lkml.org 
[lkml]   [2014]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Missing USB XHCI and EHCI reset for kexec
From
Date
Am Dienstag, den 15.04.2014, 15:14 -0400 schrieb Alan Stern:
> On Tue, 15 Apr 2014, Stefani Seibold wrote:
>
> > > > usbcore: registered new interface driver USB-SATA-storage
> > > > USB SATA Mass Storage support registered.
> > > > usb 1-4: new high-speed USB device number 4 using ehci-pci
> > > > xxxx: ports detected
> > >
> > > What driver is this? I've never heard of USB-SATA-storage.
> > >
> >
> > This is a special embedded USB SATA driver written by me. It is mostly a
> > fork of the usb-storage driver but handle only one vendor and product ID
> > and does switch on a port bit. On the other side this vendor and product
> > ID is black listed in the regular usb-storage driver.
>
> Is it possible that your driver leaves the device in a strange state
> where it won't initialize properly?
>

I don't think so, because the driver was not used in this test due a
missing harddisk. But i will do a test tomorrow in the office.

- Stefani





\
 
 \ /
  Last update: 2014-04-16 02:01    [W:0.112 / U:3.076 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site