lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Missing USB XHCI and EHCI reset for kexec
On Mon, 14 Apr 2014, Stefani Seibold wrote:

> > > An other PowerPC device which is nearly eactly the same HW but without
> > > this USB HUB works perfectly.
> >
> > Maybe you should replace that hub with a different brand.
> >
>
> Thats not possible, because the Hub is soldered on the board. And it is
> also not a HW issue, since the Hub works perfectly which all previous
> kernels including 3.4.

One other thing you can try is to increase the reset timeout in
drivers/usb/host/ehci-hub.c. This is under the USB_PORT_FEAT_RESET
case in ehci_hub_control(), around line 1225:

/*
* caller must wait, then call GetPortStatus
* usb 2.0 spec says 50 ms resets on root
*/
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (50);

Increasing the 50 to 100 or more might help.

Alan Stern



\
 
 \ /
  Last update: 2014-04-16 09:01    [W:0.116 / U:40.044 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site