lkml.org 
[lkml]   [2014]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv3 08/15] ARM: at91: sam9rl: add at91_adc to support adc and touchscreen
Date
The ADC clock needs to be defined to enable the at91_adc driver. It is defined
to the same speed that is used for atmel_tsadcc.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/at91sam9rl.c | 7 +++
arch/arm/mach-at91/at91sam9rl_devices.c | 85 +++++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 57f12d86c0e6..a79960f57e6a 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -153,6 +153,11 @@ static struct clk ac97_clk = {
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk adc_op_clk = {
+ .name = "adc_op_clk",
+ .type = CLK_TYPE_PERIPHERAL,
+ .rate_hz = 1000000,
+};

static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
@@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = {
&udphs_clk,
&lcdc_clk,
&ac97_clk,
+ &adc_op_clk,
// irq0
};

@@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
+ CLKDEV_CON_ID("adc_clk", &tsc_clk),
};

static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 428fc412aaf1..5731633bca33 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -23,6 +23,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/at91_adc.h>

#include "board.h"
#include "generic.h"
@@ -657,6 +658,90 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
#endif

+/* --------------------------------------------------------------------
+ * ADC and Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_TSC,
+ .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
+ .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device at91_adc_device = {
+ .name = "at91sam9rl-adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
+ },
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+};
+
+static struct at91_adc_trigger at91_adc_triggers[] = {
+ [0] = {
+ .name = "external-rising",
+ .value = 1,
+ .is_external = true,
+ },
+ [1] = {
+ .name = "external-falling",
+ .value = 2,
+ .is_external = true,
+ },
+ [2] = {
+ .name = "external-any",
+ .value = 3,
+ .is_external = true,
+ },
+ [3] = {
+ .name = "continuous",
+ .value = 6,
+ .is_external = false,
+ },
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+ if (!data)
+ return;
+
+ if (test_bit(0, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA17, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA18, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA19, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA20, 0);
+ if (test_bit(4, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PD6, 0);
+ if (test_bit(5, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PD7, 0);
+
+ if (data->use_external_triggers)
+ at91_set_A_periph(AT91_PIN_PB15, 0);
+
+ data->startup_time = 40;
+ data->trigger_number = 4;
+ data->trigger_list = at91_adc_triggers;
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif

/* --------------------------------------------------------------------
* RTC
--
1.8.3.2


\
 
 \ /
  Last update: 2014-04-15 15:41    [W:1.045 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site