lkml.org 
[lkml]   [2014]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 1/2] SPI: Add driver for Cadence SPI controller
From
Hi Mark,

On Thu, Apr 10, 2014 at 5:51 PM, Mark Brown <broonie@kernel.org> wrote:
> On Thu, Apr 10, 2014 at 05:43:49PM +0530, Harini Katakam wrote:
>
>> Firstly, the timeout value obtained from this is a too low.
>> This timeout is typically used for an error conditions such as
>> hardware hang etc. and using a value >1*HZ would be better.
>> This driver used to use similar timeout and as I understand, other
>> drivers also use similar values.
>
> Send patches...

Ok thanks, I will.

Regards,
Harini


\
 
 \ /
  Last update: 2014-04-10 15:01    [W:0.078 / U:63.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site