lkml.org 
[lkml]   [2014]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] ARM: tegra: dalmore: add thermal zones for nct1008
On 03/04/2014 07:30 PM, Wei Ni wrote:
> On 03/05/2014 06:23 AM, Guenter Roeck wrote:
>> On Tue, Mar 04, 2014 at 03:06:48PM -0700, Stephen Warren wrote:
>>> On 03/04/2014 04:31 AM, Wei Ni wrote:
>>>> Add dt node to describe the thermal zone for the nct1008.
>>>>
>>>> Change-Id: I0256836e52d73ec282574e4fd91df52958936e35
>>>
>>> ???????
>>>
>> I think this is for one of those open-source sites out there
>> which count open source contributions. Not Ohloh, but similar.
>> You have to specify that Change-Id to have it associate your
>> name with the patch.
>
> It's so sorry, I'm working for chromiumos, this change-id is generated
> by gerrit, I should remove it.
>
>>
>> Guenter
>>
>>>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>>>
>>>> + thermal-zones {
>>>> + nct1008-local {
>>>> + polling-delay-passive = <2000>; /* milliseconds */
>>>
>>> Nothing can possible make use of this node, since there's no compatible
>>> value or anything else like that to bind a driver to it.
>
> We have special Tskin driver that estimator skin temperature based on
> nct1008 local and remote sensors.

Where? Anything that gets added to the upstream kernel DT files must be
supported by a driver and binding in the upstream kernel.



\
 
 \ /
  Last update: 2014-03-07 03:41    [W:0.108 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site