lkml.org 
[lkml]   [2014]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
Date
The cros_ec_spi transfer had two problems with its timeout code:

1. It looked at the timeout even in the case that it found valid data.
2. If the cros_ec_spi code got switched out for a while, it's possible
it could get a timeout after a single loop. Let's be paranoid and
make sure we do one last transfer after the timeout expires.

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
drivers/mfd/cros_ec_spi.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index a2a605d..4f863c3 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -113,7 +113,9 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,

/* Receive data until we see the header byte */
deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
- do {
+ while (true) {
+ unsigned long start_jiffies = jiffies;
+
memset(&trans, 0, sizeof(trans));
trans.cs_change = 1;
trans.rx_buf = ptr = ec_dev->din;
@@ -134,12 +136,19 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
break;
}
}
+ if (ptr != end)
+ break;

- if (time_after(jiffies, deadline)) {
+ /*
+ * Use the time at the start of the loop as a timeout. This
+ * gives us one last shot at getting the transfer and is useful
+ * in case we got context switched out for a while.
+ */
+ if (time_after(start_jiffies, deadline)) {
dev_warn(ec_dev->dev, "EC failed to respond in time\n");
return -ETIMEDOUT;
}
- } while (ptr == end);
+ }

/*
* ptr now points to the header byte. Copy any valid data to the
--
1.9.1.423.g4596e3a


\
 
 \ /
  Last update: 2014-04-17 20:41    [W:0.112 / U:1.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site