lkml.org 
[lkml]   [2014]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv3 02/15] ARM: at91: sam9260: remove unused platform_data
Date
num_channels and registers are not used anymore since they are defined inside
the at91_adc driver and assigned by matching the id_table.

Also, remove the mach/at91_adc.h include that is not necessary anymore.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
---
arch/arm/mach-at91/at91sam9260_devices.c | 10 ----------
1 file changed, 10 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index a0282928e9c1..fffcd09ac878 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -24,7 +24,6 @@
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_adc.h>
#include <mach/hardware.h>

#include "board.h"
@@ -1325,13 +1324,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
},
};

-static struct at91_adc_reg_desc at91_adc_register_g20 = {
- .channel_base = AT91_ADC_CHR(0),
- .drdy_mask = AT91_ADC_DRDY,
- .status_register = AT91_ADC_SR,
- .trigger_register = AT91_ADC_MR,
-};
-
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
@@ -1349,9 +1341,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PA22, 0);

- data->num_channels = 4;
data->startup_time = 10;
- data->registers = &at91_adc_register_g20;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;

--
1.8.3.2


\
 
 \ /
  Last update: 2014-04-15 14:41    [W:0.091 / U:0.084 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site