lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] ipmi: Turn off default probing of interfaces
Date
From: Corey Minyard <cminyard@mvista.com>

The default probing can cause problems with some system, slow booting,
extra CPU usages, etc. Turn it off by default and give a config option
to enable it.

From: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
drivers/char/ipmi/Kconfig | 12 ++++++++++++
drivers/char/ipmi/ipmi_si_intf.c | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index 0baa8fa..db1c9b7 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -50,6 +50,18 @@ config IPMI_SI
Currently, only KCS and SMIC are supported. If
you are using IPMI, you should probably say "y" here.

+config IPMI_SI_PROBE_DEFAULTS
+ bool 'Probe for all possible IPMI system interfaces by default'
+ default n
+ depends on IPMI_SI
+ help
+ Modern systems will usually expose IPMI interfaces via a discoverable
+ firmware mechanism such as ACPI or DMI. Older systems do not, and so
+ the driver is forced to probe hardware manually. This may cause boot
+ delays. Say "n" here to disable this manual probing. IPMI will then
+ only be available on older systems if the "ipmi_si_intf.trydefaults=1"
+ boot argument is passed.
+
config IPMI_WATCHDOG
tristate 'IPMI Watchdog Timer'
help
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 9c40691..25a1436 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1239,7 +1239,7 @@ static bool si_tryplatform = 1;
#ifdef CONFIG_PCI
static bool si_trypci = 1;
#endif
-static bool si_trydefaults = 1;
+static bool si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
static char si_type_str[MAX_SI_TYPE_STR];
--
1.8.3.1


\
 
 \ /
  Last update: 2014-04-14 17:21    [W:0.057 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site