lkml.org 
[lkml]   [2014]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] spi/pxa2xx-pci: Add PCI mode support for BayTrail LPSS SPI
Date
From: Chew, Chiau Ee <chiau.ee.chew@intel.com>

Similar to CE4100, BayTrail LPSS SPI can be PCI enumerated
as well. Thus, the functions are renamed from ce4100_xxx
to pxa2xx_spi_pci_xxx to clarify that this is a generic
PCI glue layer. Also, added required infrastructure to
support SPI hosts with different configurations.

This patch is based on Mika Westerberg's previous work.

Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
---
drivers/spi/spi-pxa2xx-pci.c | 76 +++++++++++++++++++++++++++++++++--------
1 files changed, 61 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 3f006d3..c1865c9 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -8,7 +8,43 @@
#include <linux/module.h>
#include <linux/spi/pxa2xx_spi.h>

-static int ce4100_spi_probe(struct pci_dev *dev,
+enum {
+ PORT_CE4100,
+ PORT_BYT,
+};
+
+struct pxa_spi_info {
+ enum pxa_ssp_type type;
+ int port_id;
+ int num_chipselect;
+ int tx_slave_id;
+ int tx_chan_id;
+ int rx_slave_id;
+ int rx_chan_id;
+};
+
+static struct pxa_spi_info spi_info_configs[] = {
+ [PORT_CE4100] = {
+ .type = PXA25x_SSP,
+ .port_id = -1,
+ .num_chipselect = -1,
+ .tx_slave_id = -1,
+ .tx_chan_id = -1,
+ .rx_slave_id = -1,
+ .rx_chan_id = -1,
+ },
+ [PORT_BYT] = {
+ .type = LPSS_SSP,
+ .port_id = 0,
+ .num_chipselect = 1,
+ .tx_slave_id = 0,
+ .tx_chan_id = 0,
+ .rx_slave_id = 1,
+ .rx_chan_id = 1,
+ },
+};
+
+static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
struct platform_device_info pi;
@@ -16,6 +52,7 @@ static int ce4100_spi_probe(struct pci_dev *dev,
struct platform_device *pdev;
struct pxa2xx_spi_master spi_pdata;
struct ssp_device *ssp;
+ struct pxa_spi_info *c;

ret = pcim_enable_device(dev);
if (ret)
@@ -25,8 +62,16 @@ static int ce4100_spi_probe(struct pci_dev *dev,
if (ret)
return ret;

+ c = &spi_info_configs[ent->driver_data];
+
memset(&spi_pdata, 0, sizeof(spi_pdata));
- spi_pdata.num_chipselect = dev->devfn;
+ spi_pdata.num_chipselect = (c->num_chipselect > 0) ?
+ c->num_chipselect : dev->devfn;
+ spi_pdata.tx_slave_id = c->tx_slave_id;
+ spi_pdata.tx_chan_id = c->tx_chan_id;
+ spi_pdata.rx_slave_id = c->rx_slave_id;
+ spi_pdata.rx_chan_id = c->rx_chan_id;
+ spi_pdata.enable_dma = c->rx_slave_id >= 0 && c->tx_slave_id >= 0;

ssp = &spi_pdata.ssp;
ssp->phys_base = pci_resource_start(dev, 0);
@@ -36,8 +81,8 @@ static int ce4100_spi_probe(struct pci_dev *dev,
return -EIO;
}
ssp->irq = dev->irq;
- ssp->port_id = dev->devfn;
- ssp->type = PXA25x_SSP;
+ ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn;
+ ssp->type = c->type;

memset(&pi, 0, sizeof(pi));
pi.parent = &dev->dev;
@@ -55,28 +100,29 @@ static int ce4100_spi_probe(struct pci_dev *dev,
return 0;
}

-static void ce4100_spi_remove(struct pci_dev *dev)
+static void pxa2xx_spi_pci_remove(struct pci_dev *dev)
{
struct platform_device *pdev = pci_get_drvdata(dev);

platform_device_unregister(pdev);
}

-static const struct pci_device_id ce4100_spi_devices[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) },
+static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
+ { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT },
{ },
};
-MODULE_DEVICE_TABLE(pci, ce4100_spi_devices);
+MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices);

-static struct pci_driver ce4100_spi_driver = {
- .name = "ce4100_spi",
- .id_table = ce4100_spi_devices,
- .probe = ce4100_spi_probe,
- .remove = ce4100_spi_remove,
+static struct pci_driver pxa2xx_spi_pci_driver = {
+ .name = "pxa2xx_spi_pci",
+ .id_table = pxa2xx_spi_pci_devices,
+ .probe = pxa2xx_spi_pci_probe,
+ .remove = pxa2xx_spi_pci_remove,
};

-module_pci_driver(ce4100_spi_driver);
+module_pci_driver(pxa2xx_spi_pci_driver);

-MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver");
+MODULE_DESCRIPTION("CE4100/LPSS PCI-SPI glue code for PXA's driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
--
1.7.4.4


\
 
 \ /
  Last update: 2014-04-18 04:21    [W:0.299 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site