lkml.org 
[lkml]   [2014]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/8] ARM: at91: sama5d3: enable sound support
On 17/03/2014 10:45, Bo Shen :
> This patch add sound support on sama5d3xek board.
>
> This patch series based on the following patch set:
> clk: at91: better support for the PCKs
> http://comments.gmane.org/gmane.linux.kernel/1664477
>
>
> Bo Shen (5):
> ARM: at91: sama5d3: add DMA property for SSC devices
> ARM: at91: sama5d3: disable sound by default
> ARM: at91: sama5d3: correct the sound compatible string
> ARM: at91: sama5d3: add the missing property
> ARM: at91: sama5d3: clock for ssc from rk pin
>
> Boris BREZILLON (3):
> ASoC: atmel: support CCF based clks
> ASoC: atmel: document clock properties of the wm8904 driver
> ARM: at91/dt: add clock properties to the wm8904 codec node

Hi Voice and Boris,

For this series I am a little bit puzzled: should I take the ASoC part
of it? I see no acknowledgement from Mark and I also read some messages
still discussing about CCF and wm8904 afterwards.

So, I take the 5 patches by Voice Shen and tell me what is the proper
sequence with this wm8904 work.

I will be happy to stack more patches about this topic during the 3.16
development phase.


Otherwise, the 5 patches by Voice go into at91-3.16-dt branch.

Thanks, bye.


> .../devicetree/bindings/sound/atmel-wm8904.txt | 2 ++
> arch/arm/boot/dts/sama5d3.dtsi | 6 ++++++
> arch/arm/boot/dts/sama5d3xmb.dtsi | 11 +++++++++-
> sound/soc/atmel/atmel_wm8904.c | 25 +++++++++++-----------
> 4 files changed, 31 insertions(+), 13 deletions(-)
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2014-04-18 22:41    [W:0.182 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site