--
1.7.9.5



--
Regards,
Nishanth Menon


\
 
 \ /
  Last update: 2014-04-21 18:21    [W:1.321 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site