lkml.org 
[lkml]   [2014]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 12/14] pci: Suspend/resume support for appel thunderbolt
On Tue, Apr 15, 2014 at 7:37 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> [+cc Rafael]
>
> On Fri, Apr 11, 2014 at 02:24:59AM +0200, Andreas Noever wrote:
>> This patch makes changes to the pcieport driver to support thunderbolt
>> suspend/resume on apple systems. We need to perform two different
>> actions during suspend and resume:
>>
>> The whole controller has to be powered down before suspend. If this is
>> not done then the NHI device will be gone after resume if a thunderbolt
>> device was plugged in while suspending. The controller represents itself
>> as multiple PCI devices/bridges. To power it down we hook into the
>> upstream bridge of the controller and call the magic ACPI methods. Power
>> will be restored automatically during resume (by the firmware
>> presumably).
>>
>> During resume we have to wait for the NHI do reestablish all pci
>> tunnels. Since there is no parent-child relationship between the NHI
>> and the bridges we have to explicitly wait for them using
>> device_pm_wait_for_dev. We do this in the resume_noirq phase of the
>> downstream bridges of the controller (which lead into the thunderbolt
>> tunnels).
>>
>> Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
>> ---
>> drivers/pci/pcie/portdrv_pci.c | 117 +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 117 insertions(+)
>>
>> diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
>> index 0d8fdc4..6d33666 100644
>> --- a/drivers/pci/pcie/portdrv_pci.c
>> +++ b/drivers/pci/pcie/portdrv_pci.c
>> @@ -17,6 +17,9 @@
>> #include <linux/aer.h>
>> #include <linux/dmi.h>
>> #include <linux/pci-aspm.h>
>> +#include <linux/delay.h>
>> +#include <linux/dmi.h>
>> +#include <linux/acpi.h>
>>
>> #include "portdrv.h"
>> #include "aer/aerdrv.h"
>> @@ -79,6 +82,114 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev)
>> }
>>
>> #ifdef CONFIG_PM
>> +
>> +#if defined(CONFIG_THUNDERBOLT) || defined(CONFIG_THUNDERBOLT_MODULE)
>> +
>> +bool is_thunderbolt(struct pci_dev *pdev)
>> +{
>> + if (!dmi_match(DMI_PRODUCT_NAME, "MacBookPro10,1"))
>> + return false;
>> + return pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x1547;
>> +}
>> +
>> +static void shutdown_thunderbolt_controller(struct pci_dev *pdev)
>> +{
>> + /*
>> + * The thunderbolt controller consists of a pcie switch with downstream
>> + * bridges leading to the NHI (native host interface) and to the tunnel
>> + * pci bridges.
>> + *
>> + * Without the following quirk the NHI will not resume if a tb device was
>> + * plugged in before suspend.
>> + *
>> + * This quirk cuts power to the whole chip. Therefore we have to apply it
>> + * during suspend_noirq of the upstream bridge.
>> + *
>> + * Power is automagically restored before resume. No action is needed.
>> + */
>> + acpi_handle bridge, SXIO, SXFP, SXLV;
>> + if (!is_thunderbolt(pdev))
>> + return;
>> + if (pci_pcie_type(pdev) != PCI_EXP_TYPE_UPSTREAM)
>> + return;
>> + bridge = ACPI_HANDLE(&pdev->dev);
>> + if (!bridge)
>> + return;
>> + /*
>> + * TB bridges in external devices might have the same device id as those
>> + * on the host, but they will not have the associated ACPI methods. This
>> + * implicitly checks that we are at the right bridge.
>> + */
>> + if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO))
>> + || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP))
>> + || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV)))
>> + return;
>
> Hmm, this is pretty ugly because the ACPI names are up to the BIOS writer
> so we can't really rely on them.
These methods just write to the ACPI GPIO area. I guess I could do the
same directly and hardcode the pins, but that would tie it to the
specific MacBook model (different models use different GPIOs, the
MacPro even has 3 controllers, all using diferent GPIOs). The Apple
driver uses these methods as well, so I think that we can assume that
they are stable. Worst case is that they go away and the device will
not resume (which is what happens now).

There is also an XRPE method (TRPE on newer machine) which is used for
runtime power management (setting up out of band hp notifications,
power on/off and pcie link retraining). That one is much more complex
and I would rather not replicate that code (If I get to the point
where I want to implement runtime power management for the
controller).


> You could put this sort of thing in a quirk, but I wouldn't be happy
> about putting it in a generic place like this. Same with the magic
> sequence below.
>
> Maybe a quirk that sets function pointers that we could call here?
Hm, I did not realize that there where resume/suspend pci quirks. I
just checked and which point they are called and at least for resume
we are fine. pci_fixup_resume_early gets called just before the
dev->pm->resume_noirq callback. But there seems to be no corresponding
fixup phase for suspend_late/poweroff_late? I have to check again
whether poweroff_late is even necessary. Can we add a quirks section
for suspend_late?


>> + dev_info(&pdev->dev, "cutting power to thunderbolt controller...\n");
>> +
>> + /* save registers manually, the pci core won't be able to do later */
>> + pci_save_state(pdev);
>> + pci_prepare_to_sleep(pdev);
>> +
>> + /* magic sequence */
>> + acpi_execute_simple_method(SXIO, NULL, 1);
>> + acpi_execute_simple_method(SXFP, NULL, 0);
>> + msleep(300);
>> + acpi_execute_simple_method(SXLV, NULL, 0);
>> + acpi_execute_simple_method(SXIO, NULL, 0);
>> + acpi_execute_simple_method(SXLV, NULL, 0);
>> +}
>> +
>> +static void wait_for_thunderbolt_controller(struct pci_dev *pdev)
>> +{
>> + struct pci_dev *sibling = NULL;
>> + struct pci_dev *nhi = NULL;
>> + /*
>> + * During suspend the thunderbolt controller is reset and all pci
>> + * tunnels are lost. The NHI driver will try to reestablish all tunnels
>> + * during resume. We have to manually wait for the NHI since there is
>> + * no parent child relationship between the NHI and the tunneled
>> + * bridges.
>> + */
>> + if (!is_thunderbolt(pdev))
>> + return;
>> + if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
>> + return;
>> + /*
>> + * Find the NHI and confirm that we are a bridge on the tb host
>> + * controller and not on a tb endpoint.
>> + */
>> + sibling = pci_get_slot(pdev->bus, 0x0);
>> + if (sibling == pdev)
>> + goto out; /* we are the downstream bridge to the NHI */
>> + if (!sibling || !sibling->subordinate)
>> + goto out;
>> + nhi = pci_get_slot(sibling->subordinate, 0x0);
>> + if (!nhi)
>> + goto out;
>> + if (nhi->vendor != PCI_VENDOR_ID_INTEL || nhi->device != 0x1547
>> + || nhi->subsystem_vendor != 0x2222
>> + || nhi->subsystem_device != 0x1111)
>> + goto out;
>> + dev_info(&pdev->dev, "wating for thunderbolt to reestablish pci tunnels...\n");
>> + device_pm_wait_for_dev(&pdev->dev, &nhi->dev);
>> +out:
>> + pci_dev_put(sibling);
>> + pci_dev_put(nhi);
>> +}
>> +
>> +#else
>> +
>> +static void shutdown_thunderbolt_controller(struct pci_dev *pdev) { }
>> +static void wait_for_thunderbolt_controller(struct pci_dev *pdev) { }
>> +
>> +#endif
>> +
>> +int pcie_port_suspend_noirq(struct device *dev)
>> +{
>> + shutdown_thunderbolt_controller(to_pci_dev(dev));
>> + return 0;
>> +}
>> +
>> static int pcie_port_resume_noirq(struct device *dev)
>> {
>> struct pci_dev *pdev = to_pci_dev(dev);
>> @@ -90,6 +201,9 @@ static int pcie_port_resume_noirq(struct device *dev)
>> */
>> if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
>> pcie_clear_root_pme_status(pdev);
>> +
>> + wait_for_thunderbolt_controller(pdev);
>> +
>> return 0;
>> }
>>
>> @@ -171,7 +285,10 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
>> .thaw = pcie_port_device_resume,
>> .poweroff = pcie_port_device_suspend,
>> .restore = pcie_port_device_resume,
>> + .suspend_noirq = pcie_port_suspend_noirq,
>> .resume_noirq = pcie_port_resume_noirq,
>> + .poweroff_noirq = pcie_port_suspend_noirq,
>> + .restore_noirq = pcie_port_resume_noirq,
>> .runtime_suspend = pcie_port_runtime_suspend,
>> .runtime_resume = pcie_port_runtime_resume,
>> .runtime_idle = pcie_port_runtime_idle,
>> --
>> 1.9.2
>>


\
 
 \ /
  Last update: 2014-04-16 02:01    [W:0.066 / U:4.452 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site