lkml.org 
[lkml]   [2014]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/1] Add documentation for proper usage and order of preference of calls to print diagnostic messages.
This patch adds documentation that clarifies the use of various
diagnostic printing messages. It shows the preference of subsystem_dbg
calls to dev_dbg (whenever possible), as they first preferred format of
logging debug messages.
Signed-off-by: Yogesh Chaudhari <mr.yogesh@gmail.com>
---
Documentation/CodingStyle | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 7fe0546..083f738 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -662,6 +662,23 @@ and driver, and are tagged with the right level: dev_err(), dev_warn(),
dev_info(), and so forth. For messages that aren't associated with a
particular device, <linux/printk.h> defines pr_debug() and pr_info().

+If the subsystem has its own diagnostic macros then they should be used
+instead of dev_dbg calls.
+e.g. If you are using network subsystem, use netdev_dbg;
+if you are using V4L, use v4l_dbg etc.
+This standardises the output format in every subsystem.
+
+Depending on your changes, the following order of precedence
+applies to printing messages:
+1. [subsystem]_dbg() is preferred when the subsystem has its own
+diagnostic macros.
+2. dev_dbg() is preferred when you have a generic struct device object.
+3. pr_debug() should be used when 1 and 2 above are not applicable.
+4. printk() should be avoided.
+
+Note: The above order applies to diagnostic calls of all log levels viz:
+*_emerg, *_alert, *_crit, *_err, *_warn, *_notice, *_info and *_dbg.
+
Coming up with good debugging messages can be quite a challenge; and once
you have them, they can be a huge help for remote troubleshooting. Such
messages should be compiled out when the DEBUG symbol is not defined (that
--
Regards
Yogesh
On Tue, Mar 04, 2014 at 02:39:42PM +0100, Levente Kurusa wrote:
> Hi,
>
> 2014-03-04 12:48 GMT+01:00 yogesh <mr.yogesh@gmail.com>:
> > This patch adds documentation that clarifies the use of various diagnostic printing messages. It shows the preference of subsystem_dbg calls to dev_dbg (whenever possible), as the first preferred format of logging debug messages.
>
> Please wrap your changelog at 80 characters a line.
>
> > Signed-off-by: Yogesh Chaudhari <mr.yogesh@gmail.com>
> > ---
> > Documentation/CodingStyle | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
> > index 7fe0546..9e0de25 100644
> > --- a/Documentation/CodingStyle
> > +++ b/Documentation/CodingStyle
> > @@ -662,6 +662,20 @@ and driver, and are tagged with the right level: dev_err(), dev_warn(),
> > dev_info(), and so forth. For messages that aren't associated with a
> > particular device, <linux/printk.h> defines pr_debug() and pr_info().
> >
> > +If the subsystem has its own diagnostic macros then they should be used
> > +instead of dev_dbg calls.
> > +e.g. If you are using network subsystem, use netdev_dbg;
> > +if you are using V4L, use v4l_dbg etc.
> > +This standardises the output format in every subsystem.
> > +
> > +Depending on your changes, the following order of precedence
> > +applies to printing messages:
> > +1. [subsystem]_dbg() is preferred when you the
>
> The 'you' is unnecessary and incorrect.
>
> > +subsystem has its own diagnostic macros.
> > +2. dev_dbg() is preferred when you have a generic struct device object.
> > +3. pr_debug() is used when 1 and 2 above are not applicable.
>
> I think it's better to say "should be used".
>
> > +4. printk() should be avoided.
> > +
> > Coming up with good debugging messages can be quite a challenge; and once
> > you have them, they can be a huge help for remote troubleshooting. Such
> > messages should be compiled out when the DEBUG symbol is not defined (that
>
> I think we should also mention *_warn, *_err etc not just *_dbg.
>
> --
> Regards,
> Levente Kurusa


\
 
 \ /
  Last update: 2014-03-04 16:01    [W:0.057 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site