Messages in this thread Patch in this message | | | From | Alexander Holler <> | Subject | [PATCH regression] net: phy: fix initialization (config_init) for Marvel 88E1116R PHYs | Date | Wed, 2 Apr 2014 01:55:59 +0200 |
| |
Commit 7cd1463664c2a15721ff4ccfb61d4d970815cb3d (introduced with 3.14) changed the initialization of the mv643xx_eth driver to use phy_init_hw() to reset the PHY. Unfortunately the initialization for the 88E1116R PHY was broken such, that it used mdelay() instead of really waiting for a reset to finish.
The effect was that the ethernet on my Kirkwood 88F6281 based device didn't come up anymore (no carrier).
Fix this by waiting for a reset to finish before proceeding further.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Cc: Michal Simek <michal.simek@xilinx.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: <stable@vger.kernel.org> --- drivers/net/phy/marvell.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index bd37e45..5b84808 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -396,7 +396,9 @@ static int m88e1116r_config_init(struct phy_device *phydev) if (err < 0) return err; - mdelay(500); + do + temp = phy_read(phydev, MII_BMCR); + while (temp & BMCR_RESET); err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0); if (err < 0) @@ -429,7 +431,9 @@ static int m88e1116r_config_init(struct phy_device *phydev) if (err < 0) return err; - mdelay(500); + do + temp = phy_read(phydev, MII_BMCR); + while (temp & BMCR_RESET); return 0; } -- 1.8.3.1
| |