lkml.org 
[lkml]   [2014]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/4] mmc: sdhci: defer probing on regulator_get_optional() failures
From
On Tue, Apr 15, 2014 at 11:28 AM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> On 04/14/2014 07:42 PM, Andrew Bresticker wrote:
>> If regulator_get_optional() returns EPROBE_DEFER, it indicates
>> that the regulator may show up later (e.g. the DT property is
>> present but the corresponding regulator may not have probed).
>> Instead of continuing without the regulator, return EPROBE_DEFER
>> from sdhci_add_host(). Also, fix regulator leaks in the error
>> paths in sdhci_add_host().
>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>
>> if (IS_ERR_OR_NULL(host->vqmmc)) {
>
> This is a pre-existing condition, but ick: Why doesn't this test either
> IS_ERR() /or/ == NULL, but not both. On error, the regulator API should
> either return and error-point or return NULL, so that client code
> shouldn't need to check for both.

Unfortunately, this is necessary. regulator_get() returns NULL if
!CONFIG_REGULATOR and we do not want to call
regulator_is_supported_voltage() in this case since it will always
return false, causing sdhci_add_host() to disable UHS modes.
Alternatively, we could put the regulator_is_supported_voltage() check
wihin an #ifdef CONFIG_REGULATOR, as is done when checking supported
vmmc voltages below.

>
>> +put_vmmc:
>> + if (host->vmmc)
>> + regulator_put(host->vmmc);
>> +put_vqmmc:
>> + if (host->vqmmc)
>> + regulator_put(host->vqmmc);
>
> If IS_ERR_OR_NULL() really is required above, it should be used here
> too. More likely, I hope you need to replace if (host->vmmc) with if
> (!IS_ERR(host->vmmc)).

host->vmmc and host->vqmmc are set to NULL in the case of IS_ERR(), so
the IS_ERR() check here isn't necessary.

>
> I wonder if fixing this would help solve the crashes that Alex saw?

I believe the crash Alex is seeing is due to a race between tearing
down the sdhci driver on probe deferral and the card-detect IRQ.
Looking at it now.


\
 
 \ /
  Last update: 2014-04-15 22:21    [W:0.074 / U:45.996 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site