lkml.org 
[lkml]   [2014]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: mm: support big-endian page tables
On 16/04/14 03:45, Jianguo Wu wrote:
> On 2014/4/14 19:14, Marc Zyngier wrote:
>
>> On 14/04/14 11:43, Will Deacon wrote:
>>> (catching up on old email)
>>>
>>> On Tue, Mar 18, 2014 at 07:35:59AM +0000, Jianguo Wu wrote:
>>>> Cloud you please take a look at this?
>>>
>>> [...]
>>>
>>>> On 2014/2/17 15:05, Jianguo Wu wrote:
>>>>> When enable LPAE and big-endian in a hisilicon board, while specify
>>>>> mem=384M mem=512M@7680M, will get bad page state:
>>>>>
>>>>> Freeing unused kernel memory: 180K (c0466000 - c0493000)
>>>>> BUG: Bad page state in process init pfn:fa442
>>>>> page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0
>>>>> page flags: 0x40000400(reserved)
>>>>> Modules linked in:
>>>>> CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66
>>>>> [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14)
>>>>> [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104)
>>>>> [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c)
>>>>> [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0)
>>>>> [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8)
>>>>> [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120)
>>>>> [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354)
>>>>> [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90)
>>>>> [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40)
>>>
>>> [...]
>>>
>>>>> The bug is happened in cpu_v7_set_pte_ext(ptep, pte):
>>>>> when pte is 64-bit, for little-endian, will store low 32-bit in r2,
>>>>> high 32-bit in r3; for big-endian, will store low 32-bit in r3,
>>>>> high 32-bit in r2, this will cause wrong pfn stored in pte,
>>>>> so we should exchange r2 and r3 for big-endian.
>>>
>
> Hi Marc,
> How about this:
>
> The bug is happened in cpu_v7_set_pte_ext(ptep, pte):
> - It tests the L_PTE_NONE in one word on the other, and possibly clear L_PTE_VALID
> tst r3, #1 << (57 - 32) @ L_PTE_NONE
> bicne r2, #L_PTE_VALID
> - Same for L_PTE_DIRTY, respectively setting L_PTE_RDONLY
>
> As for LPAE, the pte is 64-bits, and the value of r2/r3 is depending on the endianness,
> for little-endian, will store low 32-bit in r2, high 32-bit in r3,
> for big-endian, will store low 32-bit in r3, high 32-bit in r2,
> this will cause wrong bit is cleared or set, and get wrong pfn.
> So we should exchange r2 and r3 for big-endian.

May I suggest the following instead:

"An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the
r2 and r3 registers.
On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB.
On a BE kernel, the assignment is reversed.

Unfortunately, the current code always assumes the LE case,
leading to corruption of the PTE when clearing/setting bits.

This patch fixes this issue much like it has been done already in the
cpu_v7_switch_mm case."

Cheers,

M.
--
Jazz is not dead. It just smells funny...


\
 
 \ /
  Last update: 2014-04-16 15:01    [W:0.070 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site