lkml.org 
[lkml]   [2014]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND 2/5] pinctrl: berlin: add a pinctrl driver for Marvell Berlin SoCs
On 04/10/2014 03:07 PM, Antoine Ténart wrote:
> The Marvell Berlin boards have a group based pinmuxing mechanism. This
> driver adds the support for the BG2CD, BG2 and BG2Q. We actually do not
> need any information about the pins here and only have the definition
> of the groups.

Antoine,

as always, thanks for providing this :)

> Let's take the example of the uart0 pinmuxing on the BG2Q. Balls BK4 and
> BH6 are muxed to respectively UART0 RX and TX if the group GSM12 is set
> to mode 0:
>
> Group Modes Offset Base Offset LSB Bit Width
> GSM12 3 sm_base 0x40 0x10 0x2
>
> Ball Group Mode 0 Mode 1 Mode 2
> BK4 GSM12 UART0_RX IrDA0_RX GPIO9
> BH6 GSM12 UART0_TX IrDA0_TX GPIO10

Actually, I consider above mode table a very vital information
that is missing from the driver below. Especially, I expect bg2 and
bg2cd different in some modes and there is no way to look it up.

It doesn't matter if we know all mode names now, but we should
have a placeholder at least.

Also, I know gpio<>pingroup relationship is very broken by design
on berlin, but how are you planing to exploit that information?
We will have some straight numbered gpios and need to determine
what pingroup has to be switched.

> So in order to configure BK4 -> UART0_TX and BH6 -> UART0_RX, we need
> to set (sm_base + 0x40 + 0x10) &= ff3fffff.
>
> Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
> ---
> drivers/pinctrl/Kconfig | 4 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/pinctrl-berlin.c | 498 +++++++++++++++++++++++++++++++++++++++
> drivers/pinctrl/pinctrl-berlin.h | 72 ++++++
> 4 files changed, 575 insertions(+)
> create mode 100644 drivers/pinctrl/pinctrl-berlin.c
> create mode 100644 drivers/pinctrl/pinctrl-berlin.h
>
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index e49324032611..2d9339a7bd05 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -104,6 +104,10 @@ config PINCTRL_BCM2835
> select PINMUX
> select PINCONF
>
> +config PINCTRL_BERLIN
> + bool
> + select PINMUX

select PINCTRL too and drop it from the individual SoC configs
later on.

> config PINCTRL_CAPRI
> bool "Broadcom Capri pinctrl driver"
> depends on OF
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index 4b835880cf80..fd5a01d4475f 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
> obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
> obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
> obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o
> +obj-$(CONFIG_PINCTRL_BERLIN) += pinctrl-berlin.o

Please split the driver into common and soc-specific parts, and if
you do please put it into a subfolder berlin, too.

> obj-$(CONFIG_PINCTRL_CAPRI) += pinctrl-capri.o
> obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
> obj-$(CONFIG_PINCTRL_IMX1_CORE) += pinctrl-imx1-core.o
> diff --git a/drivers/pinctrl/pinctrl-berlin.c b/drivers/pinctrl/pinctrl-berlin.c
> new file mode 100644
> index 000000000000..a377d6fbb127
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-berlin.c
> @@ -0,0 +1,498 @@
> +/*
> + * Marvell Berlin SoC pinctrl driver.
> + *
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Ténart <antoine.tenart@free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "core.h"
> +#include "pinctrl-utils.h"
> +#include "pinctrl-berlin.h"
> +
> +#define NFCTS(bit_width) (1 << ((bit_width) + 1))

Number-of-FunCTionS ? You use that define twice, but maybe it is
more clear to write it out where you use it. Otherwise it is
kind of hard to get the idea.

> +static const struct berlin_desc_group berlin2cd_pinctrl_groups[] = {

First SoC in bg2 and bg2cd is possibly bg2. Use that one for the
names please.

> + /* GSM */
> + BERLIN_PINCTRL_GROUP("GSM0", "apb_base", 0x40, 0x2, 0x00),

I'd love to see the mode/function tables in here.

> + BERLIN_PINCTRL_GROUP("GSM1", "apb_base", 0x40, 0x2, 0x02),
> + BERLIN_PINCTRL_GROUP("GSM2", "apb_base", 0x40, 0x2, 0x04),
> + BERLIN_PINCTRL_GROUP("GSM3", "apb_base", 0x40, 0x2, 0x06),
> + BERLIN_PINCTRL_GROUP("GSM4", "apb_base", 0x40, 0x2, 0x08),
> + BERLIN_PINCTRL_GROUP("GSM5", "apb_base", 0x40, 0x2, 0x0a),
> + BERLIN_PINCTRL_GROUP("GSM6", "apb_base", 0x40, 0x2, 0x0c),
> + BERLIN_PINCTRL_GROUP("GSM7", "apb_base", 0x40, 0x1, 0x0e),
> + BERLIN_PINCTRL_GROUP("GSM8", "apb_base", 0x40, 0x1, 0x0f),
> + BERLIN_PINCTRL_GROUP("GSM9", "apb_base", 0x40, 0x1, 0x10),
> + BERLIN_PINCTRL_GROUP("GSM10", "apb_base", 0x40, 0x1, 0x11),
> + BERLIN_PINCTRL_GROUP("GSM11", "apb_base", 0x40, 0x1, 0x12),
[...]
> +static int berlin_pinctrl_get_group_count(struct pinctrl_dev *pctrl_dev)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> + return pctrl->ngroups;
> +}
> +
> +static const char *berlin_pinctrl_get_group_name(struct pinctrl_dev *pctrl_dev,
> + unsigned group)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> + return pctrl->groups[group].name;
> +}
> +
> +static int berlin_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrl_dev,
> + struct device_node *node,
> + struct pinctrl_map **map,
> + unsigned *num_maps)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> + const char *group_name;
> + char *function_name;
> + unsigned reserved_maps = 0;
> + u32 function;
> + int ret;
> +
> + *map = NULL;
> + *num_maps = 0;
> +
> + ret = pinctrl_utils_reserve_map(pctrl_dev, map, &reserved_maps,
> + num_maps, 1);
> + if (ret) {
> + dev_err(pctrl->dev, "can't reserve map: %d\n", ret);
> + return ret;
> + }
> +
> + ret = of_property_read_u32(node, "berlin,function", &function);

Properties should be _vendor_ prefixed, i.e. "marvell,function".

> + if (ret) {
> + dev_err(pctrl->dev,
> + "missing 'berlin,function' property in node %s\n",
> + node->name);
> + return -EINVAL;
> + }
> +
> + ret = of_property_read_string(node, "berlin,group", &group_name);

ditto.

> + if (ret) {
> + dev_err(pctrl->dev,
> + "missing 'berlin,group' property in node %s\n",
> + node->name);
> + return -EINVAL;
> + }
> +
> + function_name = kzalloc(strlen(group_name) + 7, GFP_KERNEL);
> + if (!function_name)
> + return -ENOMEM;
> + snprintf(function_name, strlen(group_name) + 7, "%s_mode%d", group_name,
> + function);

With proper mode tables above, this can refer to a const char* and you
can get rid of allocation here. Also, below you already allocated
function_names, how is this one different from the below?

> +
> + ret = pinctrl_utils_add_map_mux(pctrl_dev, map, &reserved_maps,
> + num_maps, group_name, function_name);
> + if (ret) {
> + dev_err(pctrl->dev, "can't add map: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void berlin_pinctrl_dt_free_map(struct pinctrl_dev *pctrl_dev,
> + struct pinctrl_map *map,
> + unsigned nmaps)
> +{
> + int i;
> + for (i = 0; i < nmaps; i++) {
> + if (map[i].type == PIN_MAP_TYPE_MUX_GROUP) {
> + kfree(map[i].data.mux.group);
> + kfree(map[i].data.mux.function);
> + }
> + }
> +
> + kfree(map);
> +}
> +
> +static const struct pinctrl_ops berlin_pinctrl_ops = {
> + .get_groups_count = &berlin_pinctrl_get_group_count,
> + .get_group_name = &berlin_pinctrl_get_group_name,
> + .dt_node_to_map = &berlin_pinctrl_dt_node_to_map,
> + .dt_free_map = &berlin_pinctrl_dt_free_map,
> +};
> +
> +static int berlin_pinmux_get_functions_count(struct pinctrl_dev *pctrl_dev)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> + return pctrl->nfunctions;
> +}
> +
> +static const char *berlin_pinmux_get_function_name(struct pinctrl_dev *pctrl_dev,
> + unsigned function)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> + return pctrl->functions[function].name;
> +}
> +
> +static int berlin_pinmux_get_function_groups(struct pinctrl_dev *pctrl_dev,
> + unsigned function,
> + const char * const **groups,
> + unsigned * const num_groups)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> + *groups = &pctrl->functions[function].group;
> + *num_groups = 1;
> +
> + return 0;
> +}
> +
> +static int berlin_pinmux_enable(struct pinctrl_dev *pctrl_dev,
> + unsigned function,
> + unsigned group)
> +{
> + struct berlin_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> + struct berlin_pinctrl_group *group_desc = pctrl->groups + group;
> + struct berlin_pinctrl_function *function_desc =
> + pctrl->functions + function;
> + unsigned long flags;
> + u32 regval;
> +
> + spin_lock_irqsave(&pctrl->lock, flags);
> +
> + regval = readl(group_desc->reg);
> + regval &= group_desc->mask;
> + regval |= function_desc->muxval << group_desc->lsb;
> + writel(regval, group_desc->reg);
> +
> + spin_unlock_irqrestore(&pctrl->lock, flags);
> +
> + return 0;
> +}
> +
> +static const struct pinmux_ops berlin_pinmux_ops = {
> + .get_functions_count = &berlin_pinmux_get_functions_count,
> + .get_function_name = &berlin_pinmux_get_function_name,
> + .get_function_groups = &berlin_pinmux_get_function_groups,
> + .enable = &berlin_pinmux_enable,
> +};
> +
> +static int berlin_pinctrl_build_state(struct platform_device *pdev,
> + struct berlin_pinctrl_reg_base *bases,
> + unsigned nbases)
> +{
> + struct berlin_pinctrl *pctrl = platform_get_drvdata(pdev);
> + int i, j, cur_fct = 0;
> +
> + pctrl->ngroups = pctrl->desc->ngroups;
> + pctrl->nfunctions = 0;
> +
> + for (i = 0; i < pctrl->ngroups; i++) {
> + struct berlin_desc_group const *desc = pctrl->desc->groups + i;
> + pctrl->nfunctions += NFCTS(desc->bit_width);
> + }

As you need desc later on, make it global to this function. Then you
can also walk through it with desc++

desc = pctrl->desc->groups;
for (i = 0; i < pctl->ngroups; i++, desc++)
pctrl->nfunctions = ...

Having said that, the above assumes that each function is unique
but IIRC the idea of the function table was to group pins/groups
with the same function, e.g. function "gpio", groups 1,7,25,...

> + pctrl->groups = devm_kzalloc(&pdev->dev,
> + pctrl->ngroups * sizeof(struct berlin_pinctrl_group),
> + GFP_KERNEL);
> + if (!pctrl->groups)
> + return -ENOMEM;
> +
> + pctrl->functions = devm_kzalloc(&pdev->dev,
> + pctrl->ngroups * pctrl->nfunctions *
> + sizeof(struct berlin_pinctrl_function),
> + GFP_KERNEL);
> + if (!pctrl->functions)
> + return -ENOMEM;
> +
> + for (i = 0; i < pctrl->ngroups; i++) {
> + struct berlin_desc_group const *desc = pctrl->desc->groups + i;
> + struct berlin_pinctrl_group *group = pctrl->groups + i;
> +
> + group->name = desc->name;
> + group->mask = GENMASK(desc->lsb + desc->bit_width - 1,
> + desc->lsb);
> + group->lsb = desc->lsb;
> +
> + for (j = 0; j < nbases; j++) {
> + if (!strcmp(desc->base_name, bases[j].name)) {
> + group->reg = bases[j].base + desc->offset;
> + break;
> + }
> + }
> +
> + if (j == nbases) {
> + dev_err(pctrl->dev, "cannot find base address for %s\n",
> + desc->base_name);
> + return -EINVAL;
> + }

TBH, I am not so happy with this name<>reg relationship. What about
having two separate pin controllers instead?

> + for (j = 0; j < NFCTS(desc->bit_width); j++) {
> + struct berlin_pinctrl_function *function =
> + pctrl->functions + cur_fct;
> + char *function_name = devm_kzalloc(&pdev->dev,
> + (strlen(desc->name) + 7) * sizeof(char),
> + GFP_KERNEL);
> + if (!function_name)
> + return -ENOMEM;

Allocating function_names again?

> +
> + snprintf(function_name, strlen(desc->name) + 7,
> + "%s_mode%d", desc->name, j);
> +
> + function->name = function_name;
> + function->group = desc->name;
> + function->muxval = j;
> +
> + cur_fct++;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static struct pinctrl_desc berlin_pctrl_desc = {
> + .name = "berlin-pinctrl",
> + .pctlops = &berlin_pinctrl_ops,
> + .pmxops = &berlin_pinmux_ops,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct berlin_pinctrl_desc berlin2cd_pinctrl_data = {
> + .groups = berlin2cd_pinctrl_groups,
> + .ngroups = ARRAY_SIZE(berlin2cd_pinctrl_groups),
> +};
> +
> +static const struct berlin_pinctrl_desc berlin2q_pinctrl_data = {
> + .groups = berlin2q_pinctrl_groups,
> + .ngroups = ARRAY_SIZE(berlin2q_pinctrl_groups),
> +};
> +
> +static struct of_device_id berlin_pinctrl_match[] = {
> + {
> + .compatible = "marvell,berlin2cd-pinctrl",
> + .data = &berlin2cd_pinctrl_data
> + },
> + {
> + .compatible = "marvell,berlin2-pinctrl",
> + .data = &berlin2cd_pinctrl_data
> + },
> + {
> + .compatible = "marvell,berlin2q-pinctrl",
> + .data = &berlin2q_pinctrl_data
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, berlin_pinctrl_match);

Please sort alphabetically.

> +
> +static int berlin_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node;
> + struct property *prop;
> + struct berlin_pinctrl *pctrl;
> + struct berlin_pinctrl_reg_base *bases;
> + const struct of_device_id *device;
> + const char *reg_name;
> + int ret, i = 0;
> + unsigned nbases;
> +
> + if (!dev->of_node) {
> + dev_err(dev, "device node not found\n");

There is no way you will see this driver being called without
.of_node set. I'll really have an eye on anybody who will try
to introduce non-DT platform_device registration ;)

> + return -ENODEV;
> + }
> + node = dev->of_node;
> +
> + pctrl = devm_kzalloc(dev, sizeof(struct berlin_pinctrl), GFP_KERNEL);
> + if (!pctrl)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, pctrl);
> +
> + spin_lock_init(&pctrl->lock);
> +
> + device = of_match_device(berlin_pinctrl_match, dev);

With the comment above, you can move the assignment right to the
declaration. Also, it will always match.

> + if (!device) {
> + dev_err(dev, "pinctrl didn't match\n");
> + return -ENODEV;
> + }
> +
> + nbases = of_property_count_strings(node, "reg-names");
> + if (nbases < 0) {
> + dev_err(dev, "missing 'reg-names' property in node %s\n",
> + node->name);
> + return -EINVAL;
> + }

See my comment about names<>reg relation.

> + bases = devm_kzalloc(dev,
> + nbases * sizeof(struct berlin_pinctrl_reg_base),
> + GFP_KERNEL);
> + if (!bases)
> + return -ENOMEM;
> +
> + of_property_for_each_string(node, "reg-names", prop, reg_name) {
> + struct resource *r =
> + platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + reg_name);
> + bases[i].base = devm_ioremap_resource(&pdev->dev, r);
> + if (IS_ERR(bases[i].base))
> + return PTR_ERR(bases[i].base);
> +
> + bases[i].name = reg_name;
> + i++;
> + }
> +
> + pctrl->desc = (struct berlin_pinctrl_desc *)device->data;
> +
> + ret = berlin_pinctrl_build_state(pdev, bases, nbases);
> + kfree(bases);
> + if (ret) {
> + dev_err(dev, "cannot build driver state: %d\n", ret);
> + return ret;
> + }
> +
> + pctrl->dev = &pdev->dev;
> +
> + pctrl->pctrl_dev = pinctrl_register(&berlin_pctrl_desc, dev, pctrl);
> + if (!pctrl->pctrl_dev) {
> + dev_err(dev, "failed to register pinctrl driver\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver berlin_pinctrl_driver = {
> + .probe = berlin_pinctrl_probe,
> + .driver = {
> + .name = "berlin-pinctrl",
> + .owner = THIS_MODULE,
> + .of_match_table = berlin_pinctrl_match,
> + },
> +};
> +module_platform_driver(berlin_pinctrl_driver);
> +
> +MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
> +MODULE_DESCRIPTION("Marvell Berlin pinctrl driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/pinctrl/pinctrl-berlin.h b/drivers/pinctrl/pinctrl-berlin.h
> new file mode 100644
> index 000000000000..db3e8a379e84
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-berlin.h
> @@ -0,0 +1,72 @@
> +/*
> + * Marvell Berlin SoC pinctrl driver.
> + *
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Ténart <antoine.tenart@free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#ifndef __PINCTRL_BERLIN_H
> +#define __PINCTRL_BERLIN_H
> +
> +struct berlin_desc_group {
> + const char *name;
> + const char *base_name;
> + u32 offset;
> + u32 bit_width;
> + u32 lsb;

You expect any offsets, bit_widths or lsbs at 2^32-1 ? ;)

Sebastian

> +};
> +
> +struct berlin_pinctrl_base_reg {
> + void __iomem *base;
> + const char *name;
> +};
> +
> +struct berlin_pinctrl_desc {
> + const struct berlin_desc_group *groups;
> + unsigned ngroups;
> +};
> +
> +struct berlin_pinctrl_group {
> + const char *name;
> + void __iomem *reg;
> + u32 mask;
> + u32 lsb;
> +};
> +
> +struct berlin_pinctrl_function {
> + const char *name;
> + const char *group;
> + u32 muxval;
> +};
> +
> +struct berlin_pinctrl {
> + spinlock_t lock;
> + struct device *dev;
> + struct berlin_pinctrl_desc *desc;
> + struct berlin_pinctrl_group *groups;
> + unsigned ngroups;
> + struct berlin_pinctrl_function *functions;
> + unsigned nfunctions;
> + struct pinctrl_dev *pctrl_dev;
> +};
> +
> +struct berlin_pinctrl_reg_base {
> + const char *name;
> + void __iomem *base;
> +};
> +
> +#define BERLIN_PINCTRL_GROUP(_name, _base_name, _offset, _width, _lsb) \
> + { \
> + .name = _name, \
> + .base_name = _base_name, \
> + .offset = _offset, \
> + .bit_width = _width, \
> + .lsb = _lsb, \
> + }
> +
> +#endif /* __PINCTRL_BERLIN_H */
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-04-11 11:21    [W:1.024 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site